Reviews 2 5 inch Hdd Cases

KOOBOOK 2Pcs 5.25\ to 3.5\ 2.5\ SSD HDD Tray Caddy Case Adapter Hard Disk Drive Bays Holder Cooling Fan Mounting Bracket for PC

  • You can use it for 1 drive,2.5" SSD or 3.5" HDD.Supports computer cases with an available 5.25 inch drive bay.
  • allow to Mount 1x 3.5 - inch （or 2.5 inch or SSD）Drive and 1x 12cm fan..
  • Above Install hard disk , below install the fan. Make sure the hard disk high speed read and extend drive life..
  • when you install a fan, it will account more than a optical drive..
  • This adapter can adapts any 2.5" or 3.5" form factor drive to 5.25" drive tray..
  • Dimension 145 x 120 x 8mm(L x W x H)/ approx. 5.71 x 4.72 x 0.31 inch..
Check Stock

MUSETEX ATX PC Case Pre-Install 6 PWM ARGB Fans Mid Tower Gaming Case with Opening Tempered Glass Side Panel Door Mesh Computer Case TW8

  • After view MUSETEX item description,you will surely buy it,not choose other brands.Because you can't find a better configuration than ours at this price.Reasons:①Has 6 auto-adjustable speed PWM ARGB fans.
  • ②Computer cases Bestselers top10 are all old designs,none of which are as popular as our cases that have side opening door.No need to remove screws,can super easily open inner case to clean radiator and graphics card dust,also easy to put in different dolls.Friends will think your case is cool!.
  • 6 Highly Configurable PWM ARGB Fans Pre-installed- (1) Ensure your motherboard has a 3PIN rgb interface and use the motherboard lighting software to control the fans, each addressable ARGB fan can offer 16.8 million colors of special customizable lighting. (2) Adjustable speed PWM fans allow pc case for better silence and better cooling depending on demand. Also the fan with new upgraded bearings greatly extends the service life. Easy disassembly operation facilitates PC hardware assembly..
  • Expensive Glass Side Door - Not only is it more stylish than other brands of gaming cases, but it also solves cooling problems much better. Tempered glass side panel with metal pull ring and magnets that can be opened at any time for 76% better cooling than non-side-open....
Check Stock

MUSETEX ATX PC Case Pre-Install 6 PWM ARGB Fans, Mid-Tower Gaming Case with Opening Tempered Glass Side Panel Door, Mesh Computer Case, TW8

  • After view MUSETEX item description,you will surely buy it,not choose other brands.Because you can't find a better configuration than ours at this price.Reasons:①Has 6 auto-adjustable speed PWM ARGB fans.
  • ②Computer cases Bestselers top10 are all old designs,none of which are as popular as our cases that have side opening door.No need to remove screws,can super easily open inner case to clean radiator and graphics card dust,also easy to put in different dolls.Friends will think your case is cool!.
  • 6 Highly Configurable PWM ARGB Fans Pre-installed- (1) Ensure your motherboard has a 3PIN rgb interface and use the motherboard lighting software to control the fans, each addressable ARGB fan can offer 16.8 million colors of special customizable lighting. (2) Adjustable speed PWM fans allow pc case for better silence and better cooling depending on demand. Also the fan with new upgraded bearings greatly extends the service life. Easy disassembly operation facilitates PC hardware assembly..
  • Expensive Glass Side Door - Not only is it more stylish than other brands of gaming cases, but it also solves cooling problems much better. Tempered glass side panel with metal pull ring and magnets that can be opened at any time for 76% better cooling than non-side-open....
Check Stock

MUSETEX ATX PC Case Pre-Install 6 PWM ARGB Fans Polygonal Mesh Computer Gaming Case Opening Tempered Glass Side Panel Mid-Tower Case USB 3.0 x 2 Black NN8

  • After view MUSETEX item description,you will surely buy it,not choose other brands.Because you can't find a better configuration than ours at this price.Reasons:①Has 6 PWM ARGB fans.
  • ②Computer cases Bestselers top10 are all old designs,none of which are as popular as our cases that have side opening door.No need to remove screws,can super easily open inner case to clean radiator and graphics card dust,also easy to put in different dolls.Friends will think your case is cool!.
  • 6 Highly Configurable PWM ARGB Fans Pre-installed- (1) Ensure your motherboard has a 3PIN rgb interface and use the motherboard lighting software to control the fans, each addressable ARGB fan can offer 16.8 million colors of special customizable lighting. (2) Adjustable speed PWM fans allow pc case for better silence and better cooling depending on demand. Also the fan with new upgraded bearings greatly extends the service life. Easy disassembly operation facilitates PC hardware assembly..
  • Expensive Glass Side Door - Not only is it more stylish than other brands of gaming cases, but it also solves cooling problems much better. Tempered glass side panel with metal pull ring and magnets that can be opened at any time for 76% better cooling than non-side-opening mid-tower pc cases....
Check Stock

Geekworm NASPi Gemini Dual 2.5'' SATA HDD/SSD NAS Storage Kit with Safe Shutdown & Auto Power On & RAID Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

  • ...exceeding 16mm, 2.5" HDD/SSD on the market are 7mm, 9.5mm, 12mm and 15mm thickness.(Recommend to use HDD.).
  • 【Function】Raspberry Pi 4 Dual SATA SSD Case Kit With safe shutdown, auto power on and RAID function. With 4010 PWM cooling fan, UASP supported Only..
  • 【Wifi Description】Because the shielding of the metal cases will cause the loss of 2.4G wifi signal, only recommend to use Ethernet or 5G WiFi..
  • 【Button Switch Operation】Press to turn on.
  • Press and hold for 1~2 seconds to reboot.
  • Press and hold for 3 seconds to safe shutdown, Press and hold for 8 seconds to force shutdown (need to install shell script firstly).
  • 【Packing List】1 x NASPi Gemini Metal Case.
  • 1 x X882 V1.3 Dual 2.5'' SATA HDD Shield.
  • 1 x 3pin 4010 PWM fan with metal bracket.
  • Note: not inlcude Raspberry Pi 4, HDD/SSD or power adapter..
Check Stock

PASOW 2.5'' 3.5'' to 5.25'' SSD HDD Mounting Bracket Internal Hard Disk Drive Bays Holder Adapter for PC

  • You can use it for 2 drives,2.5" SSD and 3.5" HDD.Allow to mount a 3.5 inch drive and a 2.5 inch drive (or a 8cm fan) to a 5.25 inch drive bay in your computer case at the same time..
  • Converts an available 5.25" HDD bay drive to accommodate 3.5" HDD or 2.5'' SSD (Solid State Drive)..
  • Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk..
  • Mounting the 2.5'' drive firstly when you mount 3.5'' drive and 2.5'' drive at the same time,you can mount 8cm fan at the back if not mount 2.5'' hard disk..
  • Made of plastic body,quick and easy installation.
Check Stock

Cable Matters 2-Pack 6 Gbps SATA III to eSATA Cable 3 Feet

  • Backwards compatible with SATA I, II, III hard drives.
  • Fully shielded & flexible eSATA to SATA cable is engineered to reduce EMI noise interference.
  • Latching SATA connector attaches securely for a trouble-free installation.
  • Flexible cable jacket allows installation in tight computer cases.
  • SATA and eSATA connectors are keyed differently to avoid connecting incorrectly.
  • Cost-effective 2-pack provides spare or superior replacement SATA to ESATA cable cable to fix troublesome connection problems.
  • Longer cable length allows location of an external hard drive in a convenient location.
  • Low cost way to add eSATA when you have a free internal SATA port or to repurpose older SATA internal hard drives..
  • Compatible with Acomdata eSATA HDD Enclosure, Anker eSATA HDD Docking Station, Fantom External HDD, Fantom GreenDrive eSATA External HDD, Kanex Thunderbolt to eSATA Adapter, Mediasonic ProBox 4 Bay HDD Enclosure, Sabrent ESATA HDD Enclosure, StarTech PCI Express eSATA Controller, 4 Bay eSATA HDD Docking Station, TiVo Roamio HD Digital Video Recorder, Thermaltake BlacX eSATA Docking Station, Duet eSATA Dual HDD Docking Station, Vantec NexStar eSATA HDD Enclosure, WD My Book AV DVR Expander.
Check Stock

Cinolink 5.25 to 3.5 Drive Bay Adapter HDD SSD Mounting Bracket 5.25 inch to 2.5 or 3.5 Inch Internal Hard Disk Drive Mounting Kit with Screws and Shock Absorption Rubber Washer- Black

  • Compatible with any 2.5 or 3.5 inch IDE, SATA or SAS hard drive and solid state drive..
  • The separate rubber washer and screws provide excellent heat dispersion and shock absorption..
  • Compatible with computer cases with a 5.25-inch drive bay (screw-in type).
  • Allows you to mount a 3.5-inch drive and a 4 x 2.5-inch drive..
  • What's in the box: 1 HDD mounting kit, 4 rubber grommets, 16 mounting screws..
Check Stock

PULABO Simple and Sophisticated DesignUSB 3. 0 to SATA 2. 5' Hard Drive Adapter Supports SATA 2. 5 inch HDD and SSD Stylish and Popular

  • OS Compatibility Supports Laptop, Desktop, 2.5 inch SATA , 2.5 inch HDD, HDTV, Andriod smarthphones OTG function..
  • Service: We love our customer, your satisfaction is our priority, contact us if you have any question, we will try our best to solve any problem you meet..
  • Super FastSuperSpeed Data: Supports super-fast USB 3.0 data transfer rates to ensure data transfers in the minimum time possible. (Actual transmission rate depends on the capability of the connected HDD/SSD, up to 3Gbps.) Also backwards-compatible with the slower USB 2.0..
  • Easy Plug and Play: Straightforward interface turns bare hard drives and SSDs into readable USB devices..
  • PULABO Simple and Sophisticated DesignUSB 3. 0 to SATA 2. 5" Hard Drive Adapter Supports SATA 2. 5 inch HDD and SSD Stylish and Popular.
Check Stock

FIDECO Hard Drive Docking Station, USB 3.0 SATA HDD Docking Station for 2.5 & 3.5 inch SATA HDD/SSD, Dual Bay, Support Offline Clone and 2X 16TB Hard Drives

  • 【Universal Compatibility】FIDECO SATA HDD docking station is universally compatible with Windows XP/ Vista/ 7/ 8 /8.1/ 10/ Mac OS/ Linux. Please note that it only supports SATA HDD/SSD..
  • 【USB 3.0 Super Speed】FIDECO hard drive docking station supports USB3.0 super fast data transfer speed with rates up to 5Gbps..
  • 【Offline Clone】FIDECO docking station supports offline clone! You just need to insert 2 HDDs into the respective station bays and press the “Clone” button for 5 seconds until the LED indicator flashes. The clone can be completed with no computer needed!.
  • 【32TB Capacity】FIDECO HDD docking station can support 2x 16TB hard drive simultaneously for 2.5/3.5 inch SATA I/II/III HDD/SSD with exquisite design. Absolutely no driver needed and tool-free installation..
  • 【FIDECO HDD Docking Station】FIDECO docking station provides an easy way to add HDD/SSD to your computer. It offers you the flexibility of connecting two 2.5″/3.5″ SATA HDD/SSD to your computer. Plug and play!.
Check Stock

ORICO USB 3.0 to SATA External Hard Drive 5 Bay Docking Station with Duplicator Offline Clone Function for 2.5 or 3.5in HDD, SSD Support 5X 10 TB

  • 1.【50TB Large Capacity & Compatible 2.5/3.5 inch HDD SSD】: External 5 Bay hard drive docking station support up to 50TB (5x 10TB hard drives), compatible with 2.5 inch / 3.5inch SATA I II III HDD SSD hard drives, Perfect solution for backup and processing IT data, batch processing data, formatting, file transfers, data recovery, gaming data backup, etc..
  • 2.【Offline Clone and Duplicator 】: The Orico 5 Bay External hard drive docking station can be used to Offline offline cloning / Duplicator from an source hard drive to target disk without connecting to a computer, or as external storage to transfer data between a hard drive and your computer..
  • 3.【USB 3.0 Hard Drive Dock Superspeed up to 5 Gbps】: SuperSpeed USB 3.0 Hard Drive Enclosure DOwith data transfer rates up to 5Gbps, support UASP Protocol. 20% faster than the traditional USB 3.0, and backward compatible with USB2.0 and USB1.1..
  • 4.【Tool-free & 180° Heat dissipation Function】Plug and Play, No reboot and additional driver needed, hot-swapping, easy and quick Tool-Free installation. Hard Drive Stock With the movable design, the hard drive is more stable and Open-type design brings better heat dissipation function..
  • 5.【Compatible Operating System】: The 5 Bay HDD SSD Docking Station....
Check Stock

Zerone 5.25 to 3.5 / 2.5 Bay Mounting Bracket Kit 5.25 Bay SSD to Dual 2.5 HDD/SSD & One 3.5 HDD/Device Front Bay with Mounting Screws

  • [Good Function] This plastic, floppy-drive adapter bracket lets you install 2.5inch / 3.5inch floppy drives into a 5.25 inch bay..
  • [Value Upgrade Of PC Drive Bay] Included mounting screws. Comes with a baffle. Multifunctional combination to improve the use value of PC drive bay..
  • [Practical] Fits 2 x 2.5 inch HDD / SSD + 1 x 3.5inch HDD..
  • [High Quality] Made from engineering plastics, strong and durable, which can support long time use..
  • [Wide Compatibility] This floppy-drive bracket is compatible with standard 5.25inch bay of PC..
Check Stock

StarTech.com 2.5\ HDD / SDD Mounting Bracket for 3.5\ Drive Bay - Tool-less Installation - 2.5 Inch SSD HDD Adapter Bracket (BRACKET125PT), Black

  • TOOL-LESS INSTALLATION: Use this 2.5" HDD / SDD mounting bracket to easily install one 2.5 inch SSD or HDD into a 3.5 inch drive bay on your desktop PC without the need of tools..
  • SAVE TIME: Helping to save valuable time and effort on installation projects, this 2.5" mounting bracket is ideal for system administrators and integrators. Simply install and secure the 2.5" hard drive or solid state drive into a 3.5" bay..
  • BROAD COMPATIBILITY: This 2.5 in HDD / SDD mount is compatible with most 2.5" SSD / HDD drives including: IDE, SAS, SATA, U.2 and more, providing users with ultimate compatibility..
  • DRIVE HEIGHT RANGE: This 2.5 inch SSD / HDD mounting kit for 3.5 inch drive bay supports drives 7 mm or 9.5 mm in height..
Check Stock