Reviews 2 5 Inch Mounting Bracket

1000LED 180 Degree Triple Bullhorn Mounting Bracket for 3 Lights 2.7 Inch Round Pole LED Shoebox Street Light Flood Light Mounting Accessories.

  • Triple Bullhorn Mounting Bracket for 3 inch round pole, bullhorn led mounting bracket accesaries.
  • Bullhorn lighting mounting bracket for 3 lights of 2-3/8 slip fitter mounting light.
  • Bracket is easy to install, hardware screws is including in package..
  • Led lighting bullhorn mounting bracket for led flood light, shoebox parking lot light, street light.
  • Demension: For inside diameter 2.7 inch round pole, outside diameter 3 inch round pole, 2-3/8 inch slip fitter led lights.
Check Stock

Electrodepot 433 MHz Unity Gain Omni, 6 Inches Antenna with Magnetic Base and Male SMA Connector Impedance 50 Ohms

  • Digi-Code 5166-03 Radio Receiver Remote Antenna Mounting Kit With 15' Coaxial Cable With F-Connectors, Antenna And Antenna Mounting Bracket. Ideal for use with radio receivers that have the F-connector type antenna typically used on gate openers when a remote antenna is needed to improve remote control signal reception and range..
  • Product Description: Remote Antenna Mounting Kit Ideal For Commercial And Gate Radio Receivers The Digi-Code 5166-03 also known as the DC-5166-03 remote antenna mounting kit is ideal for use with F-connector versions of gate radio receivers to improve signal reception and remote control range. This remote antenna kit allows the antenna to be located in more desirable location to increase the operating range especially with gate openers that use a metal cover, which tends to block the signal from.
  • Product Features: Works with all brands of radio receivers that use a standard F-connector type antenna. 15 feet commercial grade coaxial cable F-connector and rubber boot on each end 5 inch long by 2 inch L bracket with 2 mounting screw holes F-connector barrel connector on L bracket 10 inch whip type antenna with F-connector One-Year manufactures warranty.
Check Stock

VCE Low Voltage Mounting Bracket 1 Gang 5 Pack for Single Gang Wall Plate Telephone Wires Network Cables HDMI Coaxial Speaker Cables Black

  • VCE single gang (1-gang) low voltage mounting bracket - black (pack of 5)..
  • Adjusts to fit 1/4-inch to 1-inch thick wall board, paneling, or drywall.
  • Easy to install, for mounting low voltage wires(phone, internet, TV, video)..
  • Horizontal or vertical mounting, adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened..
  • Package contents:5 x Single Gang Low Voltage Mounting Bracket Pieces per plastic bag..
Check Stock

Woodlink HDPOLE 3 Piece Pole Mount Kit

  • Three pieces includes the 72-inch pole, mounting bracket and ground socket.
  • 6-inch by 2-inch mounting plate screws onto bottom of feeder to hold pole.
  • Three pieces includes the 72"pole, mounting bracket and ground socket.
  • 6" by 2" mounting plate screws onto bottom of feeder to hold pole.
  • 1" outside diameter, powder coated steel.
Check Stock

Jiozermi 2 Pcs Motor Mounting Bracket, Motors Bracket, L-shape Fixed Seat, Motor Holder Fit for 550 540 545 555 motor

  • ▶【Package Contain】: You will receive 2 pcs electric motor mount and 4 Pcs screws. It can fit to 550 540 545 555 motor as a bracket or holder..
  • ▶【Brackets Size】: The base size of motor install bracket is 1.74x1.83x1.5 inch(L*L*W), The install hole diameter is 0.52 inch, Thickness is 0.06 inch, Mounting hole diameter is 0.13 inch..
  • ▶【Product Material】: The motor bracket is made of steel with adopting electroplating process for durable, strength, good anti-rust and not easy to bent..
  • ▶【Widely Application】: The electric motor mounting bracket fits for small gear stepper motor and great for the model car, robot. It allow you to fit your motor into a smaller space..
  • ▶【100% Happy Customers】: Jiozermi feel confident that you'll love our product, that we'll give your money back if you're not thrilled with your purchase within 30 days. Simply contact us to make it right..
Check Stock

Universal Replacement Vertical Mounting Bracket Blinds Mounting Snap Fixed Code Roll Curtain （38mm 1.5inch） 2Pack

  • Sturdy and Durable : The mounting brackets are made of metal. They are durable, not easy to break and deform, and can be used for a long time..
  • Universal Replacement : These Mounting brackets with 1-1 / 2 inch wide head rail or track are suitable for most vertical blinds..
  • Easy to Install : Fix the bracket and buckle the vertical shutters. You can install the mounting bracket according to the instruction..
  • Select Numbers : 2-piece mounting bracket : Suitable for Vertical Blinds with a width of less than 55.1 inch (140cm) . 3-piece mounting bracket :....
  • Warranty : We provide a one-year warranty, please contact us if you have any questions, we will reply to your message in time..
Check Stock

NOKINS Golf Cart 4 Sets of Retractable seat Belt Kit, with Brackets Stainless Steel Bolt, for EZGO Yamaha Club Car

  • Fits for most CLUB CAR, EZGO and YAMAHA models with aftermarket rear seats. Applicable to some CLUB CAR, EZGO and YAMAHA models with factory rear seats. ( Please check if the bracket size indicated in the picture is suitable for your model ).
  • High-quality powder coating treatment, stainless steel bolts, to avoid rusting of bolts after installation, easy installation, high elastic belt, strong bracket, no need to drill.
  • Two lengths of fixed installation iron plates are suitable for more backrest brackets or ceiling brackets. Belts Bracket Kit size: 35" x 6.9".
  • Retractable Seat Belt length: 42". for 4 passengers golf cart with back seat.
  • The kit includes: 1 universal bracket, 4 sets of retractable belts, 2 PCS 2-inch pitch mounting plates, 2 PCS 2 5/8-inch plates and the required stainless steel mounting hardware..
  • NOKINS is committed to producing high quality and improved products with patented designs. If there is any problem with the product, please feel free to contact us and we will provide after-sales service for you as soon as possible..
Check Stock

Ultra Durable 8269145 Undercounter Dishwasher Mounting Bracket Replacement part by BlueStars - Exact Fit for Kenmore Whirlpool KitchenAid Dishwashers - Replaces WP8269145 AP3039168 - PACK OF 2

  • ✅ STRONG PROTECTOR: 8269145 Undercounter Dishwasher Mounting Bracket secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of durable metal. This part fixes the following symptoms: Door latch failure | Door won’t close.
  • ✅ PERFECT MATCH: 8269145 replaces part numbers: WP8269145, WP8269145VP, AP3039168, PS393134, 830941, AH393134, EA393134, PS11745496, etc. It is made exactly fit for most top name brands (KitchenAid, Whirlpool, Kenmore, Maytag, Jenn-Air, Amana, Estate, Magic Chef, Inglis, Crosley, Roper).  If you are unsure about the compatibility, please message us to confirm anytime!.
  • ✅ PREMIUM STEEL: The mounting bracket is approximately 3.08"(L) x 0.58"(H). It is made of high-quality galvanized steel, which can be used for a long time. 8269145 Undercounter Dishwasher Mounting Bracket is well-tested by the manufacturer, so it meets OEM standards and ensures long-lasting and effective performance..
  • ✅ EASY TO INSTALL: These are simple manipulations but will help you to fix everything within a few minutes. 8269145 Undercounter Dishwasher Mounting Bracket by BlueStars is the best solution for DIY repairs. You can install....
Check Stock

Hotop Blind Brackets Low Profile Box Mounting Bracket for Window Blinds White

  • Package includes: 6 pieces (3 sets) blind brackets in white, each set has left and right mounting bracket, which can be installed in one blind stand,....
  • Size information: the low profile box mounting bracket is 2 2/1 inch in width, 1 3/4 inch in height and 1 inch in depth, suitable for headrail that....
  • Durable material: box mounting brackets are made of iron, durable and sturdy, not easy to break or deform, and can be applied for a long time.
  • White color: classic, concise and generous, it can match with the curtain of a variety of styles and household adornment.
  • Application occasions: the low profile box mounting bracket can be installed on the top of the blind frame, the side or the back of the window casing,....
Check Stock

Mounting Dream Long Arm TV Wall Mount for Most 37-75 inch Flat Curve TV, Long Extension to 32” Full Motion Corner TV Mount TV Bracket Swivel Tilt, Articulating Mount for 16-24” Stud, 100lbs MD2285-LB

  • ...cket comes with 32 inch long extended articulating arm, leading to greater range of motion and increased flexibility, especially for large screen TV. When fully retract, this wall mount for TV is merely 2.8” from wall, surely keeping slim and sleek. Say, always ok to work as corner TV mount or just a universal TV mounting bracket on flat wall, your choice..
  • [ Versatile TV Wall Mount ] The 32 inch long extension arm makes this product a true full motion TV bracket. For up to 75 inch TV, this TV hanger, MD2285-LB, could do 180 degree smooth swivel, exactly swinging left 90° or right 90°. Well, by meaning “full”, this mount comes with other two common articulating mount features. The mounting plate can be tilted 5° up or 12° down, much broader range than small angled TV mount could do. Also, TV plate can be adjusted after installation, by leveling ±3°.
  • [ Universal TV Bracket ] This swivel TV mount supports 37-75 inch flat screen or curved TV with standard VESA pattern from 200x100mm to 600x400mm, like general 42, 43, 50, 55, 65, 70, 75 inches Samsung/TCL/LG/Sony/Vizio/Insignia LCD, LED, OLED TVs, name it. And it fits concrete/brick wall (anchor needed), as well as 16”, 18”, 24” spacing wood stud. (Drywall alone excluded).
Check Stock

HELLA 007424801 Twin Trumpet High/Low Tone 12V Horn Kit with Bracket, Red

  • Hella's ultra-reliable trumpet horns look and sound like nothing else on the road. These horns guarantee the attention needed in critical situations..
  • Trumpet horns are for the performance oriented driver for whom a high level of safety combined with great design and high quality is key..
  • HELLA horns guarantee best functionality, optimum fit and long lasting customer satisfaction..
  • Original equipment quality horns you can trust from a global leader in automotive technologies for more than 100 years ..
  • Trumpet horns come with a M8 screw horn bracket and with flat connections of 6.3 mm, open, blade type..
  • High tone: 500 Hz - Low tone: 400 Hz - Sound level: 110 dB(A) - Voltage / Amps: 12Volts/6Amps.
  • Kit includes: 1 high-tone 500Hz horn, 1 low-tone 400Hz horn, 1 relay, 2 mounting brackets and mounting instructions.
  • Dimensions: 5.00 inch high x 4.30 inch wide x 3.2 inch diameter including mounting bracket.
Check Stock

JunSun Recessed Toilet Paper Holder Brushed Nickel Stainless Steel Toilet Paper Roll Holder Tissue Holder Modern Tissue Roll Holder 6 X 6 Square Jumbo Mega Roll Holder Rear Mounting Bracket Included

  • 100% STAINLESS STEEL CONSTRUCTION-Compared with other similar products which is constructed of zinc and aluminum with plastic brackets &bar, our product is 100% 304 stainless steel, including the main body, brackets and bar, even the rear mounting bracket. Stainless steel construction provides long-lasting durability, also it can protect against corrosion & rust..
  • BRUSHED NICKEL FINISH-Hand brushed nickel finish, including the main body, brackets and bar, even the rear mounting bracket. Ensuring every detail of the product is perfect, building to resist daily scratches, corrosion and tarnishing..
  • MULTI-USE - It can be mounted to a hollow wooden wall or wooden bathroom cabinet (hardware & rear mounting bracket included), also can be mounted to a solid cement wall (hardware included)..
  • EASY INSTALLATION - Complete with all the mounting accessories needed, including premium stainless steel screws, top quality anchors and rear mounting bracket..
  • DIMENSIONS- 6.1" x 6.1" x 3.58" inches, requires a 5-inch by 5-inch hole in the wall..
Check Stock

Flex-a-lite 180 Black Magic X-treme 15" Reversible Electric Fan

  • Overall dimensions of 21-1/2 inch x 17-1/2 inch x 4-3/16 inch.
  • No through the core mounting with the rigid bracket mounting system.
  • Comes with an adjustable temp sensor and A/C relay.
Check Stock