Reviews 2 0 Pci Combo Card

Cablecc USB 3.0 to SATA 22pin 2.5 Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD Adapter Converter

  • USB 3.0 to SATA 22pin 2.5" Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF and mSATA SSD Adapter Converter.
  • The item included one cable and one PCBA..
  • Build in Mini PCI-e 52pin Female connector.
  • Build in M.2 (NGFF) B key Female connector.
  • Insert both M.2 and mSATA SSD on the PCBA,M.2 SSD is the first priority.mSATA won't work. Support SATA Reversion 3.2.
  • PCI Express M.2 Spec.Revision 0.7, Version 1.0 PCI Express Mini Card Electromechanical Spec.1.2 PWM synchronous buck converter Power IC 3A maximum output current Short circuit protection In-rush current suppression Thermal shutdown protection ESD HBM (Human Body Mode)/2KV Note: The adapter only work for B-key or B/M-key socket, cannot work for M-key socket..
Check Stock

DTECH 2 Port PCI-E Serial Card RS232 PCI Express Adapter COM Port Expansion for Desktop Computer PC Windows 10 8 7 XP Vista Linux Mac with 16C550 UART

  • 2-port PCI express serial card turns a PCI-E expansion slot into 2 RS-232 DB9 serial port for your computer to connect multiple legacy serial devices.
  • Dual serial port card supports IRQ sharing and operates flawlessly with Windows 10, 8, 7, Vista, XP, 2000, ME, 98, Mac OS, Linux, etc.
  • PCI-E 1.0 a specification, Standard 16C550 UART signal.
  • PCI express combo card bracket with two RS232 serial interface uses WCH382 chip, high speed data communication transfer rate up to 250 Kbps.
  • Standard-height PCIe card bracket design allows the PCI to serial card to be installed in virtually any desktop computer case (full profile computer chassis).
  • An ideal serial expansion PCIe card adapter for fax modem, GSM modem, printer, barcode reader, cellular phone, PDA, POS machine, GPS, ISDN terminal adapter, satellite receiver, digital camera, hard drive, radio system, etc (If need driver installation guide , pls contact us directly via the order page.).
Check Stock

StarTech.com 2S1P PCI Serial Parallel Combo Card with 16550 UART - IEEE 1284 Card - Serial Parallel PCI - PCI Serial Adapter (PCI2S1P)

  • Add a parallel port and two RS-232 serial ports to your PC through a PCI expansion slot.
  • 2S1P PCI Serial Parallel Combo Card with 16550 UART.
  • PCI RS232 Serial Card plus Parallel Port.
  • 2x Serial and 1x Parallel Adapter Card / PCI Serial/Parallel Card Adapter / Serial RS232 Adapter Card with Parallel Port.
  • All three ports share only one IRQ which minimizes the system resources required to operate the card.
Check Stock

5 Slot M.2 B-Key SATA Base SSD PCI-e 3.0 x2 Bandwidth Expansion Card Require x16 Slot SI-PEX40142

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

StarTech.com PCI Serial Parallel Combo Card with Dual Serial RS232 Ports (DB9) & 1x Parallel LPT Port (DB25) - PCI Combo Adapter Card - PCI Expansion Card Controller - PCI to Printer Card (PCI2S1P2)

  • PCI CARD WITH SERIAL & PARALLEL PORTS: Using one PCI bus, add a DB25 parallel & two DB9 RS232 ports to your computer.
  • Serial Parallel PCI Card installs in 2x full profile or 3x low profile expansion slots.
  • TECH SPECS: Parallel Speeds up to 1.5Mbps | Supports SPP/Byte/ECP/EPP modes | Compatible with IEEE 1284 | Asix MCS9865 chip | RS-232 speeds up to 115.2 Kbps | 16C550 UART | 256 byte FIFO buffer | 5-9 bit character | Even, Odd, No, Space or Mark Parity.
  • VERSATILE APPLICATIONS: PCI expansion combo card adds LPT Printer & two COM serial ports working with printers, scanners, plotters, point of sale terminals, PLCs, control/automation in factories, scientific sensors, medical equipment, oscilloscope.
  • STANDARD PROFILE & LOW PROFILE BRACKETs: PCI multiport Parallel LPT & dual serial COM adapter card installs using 2x standard bracket (pre-installed) or 3x low profile brackets (incl).
  • Supports Windows 7 and up, Linux 2.6.x to 5.x.
Check Stock

StarTech.com PCIe Card with Serial and Parallel Port - PCI Express Combo Adapter Card with 1x DB25 Parallel Port & 1x RS232 Serial Port - Expansion/Controller Card - PCIe Printer Card (PEX1S1P950)

  • PCIe CARD WITH SERIAL & PARALLEL PORT: Using a x1 PCIe 2.0 slot, add a DB25 parallel & a DB9 RS232 port to your computer.
  • Card installs in full/standard profile PCIe slot.
  • Latest version of our popular PEX1S1P952.
  • TECH SPECS: Parallel Speeds up to 2.5Mbps | Supports SPP/Byte/ECP modes | Compatible with IEEE 1284 | Asix AX99100 chip | RS232 speeds up to 921.6Kbps | 16C950 UART | 256 byte FIFO buffer.
  • VERSATILE APPLICATIONS: PCIe expansion combo card adds LPT Printer & COM serial ports working with printers, scanners, plotters, point of sale terminals, PLCs, control/automation in factories, scientific sensors, medical equipment, oscilloscope.
  • WIDE COMPATABILITY: PCI Express RS232 serial/parallel adapter card is compliant with PCI-E Base Spec. Rev. 2 & PCI Power Mgmt 1.2.
  • Windows (7 and up) Windows Server (2003 and up) and Linux (2.6.X and up).
Check Stock

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

ELUTENG PCIE 1 to 4 Ports PCI Express 16X Slots Riser Card USB 3.0 PCI-E Adapter Board Multiplier Port GPU Extender Miner Riser Card for BTC Bitcoin Miner Mining

  • 【PCI-E 1 to 4 Riser Card】The bus interface is PCI-E X1, and compatible with X4, X8, X16 graphics interface, 1 interface can be expanded to 4 USB3.0 ports, which effectively solves the problem that the lack of PCIe interface on the motherboard. NOTE: The adapter card cannot be connected to USB devices, since the 4 USB ports transfer PCI-E signals, not USB signals..
  • 【Ultra-Large Aluminum Heatsink】The ultra-large imported aluminum alloy heatsink can effectively dissipate excess heat, so that the adapter card is always at a normal temperature, and the operation is more stable..
  • 【Plug-in Design】The PCI-E riser card adopts a plug-in design, which is directly connected to the motherboard interface for power supply. It can be fixed on the chassis without an extension cable, reducing the number of adapters and patch cords, effectively reducing interface interference and line loss, and ensuring data reliability and stability, improve work efficiency..
  • 【Strong Stability】The main control board adopts the PCI-E interface for direct power supply, without an external power cord, so that the main control board is not interfered by the outside world. 4 USB 3.0 ports can work at the same time, backward compatible with USB 2.0 and USB 1.0, the stability is....
Check Stock

Inateck 2 Port PCIe USB 3.0 Card with Internal USB 3.0 20-Pin Connector - Expand Another Two USB 3.0 Ports, Compatible Mac Pro, No Additional Power Connection Needed

  • No additional power supply for normal recognition and operation needed anymore, One Step Update your Windows Computer to USB3.0 Easily with PCI Express to USB3.0 Controller Adapter Card.
  • 1 USB 3.0 20-pin Connector ( expand another two USB 3.0 ports ).
  • Super Speed USB 3.0 supports transfer rates of up to 5 Gbps - The actual transmission speed is limited by the setting of the device connected..
  • Compatible with Windows XP/ Vista/ 7/ 8/ 10. Windows 10 and Mac 10.8.2 and more latest systems are built with a driver inherently. Windows systems earlier than Windows 10 and Mac OS earlier than Mac 10.8.2 require installing a driver in CD.
  • With quick and easy installation, this USB 3.0 PCI express I/O Card.
  • Windows XP and Vista Users Please Note: Due to OS limitations, the real transfer speed after installation of the respective drivers will be located between the level of USB 2.0 and 3.0.
  • Package: 1x USB3.0 PCI-E expansion card,1x driver CD, 1x low-profile PCI slot bracket, 1x mounting screw, 1x user manual.
Check Stock

ASRock ATX DDR3 1333 LGA 1150 Motherboards FATAL1TY Z97 Killer

  • Supports the 5th/ New 4th/ 4th Generation Intel Core i7/i5/i3/ Pentium/ Celeron Processors.
  • Memory: 4x DDR3-3000+(OC)/ 2933(OC)/ 2800(OC)/ 2400(OC)/ 2133(OC)/ 1866(OC)/ 1600/ 1333/ 1066 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 32GB.
  • Slots: 1x PCI-Express 3.0 x16 Slot, 1x PCI-Express 2.0 x16 Slot (runs at x4), 2x PCI-Express 2.0 x1 Slots, 2x PCI Slots.
  • SATA: 6x SATA3 Ports, Support RAID 0, 1, 5, 10.
  • Ports: 6x USB 3.0 Ports (4 rear, 2 via headers), 6x USB 2.0 Ports (3 rear, 2 via headers, 1 Fatal1ty Mouse Port), 1x PS/2 Mouse/Keyboard Combo Port, 1x VGA Port, 1x DVI-D Port, 1x HDMI Port, 1x Optical S/PDIF Out, 1x RJ45 LAN Port, Audio I/O Jacks.
Check Stock

StarTech.com 4 Port PCI SuperSpeed USB 3.0 Adapter Card with SATA/SP4 Power - Quad Port PCI USB 3 Controller Card (PCIUSB3S4),Red

  • ADD 4x SUPERSPEED USB 3.0 PORTS: This PCI/PCI-X Universal (3.3V & 5V, 32-bit) card adds four USB 3.0 ports to your computer or server through a PCI slot.
  • Supports USB 3.0/3.1 Gen 1/USB 3.2 Gen 1x1.
  • TRANSFER SPEEDS: Achieve speeds up to the maximum of your PCI bus (1.3Gbps) with UASP making the USB PCI card ideal for older computers with only PCI slots available like Dell OptiPlex 7010/HP Compaq dc7800.
  • Backward compatible with USB 2.0/1.1/1.0.
  • OPTIONAL POWER: USB PCI expansion card features SATA & SP4 power ports to supply supplemental power to the USB ports (when motherboard power is insufficient).
  • Power can be connected to SATA or SP4 port to provide up to 5V 0.9A/4.5W per USB Type-A port.
  • STANDARD PROFILE & LOW PROFILE BRACKET: PCI USB card comes with a full-profile (standard) bracket pre-installed with a low-profile (half height) bracket included for versatile installation in both low-profile and full-profile computer systems.
Check Stock

Inateck PCI-E to USB 3.0 (5 Ports) PCI Express Card and 15-Pin Power Connector, Red (KT5001)

  • PCIe USB 3.0 Card: SuperSpeed USB 3. 0 supports transfer rates of up to 5Gbps - The actual transmission speed is limited by the setting of the device connected.
  • One Step Update your Computer to 5 ports USB3. 0 Easily with PCI Express to USB3. 0 Controller Adapter Card.
  • 1 USB 3. 0 20-pin Connector ( expand another two USB 3. 0 ports ).
  • Backwards compatible with USB 2. 0 and 1. 1 devices.
  • Operating System Compatibility: Windows XP/Vista/7/8/10,Mac OS 10. 8 or above..
  • With easy installation, this USB 3. 0 PCI express I/O Card offers a simple solution for your standard desktop PC.
  • Windows XP and Vista Users Please Note: Due to OS limitations, the real transfer speed after installation of the respective drivers will be located between the level of USB 2. 0 and 3. 0.
Check Stock

MZHOU PCI-E 1X to 16X Riser Card with M.2 to PCI-E X1 NGFF Slot NVME Adapter Card,for Bitcoin Crypto Mining Ethereum Mining（Black）

  • PCI-E 1X to 16X riser card---VER009S-PLUS version, a high-performance PCI Express riser card, which can extend the motherboard PCIE X1 slot to the PCIE X16 slot. Mainly designed for Ethereum/Bitcoin mining equipment or more GPU mining equipment..
  • The PCI-E card can be inserted into any PCI-E slot: x1, x4, x8 or x16. The USB 3.0 transfer cable can flexibly place your PCI-E devices.Plug and play..
  • M.2 NGFF to PCI-E X16 adapter card, support the M.2 NGFF slot of PCI-E channel,using this adapter card can convert the M. 2 NGFF interface into a common PCI-E X16 interface..
  • M.2 NGFF adapter card have 4 fixed holes on the board, 30mm,12mm, 19mm，21mm.Can be broken off positioning according to the length of the card slot in your machine..
  • Support System：Compatible with all WINDOWS systems, LINUX, MAC. Package contents:PCI-E 16X Main Card*1/PCI-E 1X Plug-in Card*1/24in USB 3.0 Cable*1/6PIN to 15PIN Power Cable*1/M.2 to PCI-E riser card*1/Screw*1/Screwdriver*1.
Check Stock