Reviews 2 0 260k Tft Screen

Taking Photos under and around Water

  • CAMERA POWERFUL IMAGE SENSOR - 16MP IMX083 CMOS 1/2.3" image sensor for sharp colorful pictures and 4K Ultra HD video @30fps and 1080p HD video @120 fps, 260K hi-res 2.4" TFT color LCD.
  • BRIGHT LED LIGHT - 2500 lumens LED light using the latest COB LED array technology, 90 Color Rendering Index (CRI) that mimics natural daylight, 120 deg. wide beam angle evenly illuminates the subject with no hot spots, 60-minute run time at full power.
  • HIGH-RESOLUTION IMAGES – The underwater camera shoots 10 high resolution 16MP pictures in 1 second, captures 8mp still images while recording 4K video.
  • hi-res, uncompressed .DNG image files for virtually unlimited photo editing options.
  • SOLID CONSTRUCTION - The camera is leak-proof with no O-rings, compact design for easy handling, fully rubber-armored shock resistant body.
  • corrosion-proof anodized aluminum light head with fiber-reinforced polycarbonate body.
  • FEATURES – Camera: ultra-fast shutter response, 100° ultra-wide angle lens, electronic stabilization, WiFi, 64GB internal memory.
  • Light Head – 3 brightness levels, hidden emerge....
Check Stock

BIGTREETECH TFT35 V3.0 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR V1.3 SKR PRO Board for 3D Printer Part

  • ❤【32 Bit High Performance Microprocessor】TFT35 V3.0 touch screen uses 32 bit ARM level Cortex-M3 series STM32F207VCT6,120MHz frequency....
  • ❤【Two Working Modes】TFT35 V3.0 Touch screen support UART serial port screen mode(touch screen mode) and 12864 screen mode,serial screen mode....
  • ❤【12864LCD Mode】The 12864LCD mode includes EXP1, EXP2, EXP3, where EXP1 and EXP2 are general motherboards LCD screen interface, while EXP3 is....
  • ❤【More Extension Ports is Reserved】 TFT35 V3.0 display reserve the extension port of filament break detection ,automatic shutdown after....
  • ❤【Firmware Update】 It is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must....
Check Stock

BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3 with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

Haosegd 3D Printer 32-bit V4.2.7 Silent Motherboard 24 V Input Mainboard for 3D Printer Creality Ender-3/3 pro Ender V2/Ender 5 Aluminum Low Consumption 4.01 x 2.81 in 12V Output

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

BIGTREETECH Smart Filament Sensor Filament Break Detection Module 3D Printer Parts for 1.75mm Filament SKR V1.3 Mini E3 GEN V1.4

  • 1) It can detect nozzle plugs, consumables are entangled, and the consumables caused by extruder failure are abnormally extruded. Happening..
  • 2) It can detect that the consumables such as consumables are broken and the consumables are not used..
  • 3) Applies to the open source firmware marlin 2.0.x. Marlin2.0 uses powerful development tools, Visual Studio Code integrated development environment: support for online debugging, more helpful for product development and performance optimization, C language development, low development threshold..
  • 4) Support the motherboard with the break detection interface..
  • 5) Support screen 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode)..
Check Stock

SeaLife Micro 3.0 Pro 3000 Underwater Camera & Light Set for Photography and Video Easy Set-up Wireless Transfer Includes Sea Dragon Travel case

  • CAMERA POWERFUL IMAGE SENSOR - 16MP IMX083 CMOS 1/2.3" image sensor for sharp colorful pictures and 4K Ultra HD video @30fps and 1080p HD video @120 fps, 260K hi-res 2.4" TFT color LCD.
  • BRIGHT LED LIGHT - 3000 lumens featuring BridgeLux Gen 7 Vero LED array, 80 Color Rendering Index (CRI) that mimics natural daylight, 120 deg. wide beam angle evenly illuminates the subject with no hot spots, 60-minute run time at full power.
  • HIGH-RESOLUTION IMAGES – The underwater camera shoots 10 high resolution 16MP pictures in 1 second, captures 8mp still images while recording 4K video.
  • hi-res, uncompressed .DNG image files for virtually unlimited photo editing options.
  • SOLID CONSTRUCTION - The camera is leak-proof with no O-rings, compact design for easy handling, fully rubber-armored shock resistant body.
  • anodized aluminum light head with fiber-reinforced polycarbonate body.
  • FEATURES – Camera: ultra-fast shutter response, 100° ultra-wide angle lens, electronic stabilization, WiFi, 64GB internal memory.
  • Light Head – 4 light modes, white light: 3000 lumens, red light: 180 lumens.
Check Stock

SeaLife Micro 3.0 64GB 16mp 4K Underwater Camera for Underwater Photography and Video Easy Set-up Wireless Transfer Includes case Wrist Strap

  • POWERFUL IMAGE SENSOR - 16MP IMX083 CMOS 1/2.3" image sensor for sharp colorful pictures and 4K Ultra HD video @30fps and 1080p HD video @120 fps, 260K hi-res 2.4" TFT color LCD.
  • INTUITIVE SETUP - Easy setup with five Land & Sea scene modes, three built-in digital UW color correction filters (WB modes) and manual white balance to customize UW color correction to your specific depth and water conditions.
  • HIGH-RESOLUTION IMAGES – The underwater camera shoots 10 high resolution 16MP pictures in 1 second, captures 8mp still images while recording 4K video.
  • hi-res, uncompressed .DNG image files for virtually unlimited photo editing options.
  • SOLID CONSTRUCTION - The camera is leak-proof with no O-rings, so there is never a worry about flooding the camera.
  • compact design for easy handling and lightweight travel, fully rubber-armored shock resistant body.
  • individually depth tested to 200' (60 m).
  • FEATURES – Ultra-fast shutter response, 100° ultra-wide angle lens, electronic stabilization, "Piano Key" button controls for easy operation, WiFi, 64GB internal memory, time lapse shooting, upside-down shooting mode, works with SeaLife Micro 3+ app.
Check Stock

SeaLife Micro 3.0 Pro Duo 5000 Set Underwater Camera & Dual Light Set for Photography and Video Easy Set-up Wireless Transfer Includes Travel case

  • CAMERA POWERFUL IMAGE SENSOR - 16MP IMX083 CMOS 1/2.3" image sensor for sharp colorful pictures and 4K Ultra HD video @30fps and 1080p HD video @120 fps, 260K hi-res 2.4" TFT color LCD.
  • BRIGHT LED LIGHT - 2500 lumens LED light using the latest COB LED array technology, 90 Color Rendering Index (CRI) that mimics natural daylight, 120 deg. wide beam angle evenly illuminates the subject with no hot spots, 60-minute run time at full power.
  • HIGH-RESOLUTION IMAGES – The underwater camera shoots 10 high resolution 16MP pictures in 1 second, captures 8mp still images while recording 4K video.
  • hi-res, uncompressed .DNG image files for virtually unlimited photo editing options.
  • SOLID CONSTRUCTION - The camera is leak-proof with no O-rings, compact design for easy handling, fully rubber-armored shock resistant body.
  • corrosion-proof anodized aluminum light head with fiber-reinforced polycarbonate body.
  • FEATURES – Camera: ultra-fast shutter response, 100° ultra-wide angle lens, electronic stabilization, WiFi, 64GB internal memory.
  • Light Head – 3 brightness levels, hidden emergency signal mode.
  • depth tested to 200 ft (60m), waterproof battery compartment.
Check Stock

Freeda Biotin 10000 mcg - Kosher Biotin 10000mcg Hair Skin and Nails Vitamins for Hair Growth - Biotin Pills Hair Growth Vitamins B7 - Superior Biotin Supplement Hair Vitamins for Women & Men (100 Ct)

  • TRIPLE-LAYER PROTECTION - The best protection for your 4. 7 inch iPhone 6S. Period! Constructed out of a "no stretch" soft TPU case + extra hard polycarbonate back plate + crystal clear HD TFT screen protector. Your iPhone will be protected from all angles..
  • 4 SILICONE SHOCK ABSORBERS - Say goodbye to the good old air cushion! Our unique silicone shock absorbing technology integrated into each corner of the case s maximum shock protection..
  • FRONT AND REAR PROTECTION - Don't expect any less! The beveled edge on the front of the iPhone 6 case provides a 0. 9 mm lip when laying on a table. The 4 raised edges with a maximum height of 0. 8 mm protect the back of the case.
  • EASY ACCESS PORTS - Ensures ultimate connectivity. Extra large openings allow easy access to all ports, buttons, and camera. Compatible with most battery chargers and earphone jacks..
  • INCLUDED AT NO EXTRA COST! THE ORIGINAL HD TFT SCREEN GUARD - This high quality screen protector ($10 value) provides full protection for your iPhone screen and is included at no extra cost! Fabricated from premium quality material made in Japan, the high-transparency HD TFT screen protector provides ultimate scratch and impact resistance..
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

AKASO EK7000 Pro 4K Action Camera with Touch Screen EIS Adjustable View Angle Web Underwater Camera 40m Waterproof Camera Remote Control Sports Camera with Helmet Accessories Kit

  • POWERFUL IMAGE SENSOR - 16MP IMX083 CMOS 1/2.3" image sensor for sharp colorful pictures and 4K Ultra HD video @30fps and 1080p HD video @120 fps, 260K hi-res 2.4" TFT color LCD.
  • INTUITIVE SETUP - Easy setup with five Land & Sea scene modes, three built-in digital UW color correction filters (WB modes) and manual white balance to customize UW color correction to your specific depth and water conditions.
  • HIGH-RESOLUTION IMAGES – The underwater camera shoots 10 high resolution 16MP pictures in 1 second, captures 8mp still images while recording 4K video.
  • hi-res, uncompressed .DNG image files for virtually unlimited photo editing options.
  • SOLID CONSTRUCTION - The camera is leak-proof with no O-rings, so there is never a worry about flooding the camera.
  • compact design for easy handling and lightweight travel, fully rubber-armored shock resistant body.
  • individually depth tested to 200' (60 m).
  • FEATURES – Ultra-fast shutter response, 100° ultra-wide angle lens, electronic stabilization, "Piano Key" button controls for easy operation, WiFi, 64GB internal memory, time lapse shooting, upside-down shooting mode, works with SeaLife Micro 3+ app.
Check Stock

Hantek1832C Handeld 40kHz LCR Meter with Carry Case, 0.6Vrms

  • 100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz test frequency, 0.6 Vrms test level, 0.30% accuracy.
  • Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR.
  • 4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead.
  • Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R).
  • reset function: open/short circuit calibration.
  • 2.8" TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs.
Check Stock