Reviews 1mm Barrel Jack

Pack of 2 6V Power Box 4xAA Battery Holder Case with DC Connector Compatible with Barrel Jack Connector for Arduino

  • The connector is paired with the barrel jack on Arduino to supply power to your device, power supply to LED lamp power supply, etc., and you can also go to DIY for more play.
  • The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector.
  • The connector compatible with Arduino (among a number of other products) allowing you to easily make your project battery powered.
  • Package includes: 2 x 4xAA Battery Holder Case.
Check Stock

ZRM&E 6V Power Box 4xAA Battery Holder Case with DC 5.5x2.1 Connector Mate with Barrel Jack Connector on Arduino

  • Package includes: 1 x 4xAA Battery Holder Case.
  • The connector is paired with the barrel jack on Arduino to supply power to your device, power supply to LED lamp power supply, etc., and you can also go to DIY for more play.
  • 5 inch cable termination standard 5.5x2.1mm center positive barrel jack connector.
Check Stock

BESPORTBLE Air Blower, Mini Fan Blower for Dinosaur Costume or Doll Mascot Head or Other Inflatable Costume, 6V Powered by 4xAA Dry Battery (Without Battery)

  • Package includes: 1 x 4xAA Battery Holder Case.
  • The connector is paired with the barrel jack on Arduino to supply power to your device, power supply to LED lamp power supply, etc., and you can also go to DIY for more play.
  • 5 inch cable termination standard 5.5x2.1mm center positive barrel jack connector.
Check Stock

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

  • The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega R3，RoHS Compliant.
  • The chip is Atmega+2560-16au and 16u2, same with the official version..
  • Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes..
  • Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
  • It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check Stock

ESCO 10498K 10498-K Jack Stand Kit, 3 Ton Per Stand, Contains Flat Top Rubber Cushion Post and AXLE Top Post

  • DC Barrel Jack 5.5x2.1mm 12V Panel Mount for Wall Supplies(pack of 10).
Check Stock

4xAA Battery Pack Holder Case Box to DC Barrel Jack Connector Compatible with Arduino(Pack of 2)

  • The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector.
  • The connector compatible with Arduino (among a number of other products) allowing you to easily make your project battery powered.
Check Stock

Onite 2pcs DC Male to Male 5.5x2.1mm Power Adapter Cable, 20AWG 3ft Cord for LED Strip, Surveillance Camera, CCTV Security Camera, LED Display, IP Camera, DVR, Router, Invoice Printer

  • DC plug size:5.5x2.1mm,the outer diameter is 5.5mm, and the inner diameter is 2.1mm.
  • Cable length:3ft(1 Meter)DC Power Extension Cable For LED light strip,LED signage,DVR Standalone,Audio,camera,car,boat,monitors,lighting,printers,sensors,external hard drives,audio mixing and recording equipment and etc..
  • This cable/cord only includes 2 wire inside, it doesn't support data transmission..
  • Package: 2 Pieces of DC to DC Male 5.5x2.1mm Barrel Jack Center PIN Positive Power Cable Charger Cord.
  • If you have any questions,please contact us immediately!We will try our best to solve your problems..
Check Stock

Onite USB to DC 5.5x2.1mm Barrel Jack Center Pin Positive Power Cable Charger Cord for LED Strip,6.6ft 2-Pack

  • 1. Please note the DC tip size is 5.5*2.1mm,the inner diameter is 2.1mm,and the outer diameter is 5.5mm.Please measure your device interface size is....
  • 2. Universal compatibility: chargers below 24V 5A, interface standards usb2.0, usb3.0. Universal compatible equipment: 3C, digital, Led and peripheral....
  • 3. Onite USB data cables are suitable for indoor and outdoor electronic products and equipment such as thermometers, cameras, routers, phones, mobile....
  • 4. This cable/cord only includes 2 wire inside, it doesn't support data transmission..
  • 5. Package: 2 Pieces of USB to DC 5.5x2.1mm Barrel Jack Center PIN Positive Power Cable Charger Cord.If you have any problems,please contact us....
Check Stock

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

weideer 2Pcs DC12V-24V LED Strip Lights Dimmer Switch 6A PWM Rotary Dimmer Controller Inline Dimmer Switch for LED String Lights Outdoor Christmas Lights Black K-018-BK

  • can realize stepless dimming, 0%-100% dimming, low brightness without flicker..
  • Simple Operation: The dimmer switch comes with a standard 5.5mmx2.1mm DC barrel jack male/female connector, plug it in and use it.
  • the knob operates the control, just turn the knob to adjust the temperature to suit you..
  • Product size: 61x 33x 32mm/2.5"x1.3“x1.2”.
  • Supply voltage: DC12V-24V；Supply voltage of this product is DC12-24V.
  • Product use: LED strips, LED strips, LED rope lights, 5050/ 3528/ 2835/ 5630 LED strips, aquarium lights, ambient lights..
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

KAISH Stereo Copper Guitar Bass 1/4\ Barrel Jack Cylinder Input Output Jacks with 4 Pins Stereo or Mono Jack Black Nickel

  • Total length including poles: about 48.5mm.
  • This is a very good quality Barrel Jack with 4 pins,but not those inferior jacks made in cheap factories.
  • 4 Pins Stereo Jack (The shorter two pins are main conductor pins).
  • The 4 pins are hardened by special technology, please DO NOT break them with fingers.
  • Of course, you can use this item as Mono Jack as well.
Check Stock

SparkFun RedBoard Qwiic ATMega328P compatible with Arduino board w/ Qwiic Connector and CH340C Serial-USB Converter IC Breadboardable R3 footprint microcontroller Improved reset button

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader. Rev3 shield compatible..
  • Program with a USB Micro-B cable using the Arduino IDE platform: Plug in the board, select “Arduino UNO” and you’re ready to upload code.
  • Hardware peripherals you know and love: 20 Digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts.
  • Broken out the SDA, SCL and IOREF pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC.
  • The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong..
Check Stock