Reviews 1inverted Flare Thread Size

EVIL ENERGY 6AN to 6AN Male Flare Coupler Union Straight Fuel Hose Adapter Fitting Black 2 PCS

  • Package Included: 2 pcs x 6AN to 6AN Male Flare Coupling Union Adapter.
  • Thread size of 6AN male coupler is 9/18-18 JIC, can use to splice or extend a line, works with female thread fitting..
  • Black 6061-T6 aluminum 6AN flare union work temperature: -65 to +252 degree F, max pressure: 1000 psi, ultimate torque: 25N..
  • Male to male flares coupler usually used in fuel system,such as fuel hose extend, line connect to fuel filter, fuel pump, cooler system..
  • Mala union fittings can works with EVIL ENERGY Swivel fitting, push lock fitting and female AN fittings.Please match the correct size..
Check Stock

Auto Supplies Direct 3-Way Female Brake Line Tee Union Fittings For 3/16\ Tube (3/8\ - 24 Thread, Inverted Flare) (Pack of 3)

  • Auto Supplies Direct 3/16" 3-Way Female Brake Line Tee Fittings Pack of (3) for Cars and Trucks.
  • For Automotive Brake Line Systems, Works With Your Preferred 3/16" Brake Line Of Your Choice.
  • Most Common 3/16" SAE Inverted Flare (3/8" - 24 Thread, Inverted Flare) / Double Flare Size.
  • High Pressure Resistant, Constructed From Safe and Professional Quality Brass, Lead Free.
  • Compatible With 3/16" Steel, Copper, Nickel Poly Armour, and Cupronickel Tubing.
Check Stock

Stanbroil Propane Brass 4 Port Tee kit with 5ft and 12ft Hoses Allows for Connection Between Auxiliary Propane Cylinder

  • Premium Quality: The kit is made of high-quality rubber and brass, more durable, gives you new flexibility..
  • Propane Brass Tee: 1/2” NPT Female Thread x Excess Flow Soft Nose POL x 1"-20 Male Throwaway Cylinder Thread x 1/4” female inverted flare..
  • 5' auxiliary tank hose: Soft-nose male POL x 1/4" inverted male flare..
  • 12' additional appliance hose: 1" male x 1" female swivel -20 throwaway cylinder thread..
  • Widely Used: Easy to install, Very safe and convenient. Great for camping, having an outdoor cook, grills, heater, A must have if you are a RVer..
Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

  • 【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
  • 【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
  • 【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
  • 【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....
Check Stock

58m Soft Rubber Lens Hood for Canon Rebel T5 T6 T6i T7i T8i EOS 80D EOS 90D EOS 77D SL3 Cameras with Canon EF-S 18-55mm is STM Lens

  • 58m Soft Rubber Lens Hood for Canon Rebel T5, T6, T6i, T7i, T8i, EOS 80D, EOS 90D, EOS 77D, SL3 Cameras with Canon EF-S 18-55mm f/3.5-5.6 IS II, IS STM Lens.
  • Prevents lens flare caused by extraneous light and protects against unexpected bumps or shock.
  • Maintains Exposure Levels - Reduces flare.
  • Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Ø" (diameter) symbol..
Check Stock

Frienda 12 Pieces 3/8 Inch-24 Threads Brake Line Fittings Assortment for 3/16 Inch Tube (4 Unions, 8 Nuts)

  • Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines.
  • Please confirm the size of the details according to the picture before purchasing.
  • Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance.
  • You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings.
  • Inverted flare union: these unions are a nice option to join 2 (3/16 inch) brake lines together.
  • Brake line fitting connect: the nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24.
Check Stock

gohantee Propane Orifice Connector Brass Tube Fitting 3/8' Flare x 1/8' Mnpt for Freestanding Casting Cooking Stove Grill Turkey Pot Cooker 2PCS

  • [COMPATIBILITY]--These are propane nozzle for turkey pot cooker, cast iron cooker stove with 3/8" male thread x 1/8" NPT thread and jets. The orifice compatible with Gasone cooker or other similar brand..
  • [SIZES]--The thread of propane orifice: 3/8" flare MNPT x 1/8" MNPT..
  • [PREMIUM QUALITY]--This gas orifice jets connector brass hose fitting is made of high quality brass. Brass for corrosion resistance and durability , high temperature ductility and low magnetic permeability..
  • [NOTE]--The propane stove orifice is not fit for potable water appliances..
  • [SERVICE WARRANTY]--If you have any questions with 3/8 flare to 1/8 orifice, please contact with us and we will reply within 24 hours..
Check Stock

67mm Digital Tulip Flower Lens Hood and 67mm UV Filter for Nikon CoolPix P900 P950 Digital Camera

  • ULTIMATE LENS HOOD SET YOU NEED, it includes: 67mm reversible tulip flower lens hood, 67mm 3 stages collapsible rubber lens hood, 67mm center pinch....
  • REVERSIBLE TULIP FLOWER LENS HOOD: Unique design for quickly detaching and mounting. Normal mode and reverse mode for using. The only flower lens hood....
  • COLLAPSIBLE RUBBER LENS HOOD: 3-in-1 design for use with wide-angle, standard, telephoto zoom/non-zoom lenses. Prevents lens flare caused by....
  • PAIR WITH FILTER: Our lens hoods provide with Filter Thread, allowing you to pair this hood with filter and lens cap..
  • NOTICE: This set is compatible with all 67mm lenses, please verify your camera's lens thread size before ordering. Your camera's lens thread size will....
Check Stock

Upgraded 36 Feet 1/2 Inch ID Natural Gas Hose with 3/8 Inch Female Flare by 1/2 Inch Male Flare Adapter, Quick Connect Disconnect, Anti-Cracking for Natural Gas,Propane Equipment

  • ... Flare by 1/2" Male Flare Brass Adapter. Flexible conversion, more widely adapted to your need. Please check the size of the hose and the size of the parts before purchasing..
  • [High quality material] This Upgraded 36-foot 1/2-inch inner diameter natural gas hose, the tube body is made of high-quality rubber, and the thread is made of durable solid brass, which is anti-chipping, anti-rust, and very durable. And we also include a solid brass 3/8" Female Flare by 1/2" Male Flare Brass Adapter, and a sealing tape to give you a safe and stable experience..
  • [Enough airflow] Our natural gas grill hose can provide up to 100,000BTU/hour of heat, and provide sufficient airflow for grills of 30 inches and larger sizes to meet your more needs..
  • [Quality certification] Our natural gas hose has passed CSA certification, you can use it with confidence..
  • [Quality Service]Due to rules, the seller cannot respond to the buyer’s comments. In addition, if the name of your review is different from the name of your order, it will be difficult for me to find your order, and I will not be able to contact you and serve you. So if you have any questions, please feel free to send me an email, I will give you the best answer! I will be responsible for our products to the end..
Check Stock

MENSI High Pressure BTU Propane Cast Iron Round Burner Head Propane Commercial Burner Head with Orifice Brass Fitting

  • Great Material and High temperature powder resistance surface treatment cast iron material Burner body.
  • Application: Fits most propane grill, stove, smoker, burner, heater, fireplace, fire pit, cooker, turkey fryers, torches and variety of high pressure....
  • Inlet brass fitting with 3/8" male flare thread to fit with standard regulator hose adapter.
  • Built in Air Shutter: It also has air shutter for better ventilation to the propane can thorough combustion and prevent your griddle, pot and all....
  • The orifice is for propane gas with 3/8" Male Flare x 1/8" Mnpt thread.
Check Stock

EVIL ENERGY 6AN Male Flare to 3/8' NPT Pipe Fitting Adapter Aluminum Straight Black

  • Size: AN6 to 3/8 NPT,the thread size of 6AN is 9/16-18UNF..
  • Material: Made of aluminum alloy 6061-T6, anodized black surface..
  • Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
  • 3/8 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 6AN Flare to 6AN ORB Male Fuel Rail Adapter Fitting Black 2Pcs

  • size:the thread size of 6AN is 9/16-18 UNF,the thread size of 6AN ORB is 9/16-18 UNF.
  • Sealing：The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring..
  • Material: The 6AN to 6AN orb reducer is made of aluminum alloy 6061-T6 which is anodized black surface,and the O-ring is made of NBR rubber.(Temperature Range: -40F° to +212F°.Maximum working pressure: 4000PSI).
  • The orb fitting can be used with water, air, fuel, oil, fuild, E85, etc..
  • EVIL ENERGY provide the orb adapter 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 6AN Male Flare to 1/4\ NPT Pipe Fitting Adapter Aluminum Straight Black 2Pcs

  • Size: AN6 to 1/4 NPT,the thread size of 6AN is 9/16-18UNF..
  • Material: Made of aluminum alloy 6061-T6, anodized black surface..
  • Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
  • 1/4 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock