Reviews 1air Compressors

Amsoil Slip Lock Limited Slip Additive

• This is a high quality synthetic lubricant specifically designed to meet the rigorous demands of industrial compressors.
• Up to 8 Times the service life of mineral oils..
• This oil is a premium synthetic, ashless, non-detergent, air compressor oil.
• This is commonly used with reciprocating compressors, rotary vane compressors, pressure washer pumps, and vacuum pumps..

Klein Tools 56117 Premium Synthetic Wax Wire and Cable Pulling Lubricant, 1-Quart Squeeze Bottle

• increased load-bearing capacity, beyond 800-1000% higher than most conventional compressor oils.
• thick, high durability film strength to prevent metal to metal contact even in high operating temperatures conditions.
• offers both high temp continuous operation capabilities and arctic grade - 50 F.
• multi viscosity keeps fluid requirements at a minimum eliminating the need for lower or higher viscosity oils due to temperature range.
• Works exceptionally well on rotary, vane, screw, and reciprocal air compressors in severe service with high compression temperatures and long operating hours.
• High purity base oils with top tier detergent pack guaranteed sludge free operation and exceptionally clean equipment.
• exceptional bearing protection eliminates bearing vibrations and polish.
• dramatically prolongs component life far beyond ordinary lubricants.
• Not recommended for breathing air pumping compressors, oxygen compressors, or LPG compressors fitted on natural gas pipelines..

Flexzilla Pro Piston Air Compressor with Silencer, 1-Phase, Stationary, 10 HP, 80 Gallon, 2-Stage, Vertical, ZillaGreen - FXS10V080V1

• All Flexzilla air compressors feature low RPM pumps and motors that reduce high frequency noise levels while increasing CFM output..
• Flexzilla stationary air compressors includes the silencer, a patented noise cancellation system that reduces low frequency noise levels..
• Flexzilla air compressors are among the quietest compressors on the market. Emitting operating noise no louder than a normal conversation..
• Cool Flow Technology – Industry exclusive. We raise the pump to allow air movement, adding an extra cooling feature and extending life.
• Exclusive 1-Phase up to 10 HP! – We are the only manufacturer with the expertise to build a 1-Phase compressor up to 10 HP. This industry exclusive delivers up to 39 CFM!.

ECCPP A/C Compressor Clutch CO 11200C 2008-2013 for N-issan Rouge 2.5L

• AIR CONDITIONING COMPRESSORS PARAMETER - OE CO 11200C, 92610JM01C, 141004C, 141004NC, 141004NEW, 10347900, 98490.
• VEHICLE COMPATIBLE - A/C Clutch fits for 2008-2013 for ​N-issan Rouge 2.5L.
• MAIN FUNCTION - Compressors are the heart of the air conditioning system, responsible for transporting A/C refrigerant throughout the automobile's A/C system.
• PREMIUM FEATURES - High Quality Replacement Part, 100% Brand New and tested prior to leaving the factory, air conditioning compressors assembly is backed by industry leading warranty.
• SERVICE WARRANTY - 1 year warranty, support replace, return and refund service.

Air Compressor Intake Paper Filter Elements, 4 PCS Replacement Compressor Air Filter Element (Type 1)

• ➦[Durable] -Air compressor intake filter is made of a heavy duty paper material and can be used in noisy equipment, such as blowers, air compressors, boilers, exhaust port, generators, pumps and exhaust ports..
• ➦[100%Filtration Efficiency] – This air compressor filter element has a 100% filtration efficiency. This is for most common compressor (midsize to large compressors) air cleaner size and work the same as the original filter.
• ➦[4 Pack with Great Price] - A s a gift from us to your Thanksgiving Day and Christmas, the 4 pack of air compressor filter element will cost less than just one from your dealer..
• ➦[Ideal Accessories for Air Compressors] - Air compressor filter element is quite easy to install, able to reduce the compressor noise at work, fits craftsman, porter cable, and air compressor models..
• ➦ [Customer Service] - Described accurately and shipped promptly and our customer services will always be available whenever you need us..

Gast R5325A-2 Regenerative Blower, Three Phase; 133 cfm at 50 Hz, 160 cfm at 60 Hz

Regenerative Blower, 1.00 HP, 98 CFM

Sanden 508 Style AC Compressor Clutch, Serpentine Pulley, Natural Finish

• 8 Rib Serpentine Pulleys for Increased Grip and Performance.

Wagner Power Products 276124B HVLP Conversion Gun

• Paint spray gun for converting high-pressure compressors into HVLP fine-spray system.
• Works with compressors with at least 1-1/2 horsepower.
• Includes conversion gun (0276124) regulator valve, bleeder and non-bleeder connections, needle/nozzle fine-finish projector set, 1-quart cup.

Vixen Air Suspension Kit for Truck/Car Bag/Air Ride/Spring. On Board System- Dual 200psi Compressor, 5 Gallon Tank. For Boat Lift,Towing,Lowering,Load Leveling,Onboard Train Horn VXX1208GW/4852DC

• POWERFUL AIR SUSPENSION KIT - This premium kit is designed to address high air demands of trucks and cars. It includes a 5-gallon tank with 9 ports, two 200 PSI compressors, high flow electric air valves, a dual gauge panel with 4-way switch control, and basic hardware for installation..
• ONBOARD AIR SYSTEM WITH INCREASED CAPACITY & SPEED - The two compressors double the tank's air intake for a faster refill. The large tank volume with efficient refill allows your system to react quickly to changes. This is a perfect solution for vehicles with mid to large-size air bags, assuring a super-fast rise time and smooth operation..
• HIGH FLOW ELECTRIC AIR VALVES - The 8 included high flow valves increase the airflow to and from the air bags, which improves the response time of your suspension system for outstanding performance..
• EXTRA VOLUME FOR HIGHER AIR NEEDS - This kit is recommended for vehicles that need high suspension for heavy load leveling and have the space for two compressors and a 5-gal tank. It can also serve all your other air needs like airing up tires, train horns and additional air tools..

1/4 Drain Cock Ball Valve 2 Pieces Set replacement for Air Compressors

• 1/4" Drain Cock Ball Valve 2 Pieces Set replacement for Air Compressors Drain Cock Ball Valve for Air Compressors One Quarter turn to fully open....
• 1/4" NPT Male Pipe Threads Fits: DeWalt & Porter Cable Craftsman , DeVilbiss , Emglo , Dewalt , Jenny , Rol-Air , J-Air , C/H and Many others. Large....

Gorilla Carts GCT-10NF Replacement Tire, 10" (2-pack)

• 10 in. no flat replacement tire for lawn and garden Carts, hand trucks, air compressors, pressure washers, hose reel and more.
• Long lasting, solid polyurethane design with a 300 lbs. capacity.
• Offset wheel hub with a hub length of 2.17 in.
• Compatible with lawn and garden carts, hand trucks, air compressors, pressure washers with 10 in. Wheels.

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

• REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
• GM R4 and A6, HR-6, DA-6 and V A/C compressors.
• sander compressors SD 505, 507, 575, 708, and 709.
• Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
• Check vehicle owner’s manual for a list of compatible compressors.
• EASY TO USE: Keep all threads clean and well-oiled.
• Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
• Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
• Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
• BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
• Resists rust and corrosion with proper care and lubrication.
• 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
• EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....