Reviews 199crv Main Relay Locations

uxcell 2Pcs Coil Compressor Relay Start Relay for 1/3HP Refrigerator Black

  • Total Size(Approx) : 35x35x35mm/ 1.4" x 1.4" x 1.4"(L*W*H).
  • When the voltage is 220V and the compressor model is 1/ 3HP, select this start relay.
  • When the voltage is 110V, the refrigerator start relay is....
Check Stock

5v Relay Board Relay Module 1 Channel Opto-Isolated High or Low Level Trigger

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
  • 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
  • 【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
  • 【Wide Application】- These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
  • 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

Youngneer 5v Relay Board Raspberry Arduino Relay Module 1 Channel Opto-Isolated High or Low Level Trigger

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
  • 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
  • 【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
  • 【Wide Application】- These 5v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
  • 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..
Check Stock

LG EBR74164805 Genuine OEM Relay Control Board for LG Range/Stove/Ovens

  • This LG Relay Control Board is a genuine OEM (Original Equipment Manufacturer) part manufactured to exact specifications.
  • Replacement LG brand Range/Stove/Oven Relay Control Board operates relays to regulate the oven elements.
  • LG EBR74164805 Range/Stove/Oven Relay Control Board receives signals from the main oven control board.
  • High quality LG OEM EBR74164805 Range/Stove/Oven Relay Control Board is manufactured with premium materials for durability and exact fit, be sure to....
  • Life's Good when choosing Genuine LG OEM Factory parts for your LG appliances.
Check Stock

3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT ESP8266 Microcontrollers Development Board

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
  • 【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
  • 【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
  • 【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..
Check Stock

NR2-25 Electric Overload Relay Adjustable Motor Protection Thermal 50-60hz(17-25A)

  • ◇ ANTI-INTERFERENCE---Made of the high quality miniature optocoupler, the relay module is of anti-interference ability, stable performance.
  • ◇ STABLE AND RELIABLE---Adopting 9.5mm black barrier terminal and standard 30A terminal, the relay module is stable and reliable.
  • ◇ HIGH/LOW LEVEL TRIGGER---The high/low level trigger of the relay module can be switched.
  • ◇ DC5V/DC12V/DC24V---There are 3 styles for you: DC5V, DC12V, DC24V, you can choose one according to your preference.
  • ◇ MAIN FEATURE---Product Name: Optocoupler Isolation Relay Module.
  • Output Capability: AC 250V/30A, less than DC 30V/30A.
Check Stock

EVTSCAN Latest DPA51CM44 3-Phase Monitoring Relay, Current/Voltage Monitoring Relay Phase Sequence Protector for Three-Phase System, Without Neutral, Phase Loss, 208-480VAC

  • ✈ PRODUCT NAME---Voltage Monitoring Relay.
  • Protection function: over voltage, under voltage.
  • Contact capacity: 6A 250VAC (resistivity).
  • ✈ REAL-TIME MONITORING---The voltage monitoring relay could achieve real-time monitoring of dc overvoltage and undervoltage faults, and over-voltage, under-voltage value, and action time can be adjusted.
  • ✈ MAIN FEATURES---The voltage monitoring relay is of 2 sets of normally open and normally closed contacts, 2 indicator lights indicate various working conditions, no additional auxiliary power supply is required.
  • ✈ 35MM GUIDE RAIL---With 35mm guide rail and standard modular structure, the voltage monitoring relay is easy to install, easy to operate.
  • ✈ TYPICAL APPLICATIONS---The voltage monitoring relay is typically applied in dc motor, battery,UPS power supply, dc switchgear, dc panel, industrial control system.
Check Stock

YWBL-WH Relay Module One Way 30A Optocoupler Isolation Relay Module High Power Relay High/Low Level Trigger YYG-2(5VDC)

  • ANTI-INTERFERENCE---Made of the high quality miniature optocoupler, the relay module is of anti-interference ability, stable performance.
  • STABLE AND RELIABLE---Adopting 9.5mm black barrier terminal and standard 30A terminal, the relay module is stable and reliable.
  • HIGH/LOW LEVEL TRIGGER---The high/low level trigger of the relay module can be switched.
  • DC5V/DC12V/DC24V---There are 3 styles for you: DC5V, DC12V, DC24V, you can choose one according to your preference.
  • MAIN FEATURE---Product Name: Optocoupler Isolation Relay Module.
  • Output Capability: AC 250V/30A, less than DC 30V/30A.
Check Stock

4 Pack - EPAuto 30/40 AMP Relay Harness Spdt 12V Bosch Style

  • Heavy-duty impact molded relay socket with 5 WIRES。White (common), Black (normally closed), and Yellow (normally open)..
  • Package Include: 4 relays + 4 relay sockets with wires..
  • Safety UL Listed 6" wires with pigtail leads for the main contact..
Check Stock

Voltage Monitoring Relay DC 12V/24V/36V/48V Over-Voltage and Under-Voltage Protection Relay 35MM Guide Rail 13-17V 10-14V DC48V

  • Protection function: over voltage, under voltage.
  • Contact capacity: 6A 250VAC (resistivity).
  • REAL-TIME MONITORING---The voltage monitoring relay could achieve real-time monitoring of dc overvoltage and undervoltage faults, and over-voltage, under-voltage value, and action time can be adjusted.
  • MAIN FEATURES---The voltage monitoring relay is of 2 sets of normally open and normally closed contacts, 2 indicator lights indicate various working conditions, no additional auxiliary power supply is required.
  • 35MM GUIDE RAIL---With 35mm guide rail and standard modular structure, the voltage monitoring relay is easy to install, easy to operate.
  • TYPICAL APPLICATIONS---The voltage monitoring relay is typically applied in dc motor, battery,UPS power supply, dc switchgear, dc panel, industrial control system.
Check Stock

Painless Performance 70114 Cirkit Boss Heavy-Duty Auxiliary Fuses Block, 3 Ignition-Hot Circuits

  • Safe way to add electrical accessories to any vehicle.
  • This kit allows for the addition of 3 fused circuits to your already existing factory fuse block.
  • Simply mount the fuse block and relay, route the large 10-gauge wire to the battery, route the ignition wire and then route the 3 accessory circuits to the accessories needing power.
  • Main power wire is 8 feet long from fuse block.
  • Each accessory circuit has 8 feet of wire length from fuse block..
  • Provides three ignition hot circuits with a maximum total amperage handling of 70 Amps.
  • Includes: 70-amp SPST relay, Relay base/fuse block with harness, Crimp-on terminals and mounting hardware.
Check Stock