Reviews 16pc Hole Saw

VIKITON 6 Inch Hole Saw with Arbor for Metal Wood and Plastic Cutting, 152mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

  • 【Long Service Life】Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance..
  • 【Superior Versatile Performance】High speed steel sharp cutting teeth effectively drills through metal , wood , corn hole boards, PVC board , plastic and drywall , clean and smooth , high precision..
  • 【Easy to Use】Rotate the arbor and hole saw until it's very close (don't need tight), then line up the locking pins with the hole at the hole saw and screw them tightly..
  • 【High Efficiency】The deep gullets on the sides of hole saw provides fast chip removal, and the geometry funtional slot on the bottom of hole saw provides easy plug removal..
  • 【Package Include】1 pc 6'' hole saw, 1 pc arbor(with 1 drill bit), 1 pc drill bit for replacement, 1 pc hex key..
Check Stock

10 PCS 2 inch Desk Wire Cord Cable Grommets Hole Cover with Hole Saw Kit High Speed Bi-Metal Holesaw Drill Bits for Office PC Desk Cable Cord Organizer

  • Hole Saw Set: Package includes 10 pcs Desk Wire Cord Cable Grommets, 1pcs 2 inch M42 Bi-Metal hole saw, 1pcs 7/16 inch hex drilling shaft, 3pcs drill bit, and 1pcs M4 Hex wrench..
  • Hole Saw Drill Bit: The hole saw drill bit is made of M42 high-speed steel saw blade for better performance in durability and toughness, the cutter head is pointed and can open holes efficiently..
  • Desk Cable Grommets: Made of quality plastic, good comprehensive performance, wear-resistant, corrosion-resistant, durable to use. Removable cover, with an opening hole sleeve, which can open the hole and clip-on top cover, so if you have a lot of cords, you can use the desk grommet without cover..
  • Easy to Install: Just assemble the hole saw with the included hex wrench and drill the hole where needed, punching a hole first, then place the main part of the grommet directly into the hole, the overall size of grommets measures 2.5 x 0.77 inch (Dia. x H), fitted with the mounting hole diameter is 50 mm/ 2 inch..
  • Wide Application: Desk cord grommet can effective cable and wire management, neatly organize the wires from computer desks, PC peripheral, office equipment, entertainment systems in home, office and school..
Check Stock

HJ Garden 5pcs 2 inch Desk Wire Cord Cable Grommets Hole Cover with Hole Saw Kit High Speed Bi-Metal Holesaw Drill Bits for Office PC Desk Cable Cord Organizer

  • Package: 5pcs 2 inch Desk Wire Cord Cable Grommets, 1pc 2 inch M42 Bi-Metal Hole Saw, 1pc 7/16 inch Hex Shaft, 1pc M4 Hex Wrench, suitable for installing and organizing wire and cable of desktop equipment..
  • Desk grommet is made of ABS, with a clip-on cover, convenient to use, excellent comprehensive performance, wear resistance and corrosion resistance, sturdy and durable..
  • How saw is made of M42 high speed hacksaw blade, universal shaft size 1/2" (12mm), high wear resistance, sharp cutting head, efficient and accurate trepanning..
  • Fit for hand electric drill, bench drill, etc. can open holes on wood, iron plate, hard plastic, galvanized pipe and acrylic etc..
  • Easy to install, fter drilling with the hole saw, place the main part of the grommet directly into the hole and start to hide all the cables and wires..
Check Stock

KATA 6-Pack 2 Inch 50mm Desk Grommet Wire Cord Cable Hole Cover with M42 2 Bi-Metal Hole Saw Kit and 2M Cable Sleeve Organizer Cord Wire Wrap Coiled Tube Sleeve Management

  • 【INCLUDES】1PC 51mm (2") M42 Bi-Metal Hole Saw Blade,38mm Depth.
  • 【PREMIUM MATERIAL】The Hole Saw is made of M42 Bi-Metal high speed hacksaw blade,high wear resistance, sharp cutting head, efficient and accurate....
  • 【SIMPLE BUT USEFUL】Installation is simple and convenient:Drill a hole on the desktop with the hole saw blade and the mandrel arbor,then put the....
  • 【KEEP CLEAN AND TIDY】The desk grommets and cable sleeve can effectively manage cables and wires,keep the desktop clean and tidy..
  • 【APPLICATION】The M42 bi-metal hole saw is ideal for hand electric drill, bench drill, etc.Can cut holes easily on wood, iron plate, hard plastic,....
Check Stock

tonchean 6PCS Drill Bits Hole Saw Set Carbide Hole Cutter Set 5/8-2inch(16-51mm) Heavy Duty Hole Saw Kit for Plastic, Stainless Steel, Metal, Iron, Aluminum, Alloy, Wood, with Aluminum Case

  • 【Hole Saw Set Includes】6pcs hole cutters with dimensions 5/8"(16mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-3/4"(45mm), 2"(51mm), 3pcs pilot drill bits and 1 pc hex key. A variety of sizes to meet your different needs..
  • 【High Quality】The Hole Saw is made of stainless steel, High-grade Titanium-plated carbide pilot drill bit, ensuring its high hardness, sturdy, durable and no teeth breakage for any tough job with high-quality stainless steel technology..
  • 【Easy to Use】Carbide Hole Saw Kit Meet all of your cutting and drilling needs with sharp teeth and center drill with spring ,this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the wood chops out of the saw immediately after completing the hole..
  • 【Alumium Case for Portability】When it’s time to carry your hole saw kit with you to other jobs, it’s important to have a good quality case that will protect your heavy duty tools and hold it together so it doesn’t scatter around when it’s time to put it to use. At tonchean, we provide a high-quality hard and tough aluminum case for each hole saw kit for easy storage and convenience..
  • 【Wide Application】Widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, an....
Check Stock

REETAI-FOUR 10Pcs TCT Hole Saw Kit,Tungsten Carbide Tipped Hole Saw Set, Hole Cutter Heavy Duty for Stainless Steel.(5/8\-2-1/8”)

  • 【Meric TCT hole saw set includes】 :10 pcs hole cutters with dimensions 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 30mm(1-1/8"), 35mm(1-3/8"), 45mm(1-3/4"), 50mm(2"), 53mm(2-1/8"),10 pcs pilot drill bits and 1 pc hex key.A variety of sizes to meet your different needs..
  • 【High Quality Material】：This hole saw is made from high quality Tungsten Carbide Tipped Cutters, ensures its high hardness, rust proof and sturdy.The high-end tungsten carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • [Application]: These Hole Saw Sets provide fast and precise cuts into 28MM thickness metal material, they are Industrial grade metal drilling hole cutter for stainless steel, metal, iron. It is also suitable for plastic, aluminum, FRP, etc. Remember to add coolant during continuous high-speed drilling..
  • 【Easy to Use】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. They are suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【Sincere Service】: Drill bit, spring, wrench are included, which make your job more convenient and easier.The pilot drill bit is....
Check Stock

TCT Hole Saw Kit, LAIWEI Carbide Stainless Steel Hole Saw, Electric Metal Drill Saw, Tungsten Alloy Hole Cutter, Carbide Tipped Hole Saw Drill Bit Tungsten Carbide Tipped Hole Saw Drill Bit (14pcs)

  • ⭐ Hole Saw ----- LAIWEI TCT Hole Saw Kit (Carbide Hole Saw) Includes 10 Hole Saws: 16mm Hole Saw, 18mm Hole Saw, 20mm Hole Saw, 25mm Hole Saw, 30mm Hole Saw , 35mm hole saw, 45mm hole saw, 50mm hole saw, 55mm hole saw, 60mm hole saw and 2 drill bits and wrenches..
  • ⭐ Carbide Stainless Steel Hole Saw ----- Sharp tungsten alloy blade can easily cut steel, iron, aluminum, copper and cast iron. The depth of cut reaches 25 mm..
  • ⭐ Drilling --- Spring pilot drill removes chips and saves time. The hole knife cuts cleanly without burrs..
  • ⭐Precautions for electric drill air saw: Use perpendicular to the parts, use cutting oil when cutting metal materials, and start cutting at low speed. Stainless Steel Hole Saw -: Under normal conditions, this tool will last longer than other hole punching tools..
  • ⭐Stainless Steel Hole Saw--: Under normal conditions, this tool will last longer than other hole punching tools..
Check Stock

4 Inch Hole Saw with Heavy Duty Arbor, 38mm Depth High Hole HSS Bi-Metal Cutter Saw 4 Inch Hole Saw Blade for Easily Drilling Soft Metal, Plywood, Plastic, Drywall, Wood, Fiberboard by AConnet (102mm)

  • 【High Performance Material】The 4 inch hole saw is made of M42 high speed steel and bi-metal, with higher hardness (≥64HRC), toughness and wear resistance, increased service life..
  • 【Hole Saw Dimensions】Cutting diameter: 4 inch (102mm).
  • Hole saw arbor shank: 7/16 inch (12mm), fits 1/2" drills..
  • 【Efficient Smooth Cutting】The hole saw blade is combine with sharp teeth, bi-metal band and non-binding clean edge.
  • Sharp duplex tooth for nice edge and sharp.
  • Therefor the hole saw blade cuts smoothly, cleanly and quickly..
  • 【Package Include】 Package include 1 pcs 102mm hole saw, 1 pcs 7/16" hole saw arbor, 3 pcs high-speed steel pilot drills and 1 pcs Allen wrench. Contact us if there any problem with the product. We attach great importance to customer's shopping satisfaction and are willing to solve any problems you have..
Check Stock

ASNOMY 12Pcs M42 HSS Bi-Metal Hole Saw Set, 11/16 inches - 3 inches Large Size Hole Opener Hole Saw Cutter Tool for Drilling Cornhole Board, Plastic, Pipe, Wood, Fiberboard, Soft Metal

  • 12PCS Bi-Metal Hole Saw Kit: Include 11/16″(18mm) , 13/16″(20mm), 15/16"(24mm), 1-1/8"(28mm), 1-3/16"(30mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(45mm), 2"(50mm),2-3/16"(55mm),2-9/16"(65mm), 3"(75)mm,a variety of sizes can meet your different needs,the cutting depth is 1-3/16"(30mm). Each hole saw has a arbor with drill bit..
  • Top Quality: This Hole saw set made from M42 HSS and Bi-Metal,make it have higher hardness (≥64HRC) and higher toughness than standard hole saw, better cutting performance, so that it can cut ceiling tiles and gypsum board smoothly.
  • Cutting is more efficient and clean: The hole cutter made of heavy-duty bimetal and unique sharp HSS has sharper teeth, and has four chip evacuation holes, which has more powerful chip evacuation capability. Make it possible to quickly remove the cutting material, and the cutting edge is smoother.
  • Wide Application: This 4 hole Saw blade perfect for drilling metal sheet, drywall, plastic pipe, wood, PVC, fiberboard, grommet hole, recessed light and can light hole Drilling..
  • Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP..
Check Stock

REETAI-FOUR 10Pcs SDS Plus Concrete Hole Saw Kits, Tungsten Carbide Wall Hole Cutter Cement Stone Drill Bit Sets with Connecting Rod for Brick Stone Concrete Cement.

  • 10pcs Concrete Hole Saw Kit-5 PCS 2-61/64"Hole Opener size:1-3/16"(30mm), 1-19/32"(40mm),2-9/16"(65mm),3-5/32"(80mm), 3-15/16"(100mm).
  • 2PCS SDS connecting rod: M22 SDS plus 11-3/4"(300mm), M22 SDS max 11-3/4"(300mm).
  • 2 PCS 8mm center drill bit 4-1/3"(110mm) ,1pc open end wrench 5/16”*13/32”..
  • High Quality Material-This hole saw is made from high quality Tungsten Carbide Tipped Cutters, ensures its high hardness,durable and works under rough conditions,but also super safe to use and simple..
  • Easy to Use-The masonry wall cutter bit kit fits SDS plus hammer drills(Bosch, DeWalt, Hiltex, Makita, Goplus, and more) to make your hammer drill even more useful.
  • Wide application-Prefect used for Brick, concrete, cement, stone, mixed brick wall, foam wall and installation of air-conditioner..
  • Sales service-If you have any question about product, please feel free to contact us by email or Q&A, the reply will be provided within 24 hours..
Check Stock

REETAI-FOUR 9Pcs SDS Plus Concrete Hole Saw Kits, Tungsten Carbide Wall Hole Cutter Cement Stone Drill Bit Sets with Connecting Rod for Brick Stone Concrete Cement.

  • PREMIUM MATERIAL: The concrete hole saw set is made of high quality tungsten steel and carbide, which is high wear-resistant and durable. From the selection of raw materials to the production, we have carried out strict screening and monitoring. And this hole saw set will provide years of service even under severe use..
  • PACKAGE INCLUDED: 5 PCS Hole Opener：1-2/11”(30mm), 1-3/5”(40mm), 2-9/16 “(65mm), 3-5/32”(80mm), 3-15/16”(100mm).
  • 2PCS SDS connecting rod: SDS 11-13/16”(300mm), SDS max 11-13/16”(300mm).
  • 2 PCS center drill bit 4-1/3”(110mm), which let you quickly punch clean holes in the most commonly needed sizes..
  • SHARPER BLADE: Our concrete hole saw kit feature a unique blade design, coupled with high-quality and tough raw material, which is thicker and sharper than other common blades. The multi-edged blades of the hole saw are designed to make your drilling cleaner, faster, and more efficient. The chip removal hole and inner groove can quickly remove dust, thus preventing clogging..
  • FOR MOST HAMMER DRILLS: The shank of the connecting rod adopts SDS PLUS design, which is compatible with four-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
Check Stock

ASNOMY 7PCS TCT Hole Saw Kit for Metal, 16-30mm Tungsten Carbide Tipped Hole Saw Hole Cutter Drill Bit with Titanium-Plated Pilot Drill bit for Hard Metal, Stainless Steel, Iron, Wood, Plastic

  • ...m-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：5/8"(16mm)，23/32"(18.5mm), 25/32"(20mm), 1"(25mm),1-3/16"(30mm), Cutting Length: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 5pc T.C.T Hole Saw set and 2pcs Extra Titanium-Plated Pilot Drill bit, 2pcs hex wrenches, each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust), which is definitely a perfect gift for you and your family..
Check Stock

DEHUIWI TCT Hole Saw Set,10PCS TCT Hole Saw Kit for Hard Metal, 5/8"-2-1/8" Inch Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【TCT hole saw set includes】 :10 pcs hole cutters with dimensions 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 30mm(1-1/8"), 35mm(1-3/8"), 45mm(1-3/4"), 50mm(2"), 53mm(2-1/8"),10 pcs pilot drill bits and 1 pc hex key.A variety of sizes to meet your different needs..
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for ....
Check Stock