Reviews 160 Ton Hydraulic Crane

Stark 1/2 Ton Capacity Pickup Truck Extra Lift Hoist Load Crane Telescopic 1100lbs Extension Lock Position Swivel Base

  • Manual Hydraulic Plunger - The truck crane hoist is equipped with a hydraulic plunger. The hydraulic plunger starts simply by turning the handle. The combination of grip and hydraulic plunger makes operation labor-saving and efficient.
  • Industrial Material - Our winch crane adopts steel material, also known as alloy steel, which has higher strength than carbon steel. Its low carbon content and low alloying element content effectively improve the stability, plasticity, and welding properties.
  • Easy to Store & Operate - Our crane hoist allows a person to easily lift the engine, generators, compressors, and other small equipment into the car. It is widely used in pickup trucks, towing lathes, ships, suitable for construction, forestry, factories, and transportation.
  • Max 1,100LBS Capacity - The crane's arms are adjustable in four length classes, with the arms measuring 44" in the shortest case and able to withstand up to 1,100 pounds of lifting. At full extension, the components length and effectively support up to 500 pounds.
  • 360 Base Swivel - The base of the crane is removable and effortlessly installed. The bottom of the pickup truck crane rotates 360° according to handling requirements. The cantilever is centered on the shaft and swivels in different dire....
Check Stock

Dragway Tools 2 Ton Folding Hydraulic Engine Hoist Cherry Picker Shop Crane Hoist Lift with 6 Fully Rotating Caster Wheels

  • Dragway Tools 2 Ton Folding Hydraulic Engine Hoist Cherry Picker Shop Crane Hoist Lift.
  • (6) Fully Rotating 3" Steel Caster Wheels Easily allow for easy maneuverability.
  • 5/16in. Hook on a 12in. Forged Steel Chain.
Check Stock

Apex S-CRANE-1000 Pickup Truck Bed Hoist Jib Crane - 1,000 lb Cap

  • Portable pickup truck or trailer bed jib crane allows for one person to easily lift engines, watercraft, and more.
  • Maximum 1,000 lb capacity with boom contracted, and 400 lbs with boom extended.
  • Swivel base rotates 360 degrees with locking arm.
  • 8 Pre-drilled 0.75" holes in a 10.625" square base-plate for mounting to truck or trailer bed.
Check Stock

VEVOR Davit Crane, 1100lbs Pickup Truck Crane, 360°Swivel Design, Hydraulic Crane Hoist Telescopic Hoist Crane for Truck, Crane Hitch for Lifting Goods in Construction, Factory, and Transport

  • 【MAX. 1100 LBS CAPABILITY】- The crane's arms are adjustable in four length classes, with the arms measuring 44" in the shortest case and able to withstand up to 1,100 pounds of lifting. At full extension, the components are 68" length and effectively support up to 500 pounds..
  • 【MANUAL HYDRAULIC PLUNGER】- The truck crane hoist is equipped with a hydraulic plunger. The hydraulic plunger starts simply by turning the handle. The combination of grip and hydraulic plunger makes operation labor-saving and efficient..
  • 【Q235 STEEL & SPRAY PAINT】- The davit winch crane adopts Q345 steel material, also known as alloy steel, which has higher strength than carbon steel. Its low carbon content and low alloying element content effectively improve the stability, plasticity, and welding properties..
  • 【360°BASE SWIVELS】- The base of the davit crane is removable and effortlessly installed. The bottom of the pickup truck crane rotates 360° according to handling requirements. The cantilever is centered on the shaft and swivels in different directions..
  • 【EASY TO STORE & OPERATE】- Davit crane hoist allows a person to easily lift the engine, generators, compressors, and other small equipment into the car. It is widely used in pickup trucks, towing lathes, s....
Check Stock

VEVOR Davit Crane, 2000lbs Pickup Truck Crane, 360°Swivel Design, Hydraulic Crane Hoist Telescopic Hoist Crane for Truck, Crane Hitch for Lifting Goods in Construction, Factory, and Transport

  • Max. 1000 Lbs Capability: The crane's arms are adjustable in four length classes, with the arms measuring 44" in the shortest case and able to withstand up to 2,000 pounds of lifting. At full extension, the components are 68" length and effectively support up to 1000 pounds..
  • Manual Hydraulic Plunger: The truck crane hoist is equipped with a 16" hydraulic plunger. The hydraulic plunger starts simply by turning the handle. The combination of grip and hydraulic plunger makes operation labor-saving and efficient..
  • Q235 Steel & Spray Paint: The davit winch crane adopts Q345 steel material, also known as alloy steel, which has higher strength than carbon steel. Its low carbon content and low alloying element content effectively improve the stability, plasticity, and welding properties..
  • 360° Base Swivels: The base of the davit crane is removable and effortlessly installed. The bottom of the pickup truck crane rotates 360° according to handling requirements. The cantilever is centered on the shaft and swivels in different directions..
  • Easy to Store & Operate: Davit crane hoist allows a person to easily lift the engine, generators, compressors, and other small equipment into the car. It is widely used in pickup trucks, towing lathes, ships, suitable for const....
Check Stock

BAOSHISHAN 6 Ton Double Ram Bottle Jack 6-1/4\ to 15-3/4\ Lifting Range Hydraulic Welded Bottle Jack Car Jack

  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/4"..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 6 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [PARAMETER] - Rated capacity: 6 ton (12,000 lbs) | Max height: 400mm/15.75" | Min height: 160mm/6.30" | Total lift: 9.45" | Adjustable height: 60mm/2.36" (extension screw top) | Net Weight: 4.9kg/10.8lbs.
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or malfunction of the bottle jacks, please do not hesitate to contact the after-sales service to replace it..
Check Stock

Honhill 2 Ton Folding Hydraulic Engine Hoist Cherry Picker Shop Crane Hoist Lift Heavy Duty Steel with 6 Iron Caster Wheels for Warehouses, Factory, Ports

  • 2T Load Bearing — 2 ton folding hydraulic made of high grade steel and built in accordance with strict quality and durability standards, it can maintain its shape and is very safe in use. Bearings can weigh up to 2 Ton /4000 pounds..
  • 4 Adjustable Positions and Foldable Design - There are 0.5T/1T/1.5T/2T, a total of 4 adjustable load-bearing positions, which can meet your different needs. The detachable handle is stored by the side ring, and the crane is folded up for easy storage..
  • 6 Independent Casters - Folding engine hoist with 6 rotating wheels, can rotate and swing in any direction to meet your needs in all directions. This is a good choice for transportation engines..
  • Better Stability - The wide base and thick steel legs provide better stability, allowing you to use it more safely and reliably..
  • Lifting Height Range: 0-201cm (0-79.13in), suitable for outdoor, construction sites, ports, warehouses, workshops, factories, etc. Note: The product is shipped separately from the body and base, you will receive two packages.
Check Stock

OTC 1515B 10-Ton Hydraulic Portable Collision Repair Set

  • OTC's 10-Ton Capacity, Portable Hydraulic Collision Repair Set has the power and components to quickly and safely move damaged metal.
  • With this set's heavy duty, single-speed, hand powered hydraulic pump and snap-together components you can exert hydraulic force just where it's needed to lift, spread, bend, or straighten.
  • Handles the high force jobs you face daily in collision repair, trailer maintenance, industrial service, and more.
  • Includes: 10-Ton, 6 Inch Stroke Ram, Hydraulic Hand Pump, Hose, 4 Ext. Tubes, Tube Coupling, 1/2-Ton Spreader, Serrated Saddle, Flat Base, Ram Toe, Std. & 90 Deg. Wedge Heads, Flex Head, Plunger Toe.
  • Rugged molded plastic storage case keeps set contained and organized.
  • features wheels for ease of mobility - simply roll the case to the work.
Check Stock

SWAG Off Road 20 TON Finger Brake Heavy Duty DIY Builder Kit

  • Attach to Most Standard 12-Ton or 20-Ton Hydraulic Shop....
  • Upper Die Mounting Cup Inside Diameter: 41....
  • Overall Dimensions: 14.50 in. Wide x 7.50 in. Deep x 9.25 in. High JEGS 81492 Press Break Attachment for 12-Ton or 20-Ton hydraulic shop presses makes....
  • Bends mild steel and aluminum with a maximum width of 12 in. and thickness of 3/8....
Check Stock

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

  • Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
  • Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
  • Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
  • Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
  • High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Check Stock

5 Gallon Bubble Magic Washing Machine + Ice Hash Extraction 5 Bags Kit GROW1

  • THE MONSTER PRESS - The Best 8-Ton / 16,000 Pound Hydraulic Ram Press in the Market - Capacity Out of: 5" x 7" Inch Bricks with up to 3" Inches Deep in Thickness,.
  • High Tech Hydraulic Presses Are Recommanded & Used by Professionals. High Tech Innovative Original & Proven Desgined Presses are fully machined presses built from aircraft aluminum. All of our Presses are a precision state-of-the-art piece of equipment,.
  • Made in USA - HighTech Hydraulic Press Has Been America's Premeir Brand of The Most Outstanding Presses in the World. Such as, the best selling 4-Ton Brick Press, the 8-Ton Monster Press & the new, 10-Ton, The Big Bastard Press,.
  • Easy to Clean. Does Not Get Hot. Durable. Can be used repeatedly many times for a long time. Does not contain any harmful objects or materials,.
  • Capable of Getting Heated. Monster Press has no Limits. When heated, the aircraft aluminum transfers and retains heat much more efficiently and effectively than steel. (Other Presses are made out of steel not aircraft aluminum). Utilizing machined aluminum (instead of welded steel) allows Hightech Presses to be constructed from one solid piece of material so there are no seams or gaps and everything fits together perfectly for the life of the Press..
Check Stock

5 Gallon Bubble Magic Washing Machine + Ice Hash Extraction 5 Bags Kit

  • The machine is made of 6061 aluminum, 4-piece of chrome steel and 12 ton hydraulic cylinder..
  • Dual heating rods for each 4x7" heated platen - 300 watts per rod, 1,200 watts in total..
  • Recommend pairing it with 12 ton hydraulic hand pump (dp-cp590g) or other pump with NPT 1/4" male coupler..
  • Both PID temp controller and hydraulic cylinder allow replacing for a long service life..
  • Dual 15mm thick insulation wood to protect the equipment from overheating..
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock