Reviews 12sided Dies

TEMCo TH0006 Hydraulic Electrical Cable Lug/Terminal Crimper Kit with 18 Die Sets 12 AWG - 00 (2/0) (5 US TON)

  • New for 2020, TH0006 Version 2.0. Released September 1st 2020, all units now include the following improved features:.
  • TRUE-HEX Crimp Forming dies apply uniform pressure on all sides for even compression and high pull out resistance..
  • 9 Standard size dies for American Wire Gauge 12 through 2/0 (00). Dies conform to DIN industrial standards and are compatible with all US domestic market terminals, including color coded lugs. Dies imprint the size into the crimped terminal for code compliance inspections..
  • 9 additional plus size dies cover the hard-to-fit non standard lugs like heavy cast or thin-wall terminals. All 32 dies are black oxide coated, Won’t chip or flake like chrome plated versions..
  • Capable of crimping all battery and welding cable, building wiring, crimp terminal lugs (including heavy cast lugs) combined with a 5 Year Warranty from a well-known American name..
Check Stock

Watch Press Tool, TOPWAY Watch Back Press is Suitable for Watches(18-50mm). Watch Case Press (with 12 dies) for Closing Watch Back Cover and Watch Opener Knives for Watch Battery Replacement Tool Kit

  • ...used at home, whether it is a professional or a beginner.It can also be used as a valentines day gifts for your lover..
  • 【12 Dies for Your Watch】This watch case press is equipped with 12 dies, which are suitable for snap-off watches of 18-55mm sizes. There are 10 double-sided dies, such as 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm. Different types meet your various watch back press needs. There are also 2 special dies for crystal watches. The dies are marked with dimensions, helping you quickly find the right die and improve work efficiency..
  • 【Easy operation】This watch press set back case closer only takes 3 steps to close the watch back cover - Firstly, select 2 suitable dies and screw them on the watch press machine. Secondly, put the cleaning cloth on the lower die and the watch on the cleaning cloth. Thirdly, press the press tool at this time to complete the operation. It should be noted that the lower mold need to be larger than the watch glass, and the upper mold need to be smaller than the watch back cover ..
  • 【Well-made】This watch case press manchine is made o....
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ... you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

Hanson 12008 1\ Rd Hex Plain Die Stock for Tap Die Extraction

  • ...hreads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die handle, small tap chuck, and a carrying case for your convenience.
Check Stock

UTZIKO Hydraulic Cable Lug Crimper 10 US TON 12 AWG to 00 (2/0) Electrical Terminal Cable Wire Tool Kit with 9 Die (12awg~00awg Crimping Tool)

  • Professional tool to attach lugs to the ends of heavy duty power cables and wires. The C-style head makes side entry easy to access and operate. Crimps 12 AWG to 2/0 AWG size copper and aluminum wires..
  • Crimping range is from 12AWG to 2/0AWG. Maximum crimping power 10 tons. Vinyl-dipped grip for comfort and easy control. A carrying case is included to sort of all necessary parts..
  • Easy operation and easy to change the dies. On-Off control for speedy operations.Innovative tongs with guide rails effectively control the die so that it does not sway from side to side.Innovative return spring makes one-handed operation very smooth..
  • 9 pairs of hexagon dies；Complete set of seals；a Hydraulic Crimping Tool Instruction..
  • 100% money back guarantee. All items have been double inspected before on market..
Check Stock

Alinacutle Mini Album Die Metal Die Cut,15X15CM Size, Paper Craft Metal Die-Cuts,DIY Album,Scrapbooking Cutting,DIY Card Metal Punch Template

  • 15x15CM MINI ALBUM DIES - Including album frame dies,album border dies,inner page dies, insert page dies,frame border dies, decorative page dies,and variety of decorative accessories Dies..
  • APPROXIMATE DIE DESIGN SIZE - ALBUM FRAME DIES - 15.3x15.3cm,ALBUM SPINE DIES - 6.6X15.2CM.
  • DIE CUT MATERIAL:High quality steel with chrome surface finishing.
  • CUT A VARIETY OF MATERIALS - With Alinacutle die cuts you can cut a variety of materials from cardstock, paper, 0.1mm plastic sheet, craft Aluminium foil,foam paper.
  • CREATIVE & USAGE - You can create a variety of projects from mini album,planner,paper cards,decoration of bags, boxes, planner,album,photos, scrapbook pages, home decoration, fashion goodies & so much more..
  • COMPATIBILITY - Most major brand cutting machines.
Check Stock

13pcs Watch Press Tool Set with 12 Dies Back Case Closer Watch Repair Tool

  • Easy & quick to fix watch: only three steps - choose two suitable dies, screw them on the press tool, and then press down the handle. Comes with 12 assorted dies: 24, 26, 28, 30, 31, 32, 33, 34, 36, 38, 40 & 42 Snap-on system allows dies to snap on and off quickly High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
  • Comes with 12 assorted dies: 24, 26, 28, 30, 31, 32, 33, 34, 36, 38, 40 & 42.
  • Snap-on system allows dies to snap on and off quickly.
  • High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases.
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ... you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

RIDGID 44923 Model 690-I Hand-Held Power Drive Kit, Pipe Threading Machine and 1/2-Inch to 2-Inch 11-R NPT Pipe Threading Die Heads with Carrying Case for Threading Pipe

  • ...hreads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die handle, small tap chuck, and a carrying case for your convenience.
Check Stock

AZUNO 60-Piece Metric&SAE Tap and Die Set, GCr15 Bearing Steel with T-Handle/Wrench/Gauge/Screwdriver in Storage Case, Master Threading Toolkit

  • 【60 Piece Tap and Die】: Set includes 54 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Constructed by quality GCr15 bearing steel with pronounced performance in threading..
  • 【Common Sizes in Metric & SAE】: 10MM Dies&Taps: M3x0.5,M4x0.7,M5x0.8,M6x1.0,M7x1.0,M8x1.25,M9x1.25,M10x1.5,M10x1.0,M12x1.75.
  • 10UNC Dies&Taps: 4-40,6-32,8-32,10-24,12-24,1/4,5/16,3/8,7/16,1/2.
  • 6UNF Dies&Taps: 10-32,1/4,5/16,3/8,7/16,1/12.
  • 【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced ductility..
  • 【Easy for Storage】: Comes with a heavy-duty storage case, convenient for storage and carrying. It has identified slot for each piece so that to keep neat and easy finding..
  • 【Versatile Threading Tool Set】：This MASTER set is perfect for cutting and renewing external and internal threads to exact standards. Durable to process on hard metal such as alloy, steel and brass, for all-day performance in the shop or home project..
Check Stock

Azuno 60PCS Metric&SAE Tap and Die Set, Titanium Coated GCr15 Bearing Steel with T-Handle/Wrench/Gauge/Screwdriver in Storage Case, Master Threading Toolkit

  • 【60pcs Titanium Coated Tap and Die】: Set includes 54 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Constructed by quality GCr15 bearing steel with titanium coating that ensures higher durability in threading..
  • 【Common Sizes in Metric & SAE】: 10MM Dies&Taps: 3x0.5,4x0.7,5x0.8,6x1.0,7x1.0,8x1.25,9x1.25,10x1.5,10x1.0,12x1.75.
  • 10UNC Dies&Taps: 4-40,6-32,8-32,10-24,12-24,1/4,5/16,3/8,7/16,1/2.
  • 6UNF Dies&Taps: 10-32,1/4,5/16,3/8,7/16,1/12.
  • 【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced ductility. Titanium coating on the finish ensures higher durability on hard metal..
  • 【Easy for Storage】: Comes with a heavy-duty storage case, convinient for storage and carrying. It has identified slot for each piece so that to keep neat and easy finding..
  • 【Versatile Threading Tool Set】：This MASTER set is perfect for cutting and renewing external and internal threads to exact standards. Durable to process on hard metal such as alloy, steel and brass, for all-day performance in the shop or home project..
Check Stock

LYECUN Watch Press Set Back Case Closer, Watch Crystal Press, Watch Press Set, Watch Battery Replacement Tool

  • ... 【High Quality】: The watch press tool is made of all metal, the mold is ABS plastic, the net weight of a single watch press tool is 350 grams, it is sturdy and durable.
  • 【Wide Range of Adaptations】: This watch press set comes with 12 dies, including 10 double-sided dies and 2 special dies. Suitable for most sizes of the press-fit watch repair and battery replacement use.
  • Equipped with a cleaning cloth, put it between the watch glass surface and the mold before pressing to avoid scratching the glass.
  • 【Simple Operation】: 1. Select the appropriate size mold (please check the details page below for the specific selection method). 2. Place the mold and the watch in order, adjust the upper and lower balance, and ensure that there is no offset. 3. Slowly turn the rotary handle of the watch press tool and press the back cover of the watch.
Check Stock

TEMCo Industrial Hydraulic Cable Lug Crimper TH0005 V2.0 (11 US TON) 10 AWG to 600 MCM Electrical Terminal Cable Wire Tool Kit with 32 Die Sets

  • New for 2020, TH0005 Version 2.0. Released September 1st 2020, all units now include the following improved features:.
  • TRUE-HEX Crimp Forming dies apply uniform pressure on all sides for even compression and high pull out resistance..
  • 16 Standard size dies for American Wire Gauge 10 through 600MCM. Dies conform to DIN industrial standards and are compatible with all US domestic market terminals, including color coded lugs. Dies imprint the size into the crimped terminal for code compliance inspections..
  • 16 additional plus size dies cover the hard-to-fit non standard lugs like heavy cast or thin-wall terminals. All 32 dies are black oxide coated, Won’t chip or flake like chrome plated versions..
  • Capable of crimping all battery and welding cable, building wiring, crimp terminal lugs (including heavy cast lugs) combined with a 5 Year Warranty from a well-known American name..
Check Stock