Reviews 11 Ft Lift Height Maximum
HTM-100 HangPro™ Drywall Lift for WALLS
- Maximum lift weight 130 lbs and can handle panels up to 4-ft x 16-ft.
- Contractor grade heavy gauge steel, powder coated, heavy duty auto locking winch, large rubber tires and durable casters for years of safe usage.
- Increases safety and reduces injuries and exhaustion due to no dragging lifting, adjusting or holding heavy panels..
Check StockVEVOR Drywall Lift Rolling Panel, 11ft Sheetrock Lift Drywall Lift, 150lb Weight Capacity Panel Hoist Jack Tool, Steel Material w\\/Telescopic Arm & 3 Lockable Wheels, 48x192 in Plasterboard Size
- 150 lbs Load Capacity: This drywall lift is made of heavy-duty carbon steel, ensuring its longevity and durability. With a maximum load of 150 pounds, this drywall rolling lifter panel is ideal for home and commercial use..
- Adjustable Height & Length: The telescopic arm can be adjusted from 4 to 9.5 ft, perfect for installing sheets. And the sheetrock lift drywall lift can reach a height of 11 ft that can help you attach to the ceiling..
- 60° Tiltable Rotation Panel: Our drywall lift panel hoist can tilt 60° forward or backward and rotate 360 degrees. Thus, it is widely used in flat and inclined ceilings..
- Secure & Good Balance: The cradle of the drywall hoist features locking outriggers. The entire unit is supported by a broad tripod base with 3 anti-slip locking casters for secure mounting. Thus, it is flexibly moving but stable enough..
- Easy Assemble & Operation: The drywall panel lift hoist is easy to assemble and disassemble without tools. The hoist jack lifter features labor-saving with a winch. It is perfect for DIY and residential use, allowing one person working alone to install plasterboard or plank..
Check StockFREESEA 330 GPH 25W Submersible Water Pump for Pond Aquarium Hydroponics Fish Tank Fountain Waterfall
- ★Smart control, dry running automaticly cut power.(Principle:Dry running opreation will increase motor temperature, then the pump will automatically shut down, but the motor will restart working after the temperature goes down. Therefore, when the motor automatically turned off we need to cut off power immediately. This function can effectively reduce the damage caused by dry running.).
- ★With bottom suction trainer,100% submersible..
- ★Maximum flow rate: 330GPH STRONG POWER and HIGH LIFT. Max Lift Height: 6 ft. 25W high efficiency motor for energy saving..
- ★Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly) SUCTION CUP and 5.9Ft POWER CORD. Long enough cord for easy installation..
- ★Backed by 12 month warranty and professional after-sale service within 24hrs..
Check Stock2771-20 M18 For Milwaukee Tool Water Transfer Pump (Bare Tool)
- Features:Cordless Transfer Pump, Battery Platform M18, Maximum Flow Rate 8.
- Voltage: 18V Length & Width x Height: 13.2" x 5.75" x 6" Head Height: Up to 75ft Outlet/Inlet Connections: 3/4" Lift up to 18' Weight: 7.9 lbs.
- Faster Water Transfers, Faster Service Calls. The M18 Transfer Pump brings new to world cordless innovation to the industry with the fastest setup in the marketplace. With a self-priming pump, you can connect and go quicker than ever. The tool’s flexible impeller and powerful pump moves water at up to 480 gallons per hour, generates up to 18’ of lift and produces up to 75’ of head height..
- Inlet connection: 3/4 in. brass Outlet connection: 3/4 in. brass Head height: up to 75 ft..
Check StockVIVOHOME 120V 440 Lbs Lift Electric Hoist with Remote Control, Electric Winch, Garage Ceiling Crane Overhead, Zinc-Plated Steel Wire Hoist for Garage, Warehouses, Factories Lifting
- It features a height limitation device that prevents the user from lifting heavy objects past a safe height and damaging the machine body.
- DUAL-LINE OPERATION - Designed with a pulley lifting hook for dual-line operation.
- Single line lift specifications: 220 lbs. at 33 ft/min with a maximum height of 38 ft..
- Double line lift specifications: 440 lbs. at 16.5 ft/min with a maximum height of 19 ft..
- REMOTE CONTROL - The electric hoist comes with a remote control that allows for operation from distances of up to 98 ft..
- This is an ideal solution when the hoist is placed far from the operator or on high beams, where conventional wire controls are not practical.
- The capability also allows for a safer site, as the operators can stay away from the lifting area.
- The stop button stops the machine running while emergency case.
- SAFE AND DURABLE - The entire copper motor is covered by a durable aircraft-grade aluminum alloy housing.
- This sturdy electric winch is compact, lightweight, and built for long-term use.
- It has an overheating protection system that includes a built-in high-speed 8-page fan and a large lattice window that dissipates heat quickly.
- The electric hoist is designed with a built-in safety braking structure.
Check StockPanelLift Hangpro Drywall Lift for Walls Model 150
- Great for any panel shaped material including drywall, OSB, plywood, insulation, cement board, siding, etc..
Check StockPowerbuilt 20 Ton Bottle Jack with 9-11/16 inch to 17-5/8 inch lifting range, portable hydraulic car jack with carrying case- Red 640503
- forged iron saddle with a lifting range of 9-11/16 in. to 17-5/8 in.
- Forged steel saddle and cast handle socket for maximum height.
- Pin style release valve for easy operation, extension screw provides added lift height and meets or exceeds ANSI standards.
- Made to be the most reliable tools in the market today.
- Extension screw provides added lift height.
Check StockGoplus Lift Electric Hoist Garage Auto Shop Electric Wire Hoist Overhead Lift w/Remote Control (440LBS)
- 【Heavy Duty And Durable】High strength carbon steel line cable, braided, anti twist. Cable length of 39ft, diameter is 1/8″. Rugged steel shell and mounting hanging clamp brackets, with reliable hardware, makes our mini electric wire host strong and durable enough to withstand heavy use..
- 【Sheaved Pulley Lift Hook For Dual Line Operation】2 heavy duty weighted lift hook, maximum load capacity ups to 220lbs each, 440lbs total. Lift speed of 26ft per minute of single hook, 13ft per minute of double. Max lift height of 39ft of single, 20ft of double hooks..
- 【High Quality Cooper Motor】ETL Approved grade, features good heat dissipation ability. It provides strong power with relative low electricity consumption..
- 【Built-in Safety Braking Mechanism】With easy operate remote control panel, fully automatic hoist, requires no hand cranking. Item features automatic brake function with build-in safety braking mechanism and thermal protection device to ensure safety..
- 【Easy to Operate】It comes with all necessary mountings. Simply assembled then ready to use. Compact construction, lightweight, easy operation, perfect for lifting small engines, transmissions, large shop tools, or building supplies in factories, warehouses and cargo berth..
Check StockRUTU Hydraulic Motorcycle Lift Stand – Heavy-Duty Steel Maintenance Hoist Jack for Dirt Bike, Snowmobile - Motorcycle Stand Lift with 440Lbs Capacity - Motorbike Repair Accessories Tools
- Versatile Garage Equipment - This motorbike lift has 2 height levels: minimum platform height 11.6 in. (295mm)/maximum (raised) platform height 15.15 in (385mm). Ideal for motorbikes with11.81 in. –13.78 in. (300mm-350mm)bottom frame / engine- ground clearance. Please measure the minimum ground clearance of your motorcycle before purchasing, to avoid the stand's minimum height being too high and unable to use..
- Sturdy Construction, Utilitarian Design - This motorcycle jack stand features a reinforced welded steel frame for added strength and stability. The hydraulic pump operates smoothly, and a built-in damper makes lowering your bike safer and easier. Nylon stabilizing bushing reduces the gap between the steel frame, preventing wobble after raising your motorcycle..
- Anti-slip Nitrile Surface& Weight Capacity - The motorcycle stand has a durable rubber pad and scratch-proof work surface that protects bikes from slipping, and scratches that cause rust, the non-slip platform measures 11 1/32 x 7 7/8 In. (280x200mm), 8 round head rivets fasten the rubber pad tightly. It has a maximum load capacity of 440 lbs (200 KG).This also makes it suitable for ATV....
Check StockFor Milwaukee utility pump 2771-20 M18 Water Transfer Pump (TOOL ONLY)
- Faster Water Transfers, Faster Service Calls. The M18 Transfer Pump brings new to world cordless innovation to the industry with the fastest setup in the marketplace. With a self-priming pump, you can connect and go quicker than ever. The tool’s flexible impeller and powerful pump moves water at up to 480 gallons per hour, generates up to 18’ of lift and produces up to 75’ of head height..
- Features:Cordless Transfer Pump, Battery Platform M18, Maximum Flow Rate 8.
- Voltage: 18V Length & Width x Height: 13.2" x 5.75" x 6" Head Height: Up to 75ft Outlet/Inlet Connections: 3/4" Lift up to 18' Weight: 7.9 lbs.
Check StockGROWNEER 550GPH Submersible Pump 30W Ultra Quiet Fountain Water Pump, 2000L/H, with 7.2ft High Lift, 3 Nozzles for Aquarium, Fish Tank, Pond, Hydroponics, Statuary
- UL Certified & WATER FLOW CONTROL -- Our water pump meet UL 1081standard. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 550GPH (2000L/H)..
- STRONG POWER & HIGH LIFT -- Max Lift Height: 7.2ft. Model number is SML-630. 30W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)..
- 3 NOZZLES -- Each water pump has 3 nozzles for option: 0.51"/0.62"/0.75". Provide a different water flow as you desired. Threaded fittings make it more stable. Detachable and cleanable..
- SUCTION CUP & 5.9FT POWER CORD -- Long enough cord for easy installation. 4 individual powerful suction cups help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally..
- WIDELY APPLIED -- Circulate and aerate the water, making it more attractive to your fish or turtles. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc..
Check StockVEVOR Drywall Lift Rolling Panel, 16ft Sheetrock Lift Drywall Lift, 150lb Weight Capacity Panel Hoist Jack Tool, Steel Material w/Telescopic Arm & 3 Lockable Wheels, 48x192 in Plasterboard Size
- 150 lbs Load Capacity: This drywall lift is made of heavy-duty carbon steel, ensuring its longevity and durability. With a maximum load of 150 pounds, this drywall rolling lifter panel is ideal for home and commercial use..
- Adjustable Height & Length: The telescopic arm can be adjusted from 4 to 9.5 ft, perfect for installing sheets. And the sheetrock lift drywall lift can reach a height of 16 ft that can help you attach to the ceiling..
- 60° Tiltable Rotation Panel: Our drywall lift panel hoist can tilt 60° forward or backward and rotate 360 degrees. Thus, it is widely used in flat and inclined ceilings..
- Secure & Good Balance: The cradle of the drywall hoist features locking outriggers. The entire unit is supported by a broad tripod base with 3 anti-slip locking casters for secure mounting. Thus, it is flexibly moving but stable enough..
- Easy Assemble & Operation: The drywall panel lift hoist is easy to assemble and disassemble without tools. The hoist jack lifter features labor-saving with a winch. It is perfect for DIY and residential use, allowing one person working alone to install plasterboard or plank..
Check StockLittle Giant WRS-6 1/3HP Water Removal System - 115V- Integral- 7-10\ On Level
- BUILT TO LAST: Rugged epoxy-coated cast iron housing and volute, thermoplastic elastomer vortex-style impeller, Nitrile with carbon/ceramic faced mechanical shaft seal.
- handles solids up to 2-inches in diameter.
- AUTOMATIC OPERATION: Piggy-back mechanical float switch activates the pump when liquid reaches 16 to 19 inches and turns the pump off when liquid reaches 9 to 11 inches.
- PUMP SPECIFICATIONS: 7200 GPH at 5-foot lift.
- maximum water temperature of 140 degrees F, 20-ft. cord, 2-inch FNPT discharge.
Check Stock