Reviews 10mm Porcelain Material

GoYonder Super Thin 4.5\ Grinder Blades Tile Blade, Diamond Saw Blade for Cutting Porcelain Tiles Granite, 115mm Tile Cutting Blade for Angle Grinder

  • ...d high strength. Available in various sizes to choose, the size is: 115 x 10 x 1.2 x 22.23mm, Thickness: 1.2mm, Outer Diameter:115mm /4.5 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.22mm thickness..
  • 【Grinder Blades Wet & Dry】: This tile blade 4.5 features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use..
  • 【Turbo Rim Design 】: The wet tile cutting blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.2mm thickness can keep staying original diameter makes it easier to make straight cuts and deeper cuts..
Check Stock

XINGYHENG 30Pcs 10W 10 Ohm 5% Cement Resistors Ceramic Cement Resistor Wire Wound Fixed Metal Full Range Resistors Kit White

  • 1. Durable material: The cement resistors are made of cement, the resistance wire is wound on the non-alkaline heat-resistant porcelain, and the heat resistance, moisture resistance and corrosion resistance are added on the outside. The material protection is fixed, and the wire wound resistor body is placed in a square porcelain frame and sealed with a special non-combustible heat-resistant cement..
  • 2. Great quantity: 30pcs resistor will be sold together. It will meet all your requirement. A cement resistor is a type of wirewound resistor that is a relatively high-power resistor that allows a large current to pass. Its function is the same as the general resistance, but it can be used in the case of large current, such as connecting with the motor, limiting the starting current of the motor, and the resistance is generally small..
  • 3. High quality: The cement resistor has the characteristics of small size, shock resistance, moisture resistance, heat resistance, good heat dissipation and low price. Super wear-resistant, anti-oxidation and corrosion resistance, can effectively reduce the data loss, to ensure high sensitivity of the signal..
  • resistance: 10 Ohm 5% . Size is 47mm/1.85’’ x 10mm/0.39’’x 9mm/0.35’’. Lea....
Check Stock

6\ Super Thin Diamond Saw Blade Diamond Blade Dry or Wet Cutting for Granite Marble Porcelain Tile

  • 6" Porcelain tile blade:wet or dry cutting..
  • Porcelain blade cuts cool with increased life and cutting speed..
  • Available for cutting porcelain tile,ceramic tile, granite,marble,sandstone quartz ect.
Check Stock

Replace parts Heat Plate and Burner Right & Left Replacement Parts for Members Mark Gas Grill Model SAMS B10PG20-2C B10PG20-2R GR2001402-MM-00 GR3055-014571 2-Pack

  • Includes 2-Pack Porcelain Steel Heat Plate and Stainless Steel Burner( Right & Left).
  • Fits Members Mark B10PG20-2C, B10PG20-2R, GR2001402-MM-00, GR3055-014571.
  • Heat plate Dimensions: 11 13/16 x 8 7/16", Material: Porcelain Steel.
  • Burner Dimensions: 12 1/4 x 4 5/8", Material: Stainless Steel.
Check Stock

Diamond Drill Bit Set,10 Pieces Diamond Hole Saw, Glass Hole Saw for Tiles Glass, Ceramic, Porcelain, Marble, Bottles, DIY,6mm - 30mm

  • ... Nickel plated with diamond powder coating provides superior performance and cutting strength for extended life. High quality and performance, this diamond bit is perfect for making clean and accurate holes, making it your best choice..
  • Versatile: This diamond coated bit can remove a full circle from glass, ceramic, porcelain, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass or other materials..
  • Applicable drill models: Can be used with three-claw/round shank ordinary bench drill, hand electric drill or rechargeable drill(not included), as long as the tool chuck can be adjusted to 6-10MM are available. Note: Not suitable for electric hammer, electric pick electric grinding pen.Water is required for lubrication when drilling, otherwise the diamond coring drill will burn. WARNING: Not for use with concrete or depths greater than approximately 1/2"..
  • 10 sizes:No markings for size on the item.There are 10 different sizes (6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 30 mm), different sizes to meet your different needs and help you in different places..
Check Stock

GoYonder 4 Inch Diamond Saw Blade,Super Thin Diamond Saw Blade for Cutting Ceramic Porcelain Tile Granite Marble Suitable for Angle Grinders with 7/8 or 5/8 Arbor 5 PCS

  • Thickness：1.2 mm, Outer Diameter: 105 mm /4 inch.
  • With reducer washer suitable for most tile saws and hand-held....
  • ✅ X teeth rim design not only provides faster cutting but also ensures a longer service life..
  • ✅ Super thin porcelain blade with free chips for precision cutting, avoid waste of material. Universal for DRY or WET CUTTING..
  • ✅ GoYonder diamond saw blades are designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, and cement backer....
  • ✅ Warm Prompt: For your personal protection, before you start working we recommend that you wear safety glasses, dust aspirators, welding gloves,....
Check Stock

Super Thin Tile Saw Blade 7\ Diamond Saw Blade for Cutting Granite Marble Porcelain Tile (7\) …

  • 7" Diamond Porcelain Cutting blade:wet or dry cutting..
  • Cooler rim increases life and cutting speed.
  • Available for cutting porcelain tile,ceramic tile, granite,marble,sandstone quartz ect.
Check Stock

Diamond Core Drill Bit Set - for Porcelain Tile Ceramic Marble Granite Drilling,BRSCHNITT 1/4' 5/16' 3/8' 4/5' 1' 1-3/8' 1-1/2' 2' 2-1/2' (6 8 10 20 25 35 38 50 65mm) Vacuum Brazed Diamond Hole Saw with 5/8-11 Thread

  • ✔Size Diamond drill bit--1/4" 5/16" 3/8" 4/5" 1" 1-3/8" 1-1/2" 2" 2-1/2" (6 8 10 20 25 35 38 50 65mm), diamond height 10mm, total length 60mm, 5/8-11 thread.
  • ✔Size Diamond blade:5 inch (125mm),diamond height 10mm ,segment thickness 1.2mm ,Arbor 7/8"(22.23mm) , wet or dry cutting.
  • ✔Wide Application of drill bit --Worked great for porcelain tile, ceramics, bathroom tile,marble granite,stone,masonry, brick with ease,Using water could prolong the lifetime.
  • ✔Wide Application of blade --A blade engineered for extremely smooth cutting of porcelain tile, ceramic tile, marble, granite,masonry and other natural stone.
Check Stock

GoYonder 7 Inch Diamond Saw Blade,Super Thin Diamond Saw Blade for Cutting Ceramic Porcelain Tile Granite Marble Suitable for Angle Grinders with 7/8\ or 5/8\ Arbor

  • Thickness：1.2 mm, Outer Diameter: 180 mm /7 inch.
  • With reducer washer suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor..
  • ✅ X teeth rim design not only provides faster cutting but also ensures a longer service life..
  • ✅ Super thin porcelain blade with free chips for precision cutting, avoid waste of material. Universal for DRY or WET CUTTING..
  • ✅ GoYonder diamond saw blades are designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, and cement backer board..
  • ✅ Warm Prompt: For your personal protection, before you start working we recommend that you wear safety glasses, dust aspirators, welding gloves, safety shoes, and other appropriate equipment.（Take good care of your eyes/ears/face/hands/body/etc）.
Check Stock

(2 Pack) 5\ Super Thin Diamond Saw Blade Porcelain Tile Blade Dry or Wet Cutting for Granite Marble Porcelain Tile …

  • Porcelain blade cuts cool with increased life and cutting speed..
  • Available for cutting porcelain tile,ceramic tile, granite,marble,sandstone quartz ect.
Check Stock

GoYonder 4.5 Inch Super Thin Diamond Saw Blade for Cutting Porcelain Tiles,Granite Marble Ceramics (4.5\)

  • Super thin porcelain saw blade with free chips for cutting,Match with hand-held machine.
  • Available for cutting porcelain,ceramic tile,granite, sandstone quartz ect. Cpsia Warning.
  • Size:115 x 10 x 1.2 x 22.23 mm,Thickness:1.2mm,Outer Diameter:115mm /4.5 inch.Suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor..
Check Stock

Ceramic Ladle Pure White Soup Spoon Bone China Big Ladle Spoons Heavy Duty Deep Porcelain Flatware Asian Soup Tureen Spoons10 inch Long

  • Best service - Ceramic goods are easily broken ,no matter how we protect the parcel .So any problem ,please feel free to contact us .we will reply in 24 hours .If you got a broken one ,we will reship you a new one as soon as you contact us.
  • They are fresh, light and comfortable. Porcelain is fine, smooth, oil-free, stylish and elegant, without losing texture.
  • Material: New bone china/ceramic/porcelain bone China, made of high quality porcelain, high temperature firing, smooth porcelain surface, full color pattern.
  • Spoon length: 270 mm and spoon width: 75 mm and color: pure white. Hand-painted glazed patterns add elegance and taste to your kitchen and home..
  • These large porcelain spoons can be used in different situations, such as homes, hotels or restaurants. When you use them to make soups, rice, porridge, cereals, appetizers, glutinous rice, water, reclining Buddha, udon noodles, ramen noodles, etc.
Check Stock

6 PCS Diamond Core Drill Bits Set Tile Hole Saws 1/4” to 1-1/2” for Granite Quartz Porcelain Tile Marble with 3/8” Hex Shank Adapter Fit Angle Grinders & Drills, 6 8 10 32 35 38mm

  • ... 6 different sizes 1/4”, 5/16”, 3/8”, 1-1/4”, 1-3/8” and 1-1/2” Diameter (6mm 8mm 10mm 32mm 35mm 38mm) and a 3/8” Hex Shank Adapter in a convenient carrying case.
  • Tough and Durable - Vacuum Brazed Diamond Hole Saws ideal for Dry/wet drilling in Granite Quartz Porcelain Tile, Marble, Stone countertops, Masonry, Brick and more hard materials.
  • Work with Both Angle Grinders and Electric Drills - All the bits built with 5/8"-11 Female Thread compatible with most popular brand Angle grinders. A 3/8” Hex Shank Adapter also included to fit them on electric drills or other machines.
  • Professional Finish and Threading – 6 sizes diamond hole saws are the best for cutting the perfect size holes through cement board, granite and porcelain tiles for faucet mount, garbage disposal button, soap dispenser, filtered water and other projects.
  • How to cut perfect holes? - Start at an angle, around 45 degrees, cut at a low to medium rpm, cool the cutting area with water, use a sponge to control the amount of water.
  • wash the bits right after to avoid building up with material. Pleas....
Check Stock