Reviews 10lb Winches

Champion Power Equipment 18030 Neoprene Winch Cover for Winches 2000-3500 lb.

  • Fits 2, 000 lb. to 3, 000 lb. Champion winches.
  • Specifically designed to fit Champion winches.
Check Stock

DC Cargo Mall Combination Winch Bars Square Head | Carbon-Steel Construction and Non-Slip Handle | for Winches on Flatbeds and Trucks | 2-Pack

  • HEAVY: 6.6 lb. carbon-steel construction makes the winch bar a strong and reliable flatbed tool. Fits standard winches..
  • EASY: 40.5 inch length provides maximum leverage. Non-slip handle has ridged surfaces to provide a firm grip..
  • Combination winch bar has a square head and knurled non-slip handle for releasing tension on winches/load binders. Chrome finish..
  • VERSATILE: Combination bar can be used for winches AND load binders. Tapered, angled end easily tightens and releases winches. Square head helps tighten and release chain load binders..
Check Stock

Extreme Max 5600.3093 Snatch Block w/o Hook

  • Correct use of a snatch block can double pulling power.
  • Fits 3/16" cable (size typically found on 2500-3600 lb. winches).
  • Works with all ATV winches, designed for semi-permanent installation.
  • Use angled pulls with your winch to get more power with less heat build-up and amp draw.
Check Stock

MaySpare 12V Winch Rocker Thumb Switch with Mounting Bracket for ATV UTV Handlebar Control Line Kit

  • Handle Bar mounted Mini Rocker Switch with Standard Bullet Connectors for use.
  • Control Wire Length: Approximately 10 ft..
  • Apply in 1,500lb-6,000lb ATV/UTV/SxS winches..
  • Package including: Rocker Switch, Wiring, Mounting Hardware.
  • 【LIFETIME WARRANTY】100% high quality & oem Match, direct replacement,6 Month Warranty.
Check Stock

Die-matic Short Nose Adjustable Winch Stand W/ 1400lb Dutton- Lainson Winch (Galvanized)

  • Size- Width 2" Length: 20', Rated Capacity: 4500 lb.Perfect for winch strap replacement..
  • High quality- using high-quality industrial webbing, reinforced hooks, after thousands of tests before leaving the factory, it can be used more safely..
  • You can use it to easily put the boat on the trailer, tilt the boat slightly, and then drag the car. The standard 2 inch width is suitable for most winches, and can be used for manual winches and electric winches. It is ideal for a 20-ft bass boat..
  • Durable-It uses ultra-strong polyester and metals.Corrosion resistance: seawater corrosion resistance and rust resistance..
  • Rust-proof- High-quality hooks can easily tow the boat, allowing you to use it safely..
Check Stock

SuperATV Heavy Duty Winch Mounting Plate for 2021+ Polaris RZR Trail 900 / S 900 / S 1000 | 3/16\ Steel Plating | UV-Resistant Powder Coating | Compatible With Many OEM and Aftermarket Winches!

  • ✔️【 Fits】2021+ Polaris RZR Trail 900 / Trail S 900 / Trail S 1000 | Designed to work with SuperATV’s Black Ops Winches | Please Note: This Polaris Winch Mount has dual mounting bolt patterns for the majority of aftermarket 3500–6000 lb. winches..
  • 【Machine Specific Mounting Plate】Made with 3/16” heavy-duty steel plating | UV-Resistant wrinkle black powder coating prevents corrosion | Mounting Holes: 3” x 6 5/8” (76mm x 169mm) 3” x 4 7/8” (76mm x 124mm) | Fairlead Bolt Pattern: 5.98” (152mm) 4.29” (109mm) | Strength you can count on!.
  • 【Strong and Dependable】Do you need the best Polaris RZR Winch Mount in the industry? SuperATV's is laser cut, brake press bent, and powder coated to ensure years of use. And it’s not just ultra strong—it’s also super simple to install. We include everything you need to have it on your machine in no time..
  • 【Winch Out With Ease】Both at work and at play, you don’t hold back on your Polaris RZR Trail! SuperATV’s RZR Winch Plate ....
Check Stock

ZEAK Cradle Winch Recovery Mounting Plate, 10'' × 4-1/2‘’ Universal fit Winch Mounting Plate, 15000 lb. Capacity

  • ZEAK cradle winch mounting plate own an Anti-rust powder coat finish,a durable black powder coating, which can be guaranteed not to rust easily and easy to clean..
  • Suitable for trucks, trailers and any other 4WD vehicles..
  • Standard 10’’x4-1/2’’ winch mount pattern,it’s easy for everyone to install this cradle winch.
  • The Zeak cradle winch mounting made of heavy duty steel ,durable construction.It is suitable for 8000lb to 15000lb winches,be tailor for 4WD competiton.
  • ZEAK products provide lifetime technical support.If you have any problem please contact us at any time..
Check Stock

micrl 10 Pcs 8 Gauge 50A Battery Quick Connect/Disconnect, Jumper Cable Plug Connector Kit for Recovery Winch, Towing Systems(Grey)

  • Provides a safe and simple power source for portable winches and booster cables.
  • Power connections can be added to the front, rear or both ends of the vehicle.
Check Stock

12V Winch Rocker Thumb Switch Control Line with Mounting Handlebar for ATV UTV Handlebar Control Line Kit

  • ①Winch Rocker Switch Control Line for ATV/UTV.
  • ②Handle Bar mounted Mini Rocker Switch with Standard Bullet Connectors for Use with 1,500lb-6,000lb ATV/UTV/SxS Winches.
  • ③12V Industry ATV/UTV contactor/solenoid/relay requires auxiliary power and two control wires. Splicing of wires may be required depending on the connectors found on the customer's current contactor/solenoid.
  • ④Low Temperature Resistance of PVC Casing and the Line of Control.
  • Waterproof/weatherproof switch works with any standard.
  • ⑤●Wires into the Contactor/Solenoid, Including Rocker Switch, Wiring, Mounting Hardware.
  • ●Control Wire Length: Approximately 10ft / 3m.
Check Stock

Rough Country 2' Receiver Hitch | Winch Plate Cradle | 1/4' Steel | Handles | 4.5x10 Bolt Pattern | RS109 , Black

  • Heavy Duty 1/4" Steel | 1" OD Solid Handles..
  • Fits up to 12,000 LB Winches | 4.5x10" Bolt Pattern..
Check Stock

Champion Mini-Rocker Switch Winch Remote Control Kit for 5000-lb or Less ATV/UTV Winches

  • Weather Resistant – Low profile, weather-resistant design.
  • Quick-Connect – Includes a Quick-Connect solenoid with an on/off switch to preserve your battery from unnecessary use.
  • Ergonomic – The adjustable handlebar bracket and mounting hardware allow for comfortable, ergonomic operation.
  • Versatile – Use this mini-rocker with 5000-lb. or less Champion ATV/UTV winches or other 12-volt DC winches of the same size.
Check Stock

Stark USA Universal Portable Foldable Trailer ATV Hitch Winch Mount/Cradle w/Hitch Receiver 2\ Winch Mount Recovery Winches (10\ x 4-1/2\), Black (25084)

  • Large Carrying Capacity - Perfect for 8000 lb to 13000 lb Winches, solid steel construction with one-piece fully welded design for extra strength.
  • Heavy Duty Steel Construction - Our winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan.
  • Carrying Handle Design for Easy Portability - Includes (2) convenient carrying handles to easily allow you to move your winch on and off your vehicle..
  • Easy Installation - Our portable winch hitch receiver mount allows you to easily mount your winch to any standard 2” x 2” receiver.
  • Package Include - Mounting rack package includes pin and clip, as well as 10" upper center guide bolt pattern and 10" x 4-1/2" standard winch mounting pattern, everyone can easily install this cradle winch.
Check Stock

WATERWICH 12V 250A Winch Solenoid Relay Contactor+2pcs Wireless Winch Remote Control Kit with 6 Protecting caps Universal for Truck Jeep ATV SUV 2000-5000lbs Winch

  • 1.Made of solid and weather resistant steel and powder coated black surface for great durability.This winch solenoid contactor replacement come with shatterproof sealed and corrosion resistant case..
  • 2.It is designed to handle intermittent current loads of 250 amps for up to 10 seconds, requiring a 20-30 second cooling time between cycles,Wireless remote control kit 12V for winches up to 2000-5000lb.Easy to install and use, portable..
  • 3.Built-in antenna design,Remote range up to about 164ft(50m).Visual indicator light shows remote operation.Allows operator to keep clear of dangerous rigging.Operator can monitor winching or lifting from different positions..
  • 4.Weather-resistant receiver WATERPROOF design,Waterproof casing will protect the receiver from rain or coffee spill,Submerged in water operation is NOT recommended..
  • 5.12V 250A Winch Solenoid Relay Contactor for all 12Vsolenoid winches,including ATV's,UTV's,SUV's,Jeep's,4x4 vehicles, and 12V Trailer ect..
Check Stock