Reviews 10in Electronic Project Kit

WHDTS 4-Digit Digital Clock Kits with PCB for Soldering Practice Learning Electronics with English Instructions

  • ⏰【Great School Science Project】: The DIY Clock Kits are used to installed to a 4-Digit Digital Electronic Clock. It is widely used in schools to help students learn basic mechanical and electronic skills. It's a great Science Fair project. Highly recommended to practice soldering skills enjoyably for you and your kids..
  • ⏰【Easy Assembly】: In addition to teaching basic mechanical and electronic principles, the clock kit is easy to build and is so simple. The connection that was clearly mapped and labeled on the board makes it easy to assemble. It's often used to teach basic soldering skills. It's a great first kit for any STEM student. No programming is required..
  • ⏰【Comprehensive Time Functions in Most Electronic Clocks】: Seconds Correction Function. Could switch to display the seconds or minutes interface independently. Accurate Travel Time--the error range ±1 sec every 24 hours. Hourly Chime Function--it supports hourly chime from 8:00 to 20:00 (The function can be turned on or off.). Two-way Alarm Clock--supports twice alarm clock setting. Power Cut Memory Function--the time is still accurate once power-on from power-off..
  • ⏰【Parameters】: This Electronic Clock Kit is equipped with STC11F02E master chip. DC5.5*2.1 power port with....
Check Stock

DIY Bluetooth Speaker Box Kit Portable Electronic Sound Amplifier Soldering Project DIY Kits with LED Home Stereo Speakers School Education Science Experiment and STEM Learning for Teens,Kids Adults

  • 【Bluetooth-compatible Amplifier DIY Kit】: The Soldering Project DIY Kits are used to installed to an electronic transparent stereo speaker with high-power speakers, LED flashing lights and transparent Acrylic shell. This Electronic DIY kit help you to learn basic electronic knowledge and circuit principles, and practice soldering skills enjoyably for you and your kids, or students, or DIYers..
  • 【Great Electronic Soldering Project】: Great project kit for soldering practice and also suitable for family education. Not only to improve your soldering skills, you will also will be more familiar with electronic components and learn more interesting electronics things. But please note,this soldering kit requires certain foundation of basic electronic theoretical knowledge and welding and hands-on ability..
  • 【Easy To Install】:The bluetooth module board is soldered and can be used directly after connection. You only need to solder the Led flashing light kit, connect the wires, and assemble the shell. Fun and entertaining, build your own bluetooth speaker by yourself, a cool project and challenging enough to be fun. About power: 5V mobile phone charger or computer power supply can be used, the sound quality will be better when the current of the power s....
Check Stock

GeekLJT Bluetooth-Compatible Speaker Electronic Kit, Small Rechargeable Speaker Soldering Project Kits with Colorful LED Lights, Solder Kit for Learning and Teaching Electronic

  • 【Electronic Solder Kit】 The finished product of the electronic solder kit is a cool mini bluetooth-compatible speaker with excellent voice quality, clear acrylic housing and colorful LED lights which can dance with the music. Excellent gift for electronics hobbyists, DIYers and students..
  • 【Portable Wireless Speaker】 The small home stereo sound amplifier is powered by 2pcs 14500 batteries(not included), can be charged by contained charging cable. Portable size, you can take it to anywhere to enjoy music. 5 colorful LED lights flash with music, cool light effect. And the voice quality is excellent with one 4ohm 3W speaker..
  • 【Great Electronic Educational Project】 This diy soldering kit is simple in principle,easy to get a sense of accomplishment and be able to exercise hands-on skills. We will provide detailed instructions. Great educational electronics kit for family and school education. Note: The kit requires less soldering parts, only the light board needs to be soldered, and more parts need to connect the wire and assembly..
  • 【Excellent Gift Choice】 The solder project kit is a great gift choice for st....
Check Stock

Antrader Breadboard Jumper Wires 40 Pin 10CM Female to Female for Raspberry Pi

  • Package: 1 piece of the 10cm 40pin female to female multicolored jumper wires cables..
  • Jumper wire length: 10cm/3.94 inch(F/ F).
  • Connectors: 40pin female to female header.
  • Compatible with 2.54mm spacing pin headers..
  • Made of high-grade copper wire material, safe and durable to use..
  • The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers..
  • Can be used for electronic project, genuine breadboard kit project, PCB project, PC motherboard, etc..
Check Stock

MiOYOOW DIY Ḅḷueṭooṭḥ-Compatible Speaker Kit with LED Flashing Light Soldering Project USB Mini Home Stereo Sound Amplifier DIY Electronic Kits for Soldering Practice School Education

  • 【Ḅḷueṭooṭḥ-compatible Amplifier DIY Kit】: The Soldering Project DIY Kits are used to installed to an electronic transparent stereo speaker with high-power speakers, colorful LED flashing lights and transparent Acrylic shell. Fun and entertaining, build your own bluetooth speaker by yourself, a cool project and challenging enough to be fun..
  • 【Great Electronic Soldering Project】: Great project kit for soldering practice and also suitable for family education. Not only to improve your soldering skills, you will also will be more familiar with electronic components and learn more interesting electronics things. But please note,this soldering kit requires certain foundation of basic electronic theoretical knowledge and welding and hands-on ability..
  • 【Easy Installation】:The bluetooth module board is soldered and can be used directly after connection. You only need to solder the Led flashing light kit, connect the wires, and assemble the shell. About power: 5V mobile phone charger or computer power supply can be used, the sound quality will be better when the current of the power supply is 2A..
Check Stock

Gikfun Bluetooth Speaker Kit with LED Flashing Light Soldering Practice Mini USB Stereo Sound Amplifier DIY Kit for School Learning Project EK1979

  • The Soldering Project DIY Kits are used to installed to an electronic transparent stereo speaker with high-power speakers, colorful LED flashing lights and transparent Acrylic shell..
  • This is a beautiful speaker that is fun to build and nice to look at when finished, it is not only a practicing kit, but also a decorative gift for you. Build your own bluetooth speaker by yourself, a cool project and challenging enough to be fun..
  • The bluetooth module board is soldered and can be used directly after connection. You only need to solder the Led flashing light kit, connect the wires, and assemble the shell. About power: 5V mobile phone charger or computer power supply can be used, the sound quality will be better when the current of the power supply is 2A..
  • Two 3W 4ohm Speakers. Colorful LED voice control flashing lights, cool lighting effects. Support power off memory, support U disk or Ḅḷueṭooṭḥ to play music. Two control methods, Ḅḷueṭooṭḥ connection or infrared remote control..
  • Great project kit for soldering practice and also suitable for family education. Not o....
Check Stock

MiOYOOW Soldering Practice Kit LED Desk Lamp with Adjustable Brightness, DIY Electronic Soldering Project Kits Rechargeable Gooseneck Table Light for Learning Soldering or Daily Use

  • 【LED Table Lamp DIY Kit】The practical soldering kit are used to installed to a LED desk light. This soldering DIY kit help you to learn basic electronic knowledge and improve soldering ability, at the same time, you will own a LED desk lamp which has adjustable brightness, flexible gooseneck and can also be as mobile phone holder. A good choice for reading, studying and daily use. What could be more surprising than this Christmas present?.
  • 【Easy Assembly】: In addition to teaching basic mechanical and electronic principles, the table lamp soldering practice kit is easy to build and the principle is simple. The connection that was clearly mapped and labeled on the board. The solder practice kits are suitable for DIY electronics enthusiasts and can be used as school education practice kits. But please note, this soldering kit requires certain foundation of basic electronic theoretical knowledge and welding and hands-on ability..
  • 【Functions & Features】: This diy LED desk light bright enough at night. The brightness can be adjusted, equipped with flexible gooseneck, the desktop lamps enable you to have your light pointed in any direction. At the same time, you can also us it as a mobile phone holder. Built-in rechargeable battery, you can maneuv....
Check Stock

MiOYOOW DIY Ḅḷueṭooṭḥ Speaker Kit with FṂ Radio, Soldering Practice Kit 2 Channel Rechargeable Mini Home Stereo Sound Amplifier with LED Flashing Light, Soldering Project Kit for Learning Electronics

  • ...press and hold the Play/Pause button for 3 seconds, the crystal radio kit will automatically search and store FṂ stations (Frequency: 87-108MHz). Equipped with a detachable 75cm FṂ antenna, can strengthen the FṂ signal in somewhere with weak reception..
  • 【Great Electronic Soldering Project】: The DIY Kit are used to installed to an electronic stereo speaker with fṃ receiver, 2 Speakers, 10 LED flashing lights and transparent Acrylic shell. Ḅḷueṭooṭḥ Operation: Turn on the Ḅḷueṭooṭḥ of the mobile phone, find "ZX0089BT" and click connect. It also supports TF memory card or U disk to play music. After disconnecting Ḅḷueṭooṭḥ, it will automatically switch to TF card or U disk mode..
  • 【Experience Freedom of Outdoor Entertainment】: The radio soldering kit is equipped with rechargeable battery box for offline outdoor use(Battery Not Included). Tune in to your favorite stations and create lasting memories, wherever your journey takes you. Two high fidelity 3W 4ohm Speakers and Colorful LED voice control flashing lights are the extra bonus!.
Check Stock

Hexidos 8x8x8 LED Cube Kit DIY Electronic Kit Soldering Project Kit User Needs to Solder The LED and The Displayed Content Can Be Modified MULTI4

  • [Great Science Kit] It's a 8x8x8 LED CUBE diy Electronic Kit, a great science kit, soldering project kit. Children will love it and stay away from....
  • [Gorgeous Display Effect] Buyers can solder it by themselves according to the installation instructions provided by us, and then plug in the 5V 1A USB....
  • [Structure] Its motherboard is soldered and tested. Buyers only need to solder 512 LEDs by themselves. The size after soldering is 18x18x21cm. There....
  • [Program modification] The motherboard has downloaded the program, and the user can run it after welding. Users can also modify the program by....
  • [Perfect After-Sale Service] This is DIY kits, not the end product! The Soldering Project requires basic electronic knowledge and hands-on ability.....
Check Stock

Yahboom Breadboard Dupont Wire Multicolored Jumper Wires 40pin M-F, 40pin M-M, 40pin F-F, 3PCS 830 Point Solderless Prototype PCB Board for Arduino Raspberry Pi Electronic Project

  • 【Pure Copper Breadboard Jumper Wires】40 colored 1 row, 40 composed of 10 colors, can be disassembled for use, PVC material, high temperature resistant wire, more safe and durable.The two ends of the wire are designed with quick wiring ports, which can be used for circuit quickly without soldering..
  • 【120pcs 3 Types M-F M-M F-F】Separable multicolored (10 colors) softness ribbon cables, Each cable length: about 20cm /8-inch.
  • 【3PCS Spliceable Breadboards Kit 830 Point】165×55×10mm,630+200=830 holes，1 terminal strip: 630 jacks，2 distribution strips: 200 jacks，Matching jumper, wire diameter 0.8mm.
  • 【MB-102 ABS Recyclable Experimental Connection Board】White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips.With Self-Adhesive Tape on the Back, Easy to Stick on the Arduino Prototype Shield..
  • 【Application】Good for A-rduino Breadboard Jumper Wires kit Project and other Electrical DIY kits.DIY experiment / Electronic projects / Breadboard / PC motherboard / PCB project.
Check Stock

ELECROW Sensor Kit for Raspberry Pi, Electronics and Programming Kit for Raspberry Pi Beginners

  • Raspberry Pi Starter Kit ---- These sensor kits for Raspberry Pi will be one of the best kits for you to get started with Raspberry Pi and Python!.
  • Compatible models ---- Crowtail-Starter Kit can be used with raspberry pi 4, 3B, 3B+, even Pi zero. (Raspberry Pi NOT included).
  • Detailed Tutorials ---- Electronic kit provides rich, interesting and open-minded courses, so that you can not only learn hardware and programming knowledge but also can distribute your thinking and guide you to think further..
  • Fun Modules ---- Crowtail Raspberry Pi sensor kit includes a Crowtail-Base Shield for Raspberry Pi and more than 22 modules which can be used for your creative Raspberry Pi projects..
  • Crowtail ---- Crowtail is composed of a series of open source electronic sensor modules. Each electronic module is composed of a circuit board with integrated sensors and a standard 4pin connection terminal. It can be used without breadboards and other complicated operations. It is convenient and quick to build a project..
Check Stock

Dingdong Store DIY Electronic Clock kit 4 Digital Tube Multicolor LED time Week Temperature Date Display with Clear case Cover DIY sodering Project (Blue)

  • Reminder Before Soldering: This product is a soldering practice kit, and it need soldered by yourself. Please check all the components according the packing list before soldering..
  • The Clock Comes with English Instruction: If you have any questions about the product or need soldering steps instruction with picture, please feel free to contact us..
  • Multifunctional: The clock can be set to display time, temperature, date, week and alarm..
  • High Precision: The clock uses high-precision crystal oscillator, smart chip and with time correction function, all this make the clock with a more accurate precision..
  • Great Soldering Project Kit: The DIY Clock Kits are used to installed to a 4-Digit Digital Electronic Clock. It is widely used in schools to help students learn basic mechanical and electronic skills. It's a great Science Fair project..
Check Stock

KOOKYE Robot Tank Car Kit Tank Chassis Platform Metal Stainless Steel 2DW Motor for Arduino / Raspberry Pi DIY (Silver Tank Chassis)

  • The KOOKYE robot tank platform is designed for learning robotics electronic car with arduino or raspberry pi programming. You can add robotic arm or robotics HD Camera on this robotic car platform for DIY..
  • The robotic tank car chassis contain extra-large size stainless steel car body and a variety of subplates for DIY. With 1 pairs drving wheels and 5 pairs carrying wheels, it make walk more easily on complex ground conditions..
  • This product only contains tank chassis.If you are an intermediate player and have time to read our code comments,you can buy the robotic car chassis platform andour tank electronic parts kit,then you can easily customize this robotic tank car to make your own project for science fair, college home work or even commercial applications..
  • The tank car chassis kit and the electronic parts kit can be purchase separately for your DIY.The electronic parts kit contains module parts including: Ultrasonic Sensor module, Tracking module, Infrared Remote Control, Bluetooth module and WiFi Expansion board etc. With these modules, the robot car can work in multiple modes such as auto-go, infrared control, obstacle avoidance, line tracking. You can use our Android APP to change working mode through Wifi or Bluetooth..
Check Stock