Reviews 10gbps Receiver Module

Taidacent 12V 2A High Power 8mm to 18mm Wireless Charging Mat Module DIY Inductive Modules Wireless Charger Module Power Supply Kit Receiver and Transmitter Offering Technical Support

  • The charging module is an 80mm DC remote module, and the circuit is simple and practical..
  • Transmitting coil: inner diameter 70mm outer diameter 88mm thickness 1.3mm.
Check Stock

SFP+10GBASE-T Transceiver Copper RJ45 10Gbe SFP Module Compatible for Cisco SFP-10G-T-S, Meraki MA-SFP-10G-T, MikroTik, Unifi, Netgear, QNAP, Supermicro, Cat6a/ Cat7, 30m

  • [Data Rate] 10G, multi-rate (The switch optical port must be support 10G, the optical port on the other switch end can support multi rate). 10G SFP+ to RJ45 Copper module for CAT6A/7/8 cable, copper RJ-45 connector. Supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.).
  • [Wide Compatibility] Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Netgear AXM765, D-L ink DEM-440XT, Mikrotik, Supermicro, and Other Open Switches..
  • [Easy to Use] Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
  • [High Quality] All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch..
  • [After-sales Service] 30-day free return, 3-year warranty, lifetime technology support. QSFPTEK is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to conta....
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...otor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

REC S550 DIY Hexacopter Drone Development kit (Value Pack)

  • - Integrated backup power supply and failure backup controller.
  • redundant power input and fault transfer function.
  • RadioLink AT10 2.4Ghz 10CH RC Transmitter with R10D Receiver PRM-01 Voltage Return Module: Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model.   3.5 inch colorful screen 320×480 resolution,clear display menu and graphs.   Expansion feedback module,users can get plane details in real time.   Make very setting clear and exactly output result..
  • RadioLink AT10 2.4Ghz 10CH RC Transmitter with R10D Receiver PRM-01 Voltage Return Module: Great control distance: 1.1km on the ground, 2km in the sky.   Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it.  High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.   Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology..
  • Pls note: Support Max 3-4S battery (Optional, only included in ARF Version).
Check Stock

Acxico 2Sets Laser Sensor Module For Arduino AVR(KY-008 Laser Transmitter +Laser Receiver Sensor Module Non-modulator Tube)

  • Model: 1*Laser Receiver Sensor Module+ 1* KY-008 Laser Transmitter Module.
  • Laser Receiver Sensor Module uses the non modulated laser receiver, please use in the room where without the light, the sunlight or other lamps and lanterns will interfere, suggested in the dark environment use..
Check Stock

DISH MT2 OTA MODULE [Electronics]

  • An MT2 Over-the-Air (OTA) Module to connect your over-the-air (OTA) antenna directly to your ViP222k or ViP722k DVR satellite receiver.
  • View local, digital, over-the-air channels directly through your satellite receiver by integrating the OTA channels into your Program Guide..
  • An OTA antenna must be installed to use the Module..
  • A satellite signal and a DISH Network programming subscription is required to operate the OTA module..
Check Stock

StarTech.com 10G PCIe SFP+ Card - Single SFP+ Port Network Adapter - Open SFP+ for MSA-Compliant Modules/Direct-Attach Cables - 10 Gigabit Fiber PCIe NIC - PCI Express SFP+ Network Card (PEX10GSFP)

  • MAXIMUM THROUGHPUT: Increase your bandwidth up to 10 Gbps with this SFP card for enhanced data transfer rate using fiber optic cable.
  • Reduce wait times for large file transfers, content sharing, network storage, or any other high bandwidth application.
  • WIDE COMPATIBILITY: This PCIe network card has an open SFP+ slot that can accept any MSA-compliant module or direct attach cable (DAC). It opens the possibility to use multimode, single-mode, or even copper SFP+ module.
  • SECURE INTERFACE: For security and privacy reasons a fiber network card is the ideal point-to-point network adapter.
  • Eliminate EMI with a fiber connection and cover longer distances with fiber to host.
  • SPECIFICATIONS: 10Gbps open slot SFP+ port | MMF, SMF, and Copper Support | 9K Jumbo Frames | IEEE 802.3ad Link Aggregation | IEEE 802.1Q VLAN tagging | PCIe 3.0 x4 | MSA Compliant | Full Duplex | Low Profile Bracket included | Windows, macOS and Linux.
Check Stock

Bose Lifestyle 600 Home Entertainment System, works with Alexa - White

  • Jewel cube satellite speakers are sleek and compact, and create dynamic surround sound.
  • Dimensions (”): Console – 15.98 W x 2.56 H x 10.16 D | Jewel Side speakers (each) – 2.6 W x 6.2 H x 2.6 L | Jewel Center speaker – 6.1 W x 2.7 H x 2.6 L | Bass module – 12 W x 12 H x 12 L.
  • As main components, your purchase include: One Console, 4 OnmiJewel side speakers, One OmniJewel center speaker, One Acoustimass wireless bass module, universal remote control, 2 wireless receivers, One ADAPTiQ headset and Owner’s guide.
  • Front and center speakers have a wired connection, while the 2-rear speakers connect to a wireless receiver and AC power mains. The rear speakers and bass module connect to the front module wirelessly.
  • Supported Audio formats – Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, Multichannel PCM. Video Source compatibility – Support for six 4K/60 video sources (HDMI 2.0/HDCP 2.2).
Check Stock

AudioQuest Chocolate HDMI Cable - 5m

  • In addition to all 19 HDMI conductors being Direction-Controlled to reduce RF Noise, AudioQuest Cinnamon 48 HDMI cables feature a metal-layer shield around the 4 FRL + eARC pairs to further enhance noise-dissipation..
  • The Audio Return Channel sends audio from the TV to a soundbar, receiver, or ARC input. “enhanced” eARC is easier to use and enables lossless multi-channel. In AudioQuest Cinnamon 48 HDMI cables, the eARC conductor pair is internally controlled for direction to ensure superior audio performance..
  • AudioQuest Cinnamon 48 HDMI cables use Direction-Controlled conductors to minimize RF noise. For optimal Noise-Dissipation and superior audio performance, use Cinnamon 48 HDMI cables with the plug's arrows pointing towards the TV, or Source towards A/V receiver..
Check Stock

Nillkin Wireless ipad Charger Tablet Stand - 2 in 1 ipad Holder Charging Dock, Wireless Charging Stand for iPad Pro 12.9/iPad Pro 11, ipad 8/7/6/5 Gen, Air 4/3, Mini 4 3 2, Samsung Tab S7/S6/S5e

  • 【ATTENTION:Need to buy extra Qi receiver】- Note: The Tablet don’t support wirelress charging function, such us ipad,Samsung Tablet. Please use with wireless charging receiver(NOT include). So you need to buy extra Qi wilreless charger receiver for charging..
  • 【2 in 1 Tablet Stand Wilreless Charger】- 2 in 1 Tablet ipad Holder Dock Wireless Charging Stand. Easy to adjust,Supporting wireless charging when working,playing game,reading and watching videos.Supporting both vertical and Horizontal charging and viewing. Experience your ipad in a whole new way..
  • 【Fast charger】-The wireless charging stand supports fast charging, But it need to be used with QC3.0 adapter or PD adapter(NOT include)..
  • 【Adjustable tablet stand】- You can adjustable the angles depending on your needs. And the position of the wireless charging module can be adjusted, Compatible with tablets of different sizes, Such as iPad Pro 12.9 2020/2018,iPad Pro 11 2020/2018, ipad pro 10.5,ipad 8th/7th/6th/5th/4/3/ generation,ipad Air 4 3 2,ipad Mini 5th/4/3/2, Samsung Tab S7 Plus/S7S6/S5e/S4..
  • 【Detachable design】- Stand and wireless charger can be used separately.The wireless charger module can charging for your phone alone(like Samsung S21 Ultra/S21/S20 Ultra/S20+/S10/S9, Note ....
Check Stock

QWinOut ARF/PNP Full Set Hexacopter DIY Drone Kit Tarot 690mm Frame with 750KV Motor GPS PIX 2.4.8 32 Bit Flight Controller (ARF)

  • – Integrated backup power supply and failure backup controller.
  • redundant power input and fault transfer function.
  • RadioLink AT10 2.4Ghz 10CH RC Transmitter with R10D Receiver PRM-01 Voltage Return Module: Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model.   3.5 inch colorful screen 320×480 resolution,clear display menu and graphs.   Expansion feedback module,users can get plane details in real time.   Make very setting clear and exactly output result..
  • RadioLink AT10 2.4Ghz 10CH RC Transmitter with R10D Receiver PRM-01 Voltage Return Module: Great control distance: 1.1km on the ground, 2km in the sky.   Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it.  High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.   Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology..
  • Pls note: Support Max 3-4S battery (Optional, only included in ARF Version).
Check Stock

QWinOut DIY F450 450mm Airframe 2.4G 6CH RC Quadcopter ARF Combo Full Set Drone with GPS APM2.8 Flight Controller (All Parts Included for Ready to Fly, Unassembly)

  • - Integrated backup power supply and failure backup controller.
  • redundant power input and fault transfer function.
  • RadioLink AT10 2.4Ghz 10CH RC Transmitter with R10D Receiver PRM-01 Voltage Return Module: Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model.   3.5 inch colorful screen 320×480 resolution,clear display menu and graphs.   Expansion feedback module,users can get plane details in real time.   Make very setting clear and exactly output result..
  • RadioLink AT10 2.4Ghz 10CH RC Transmitter with R10D Receiver PRM-01 Voltage Return Module: Great control distance: 1.1km on the ground, 2km in the sky.   Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it.  High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.   Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology..
  • Pls note: Support Max 3-4S battery (Optional, only included in ARF Version).
Check Stock

Bose Lifestyle 650 Home Entertainment System works with Alexa - Black

  • As main components, your purchase include: One Console, 4 OnmiJewel side speakers, One Omni Jewel center speaker, One Acoustimass wireless bass module, universal remote control, 2 wireless receivers, One ADAPTiQ headset and Owner’s guide.
  • Dimensions (”): Console – 15.98 W x 2.56 H x 10.16 D | Omni Jewel Side speakers (each) – 1.84 W x 5.77 H x 1.84 D | Omni Jewel Center speaker – 21.34 W x 1.9 H x 1.84 D | Bass module – 11.61 W x 12.8 H x 11.61 D | Wireless receivers – 6.54 W x 1.6 H x 3 D.
  • Wires length: 6-foot IR emitter, 5-foot optical cable, 6-foot HDMI cable, 5-foot power cord, 20-foot center speaker cable, 20-foot wireless surround speaker cable, and 20-foot front speaker cables.
  • Front and center speakers have a wired connection, while the 2-rear speakers connect to a wireless receiver and AC power mains. The rear speakers and bass module connect to the front module wirelessly.
  • Supported Audio formats - Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, Multichannel PCM. Video Source compatibility - Support for six 4K/60 video sources (HDMI 2.0/HDCP 2.2).
Check Stock