Reviews 100mm Ducting Pipe

60mm Car Air Heater Ducting Pipe Outlet 20.1577.89.06.00, 201577890600, 398551, 398.551 Fit for Eberspacher, for Webasto, for Propex and Other Blown Air Heater Systems garnack ac car vents

  • [Fitment]Car Air Heater Ducting Pipe Outlet suitable for Eberspacher, for Webasto, for Propex and other blown air heater systems.(The compatibility for reference.).
  • [Easy to Install]Car Warm Air Outlet suitable for 60mm warm air ducting.No drilling or cutting required, front fascia is removable to enable access to screw holes for correct fitment..
  • [Custom Service]Your satisfaction is our utmost concern,please check the applicable model you need before purchasing our products. If you have any questions about the product size, please feel free to email us. Our customer service will try our best to give you a satisfactory answer within 24 hours..
  • [OP Number]Other Part Number : 20.1577.89.06.00, 201577890600, 398551, 398.551.
  • [Fitment]Car Air Heater Ducting Pipe Outlet suitab....
Check Stock

Birmingfive 2.4-Inch Air Duct, 3.2-Feet Flexible Aluminum Ducting Foil Car Heater Duct Vent Warm Air Outlet For Webasto(Black)

  • APPLICATION: Hot and cold, air duct suitable for Diesel heater for Webasto, for Domestic, for Planer, etc,suitable for any 60mm outlet hose..
  • FOR WEBASTO DOMETIC: Warm Heater Duct Pipe Air Ducting Hose For Webasto Dometic, Retractable Car Air Ducting Hose Vent, Hot & Cold Air Ducting Ventilation Air Hose, Heater Duct Pipe, Vent Warm Air Outlet Aluminum Foil Replacement Hose Extendable Pipe..
  • HIGH QUALITY: Made of aluminum foil material, durable and practical to use. Anti-impact, corrosion and flame retardant..
  • PACKAGE & SIZE: 1pc x Air Ducting Hose, Diameter: About 60mm..
  • FLEXIBLE AND EASY TO USE: 2.4 Inch Duct is super flexible and easy to install, it will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector.This Ventilation Duct is 2.4 Inches in diameter and comes in one 3.2 Feet Long Piece, which can be cut into as many pieces as you need using a wire cutter and a paper knife..
Check Stock

Universal Car Air Intake Pipe, 63mm 2.5\ Modified Air Intake Flexible Expansion Pipe Ducting Silicone Hose

  • Compatible with Universal Cold Air Intake fits for most vehicles with intake/tube/hose size 63mm/2.5inch.
  • Designed for Designed for discharging cold or hot air from car engine compartment and braking system. Air intake Expansion Pipe is very flexible ducting and easy installation.
  • Extendable Easy to buckle and good tensile. It can extend to 1 meter, easy to use. Air intake Expansion Pipe is very flexible ducting and easy installation.
  • Durable Made of high quality silicone. heat-resistant, excellent electric insulating and waterproof. Bore size 63mm. Please check the size before purchasing.
  • Quality Warranty Friendly return policy and customer service. Any questions, please feel free to contact with us.
Check Stock

MIAHART 6 inch Hose Clamp Adjustable 304 Stainless Steel Duct Clamps Worm Gear Adjustable 141mm-165mm Hose Clamp (Pack of 6)

  • Package includes 6pcs 6-inch hose clamps,adjusts diameter from 141mm - 165mm(5.5-6.5inch).
  • Design: can lock the hose very tightly, leak-proof, and ensure of clamps long-lasting, lock construction.
  • Material: made of 304 stainless steel, corrosion-resistant, will not rust for long-term use.
  • Easy to use: use a screwdriver to loosen or tighten the screw of hose clips then adjust the size, Secures ducting tightly in place(Note: the screwdriver not included).
  • Application：6 inch duct clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines in automotive, industrial, mechanical, agriculture, boat/marine, shield, household, etc.
Check Stock

PEROMI 4 Pack 304 Stainless Steel T-Bolt Hose Clamps, Working Range 17mm-19mm for 3/4 Inch Hose ID, Heavy Duty Hose Clamps

  • [ABOUT SIZE] Turbo pipe clamps adjustable range 17-19mm(0.67-0.75”), thickness: 0.6mm(0.024”), band width: 18mm(0.7”), screw: M5 x 40mm. Please measure the outside diameter of the pipe before purchase our pipe clamp..
  • [HIGH QUALITY MATTERIAL] T-bolt hose clamp(including the band, housing and screw) is made of 304 stainless steel with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
  • [EASY TO INSTALL] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [WIDE APPLICATION] T-bolt clamps can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..
  • [UNIQUE DESIGN] Folding turn edging process of the band, these clamps prevent the sharp edges from cutting the pipeline, can protect your tubes better..
Check Stock

Hon&Guan 4 Inch Square Air Vent, ABS Grille Cover White Soffit Vent for Bathroom Office Kitchen Ventilation(100mm)

  • Ventilation Grill Cover is made of high quality ABS..
  • Diameter 100mm,ducting height 55mm, pannel size:185*185mm.
  • 10mm slim panel, you can adjust the air inlet size by moving the gray plate..
  • Panel and gray ducting are detachable,easy to clean and maintain daily..
  • Wall mounted or ceiling mounted,perfect for bathroom,office,room exhaust and ventilation use..
Check Stock

LOKMAN 2.5 Inch Stainless Steel Duct Clamp Worm Gear Adjustable 46-70mm Hose Clamp Pack of 10 2.5 Inch

  • 304 STAINLESS STEEL HOSE CLAMP- The whole large duct clamp (including the band, housing and screw) are all made of premium 304 stainless steel. Durable, strong and rust resistant..
  • FLEXIBLE ADJUSTABLE SIZE RANGE- 2.5 inch hose clamps are flexible and ductile with wide adjustable size range from 46-70mm. Fit for hose outside diameter 46-70mm/1.8-2.7inch. Secures ducting tightly in place..
  • WIDELY USE- Clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, shield, household etc. Both indoor or outdoor..
  • GREAT VALUE - LOKMAN large quantity set products achieve great favorable price. The large quantity, the more favorable price. You can't miss it if you need a large bunches..
  • ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
Check Stock

Harapu 4 Inch Duct Clamp, Stainless Steel Large Hose Clamp Adjustable Diameter 91-114mm Worm Drive Clamp for Plumbing Dryer Vent for Automotive Mechanical Agriculture, 2 Pack

  • Please NOTE: Size is for diameter, NOT for circumference. 304 Stainless Steel Hose Clamp: Made of premium 304 stainless steel. Durable, strong and rust resistant..
  • Adjustable Size Range: 4 inch diameter hose clamps are flexible and ductile with wide adjustable size range from 91-114mm. Fit for hose outside diameter 91-114mm/3.6-4.5inch. Secures ducting tightly in place..
  • Wide Application: Clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, shield, household etc. Both indoor or outdoor..
  • Environmental Friendly: It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
  • Package Contents: 2 packs of 4 inch stainless steel duct clamps included..
Check Stock

Hose Clamp 10 Pack 304 Stainless Steel Adjustable 6-51mm Range Worm Gear Hose Clamp Fuel Pipe Clamps for Automobiles Pipelines and Mechanical Application

  • Durable Material: made of high quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, ​strong,Clamps are sturdy, durable and long lasting use..
  • Size Range-The hose clamp is flexible and extensible, with adjustable width, and the size range is from 6-51mm (1 / 4in-2in). The hose clamp width ranges from 8mm to 12mm, suitable for fixing pipes of various sizes.Fit Hose Diameter: 6-12mm, 9-16mm, 13-19mm,18-29mm, 27-51mm（5 sizes and 10 pcs)Handy and fulfill your multi needs..
  • Easy to use: use a screwdriver to loosen or tighten the screw of hose clips then adjust the size, Secures ducting tightly in place.enough for your spare and replacement in daily life around you house, garage, lawn and garden..
  • Widely used- Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc.These stainless steel hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage..
  • We believe that our high quality Hose Clamp will exceed your expectations. If you have questions, please contact us any time. We will try our best to solve your problems..
Check Stock

LOKMAN 10 Pack 3 Inch Stainless Steel Hose Clamps Worm Gear Duct Clamps Adjustable from 3 inch - 3.5 inch/ 75-90mm Fuel Line Hose Pipe Clamp for Dryer Vent Hose

  • Size is for DIAMETER, NOT FOR circumference.-304 Stainless Steel Hose Clamps- The whole large duct clamp (including the band, housing and screw) are all made of premium 304 stainless steel. Durable, strong and rust resistant..
  • Flexible adjustable size range- 3 inch hose clamps are flexible and ductile with wide adjustable size range from 75-90mm. Fit for hose outside diameter 3 inch - 3.5 inch/ 75-90mm. Secures ducting tightly in place..
  • Widely Use- Clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, shield, household etc. Both indoor or outdoor..
  • Great Value - LOKMAN large quantity set products achieve great favorable price. The large quantity, the more favorable price. You can't miss it if you need a large bunches..
  • Environmentally Friendly- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
Check Stock

YS-100 Auto PVC Heat-shrink Tube Cable Pipe Cutter Cutting Machine Cut Width100mm (110V)

  • In order to arrange shipment for you ASAP, please answer the following questions: ---1.What material is the pipe you want to cut? Is the pipe made of hose or hard pipe? It would be better if you could provide a picture of the pipe ---2.What is the total length of the pipe? How long do you want to cut each? ---3.Please tell us the width of the tube and the wall thickness on one side..
  • Cutting length: 0.1 - 9999.9mm，Cut speed: 100-120cut/ minute (50mm).
  • Blade width: 100mm， Max Cutting Diameter: 22 mm.
  • Can cut PVC pipe, heat shrinkable pipe, glass fiber pipe, silicone pipe, PTFE pipe, etc..
  • Multi-material cutting, high-quality guide strip discharge more smoothly, ensure cutting accuracy..
  • Use a special utility knife to ensure that the interface is flush..
Check Stock

4\ Axial Exhaust Fan, HoseVary 3000RPM 120mm DC Dual Ball Bearings Air Exhaust Vent Muffin Fan for DIY Cooling Project (120mm to 4\ Duct Adapter)

  • ... Testing fan shall be hung in clean air . Noise background＜18dB . The average service life of the fan can be estimated when 90% of the fan can operate normally after aging under the rated voltage,25℃,65%RH dust-free environment.
  • MULTIPLE-APPLICATION: To meet the various applications as need, the kit included two ducting ends to mount in round pipes, such as growing tent, 3D laser experiment, 3D cutting ventilation, 3D spray paint to exhausting bad airs or help cooling. Using directly with the casing fan by two sides of mounting meshes equipped in any small areas or square pipes..
  • PRACTICAL KIT: Package included: 1 * DC12V Axial Fan (120x38mm),1 * 3V~12V US Plug Power Adapter, 2 * Metal Ducting Adapters (for 4-inch hose / pipe), 2 * Black Metal Meshes, 8 * Fastened Screws , 1 * English / Japanese User Manual. The "Hose Vary" team will response within 24-hour reply and make the product warranty within 6~12 months..
Check Stock

Vent Systems 4\ inch Elbow 90 degree Duct Pipe Connector Flexible Round Tube Ventilation Hose ABS Plastic 100 mm

  • Made of High Quality ABS Plastic and perfectly designed for home improvement, DIY and Trade.
  • Flexible Coupling, Male Fitting for a 4 Inch pipe - Compatible with Round Pipe, Flexible Hose and other pipe, 90 degree elbow.
  • Easy to install - fit perfectly with any other pipe, vent and connector. Push-fit duct and fittings together..
  • Elastic 90 degree Elbow Ducting Pipe Connector is simple to adjust and connect with pipe..
  • Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability..
Check Stock