Reviews 100mm Ducting One Way Valves

Birmingfive 2.4-Inch Air Duct, 3.2-Feet Flexible Aluminum Ducting Foil Car Heater Duct Vent Warm Air Outlet For Webasto(Black)

  • APPLICATION: Hot and cold, air duct suitable for Diesel heater for Webasto, for Domestic, for Planer, etc,suitable for any 60mm outlet hose..
  • FOR WEBASTO DOMETIC: Warm Heater Duct Pipe Air Ducting Hose For Webasto Dometic, Retractable Car Air Ducting Hose Vent, Hot & Cold Air Ducting Ventilation Air Hose, Heater Duct Pipe, Vent Warm Air Outlet Aluminum Foil Replacement Hose Extendable Pipe..
  • HIGH QUALITY: Made of aluminum foil material, durable and practical to use. Anti-impact, corrosion and flame retardant..
  • PACKAGE & SIZE: 1pc x Air Ducting Hose, Diameter: About 60mm..
  • FLEXIBLE AND EASY TO USE: 2.4 Inch Duct is super flexible and easy to install, it will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector.This Ventilation Duct is 2.4 Inches in diameter and comes in one 3.2 Feet Long Piece, which can be cut into as many pieces as you need using a wire cutter and a paper knife..
Check Stock

Whamisa Fresh Cactus Bouncy Serum New Novel Deep Skin Moisturization and Nourishing Serum Featuring 99.47% Opuntia Ficus-Indica Cactus Extract 1.1 Fl Oz

  • ★Powerful Functions--The system is not only characteristic of high and low pressure cleaning function. The non-dismantle fuel injector cleaner kit....
  • ★Wondeful Design: The non-dismantle cleaner Autool C100 has a special handling one-way valves to seal up gas and durable pressure regulating valves.....
  • ★ EFI-Electrenic Fuel Injection System-- There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with....
  • ★Wide Range of Application: The injector clean kits of C100 include many different kinds of adapter, cover almost all the EU,Asia,USA cars and light....
  • ★The Advantage of Autool C100-- Can operate non-dismantle cleaning to Fuel System，it Can operate cleaning Air Induction System, Optional pipe....
Check Stock

60mm Preheater Hose Air Inlet Pipe,Air Duct Drain Hose Car Heater Duct Vent Warm Air Outlet for 2000/6000 W Air Heaters, Aluminum Foil Heater Duct Pipe Car Air Ducting Hose/1pc

  • 【Aluminum Foil Heater Duct】- Made of high quality aluminum foil material, durable and practical to use. Anti-shock, corrosion, flame resistant, Car Heater Pipe Auto Aluminum Foil Flexible Air Ducting..
  • 【Hot & Cold Air Ducting Hose, Car Warm Heater Duct Pipe Air Ducting Replacement】- Hot & cold air ducting,for Domestic, for Planer etc. Perfect to replacement the old or broken Heater Duct. Vent Warm Air Outlet Aluminum Foil Replacement Hose Extendable Pipe..
  • 【Retractable Car Air Heater Duct Pipe】- Extendable 60, 75 mm diameter air inlet pipe can be extendable up to 800 mm.42mm extendable:42 mm diameter air inlet pipe can be extendable up to 1000 mm..
  • 【Three diameters】-Three diameters, suitable for most outlet hose to meet your needs..
  • 【Occasions】- Mainly used for 2000 W or 6000 W air heaters.Hot and cold, air ducting for heater, etc..
Check Stock

uxcell Nickel-Plated Copper One Way Air Check Valve G 1/4 Female Threaded Full Port Check Valve 2Pcs

  • Function: the check valves are applicable for fluid systems to prevent countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air.
  • Material and size: the one way check valves are made of PVDF, sturdy, wear-resistant and durable for long-term use.
  • Each check valve measures 6.3 mm/ 1/4 inches, the total length is 38 mm/ 1.50 inches.
  • Features: the pipe port of the check valve is designed with a pagoda-shaped card slot, non-slip and non-toxic, with good airtightness and good adsorption performance.
  • Easy to install: the non-return check valve is easy to install, convenient for you to unscrew and replace.
  • Application: the non-return check valves are widely applied for automotive parts, machinery industry, household appliances, agriculture, etc..
Check Stock

TerraBloom 12\ (315mm) Air Duct - 8 FT Long, Black Flexible Ducting with 2 Clamps, 4 Layer HVAC Ventilation Air Hose - Great for Grow Tents, Dryer Rooms, House Vent Register Lines

  • 12" (315mm) ID LIGHTPROOF DUCTING : This flexible aluminum duct is designed to fit 12.3" (313mm OD) fans and filters. Thick layer of Black PVC on this ducting prevents light leaks and improves puncture resistance. Works with exhaust and intake fans, carbon filters and hooded lights which are 12-12.3" in diameter.
  • 4-LAYER TOUGH: Keep your ventilation system free of rips and pin holes. Under the Black PVC layer our ducting is built with 2 layers of Aluminum Foil With a layer of PET and Steel Wire Helix to preserve the shape.
  • FLEXIBLE AND EASY TO USE: Our 12 Inch Duct is super flexible and easy to install, it will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector. We include a pair of 12 Inch Clamps to make the installation a breeze.
  • 12" (315mm) DIAMETER WITH ADJUSTABLE LENGTH: This Ventilation Duct is 12 Inches in diameter and comes in one 8 Feet Long Piece, which can be cut into as many pieces as you need using a wire cutter and a paper knife.
  • VARIETY OF APPLICATIONS: Our Ducting Is suitable for any Heating Ventilation & Air Conditioning (HVAC) Purposes. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moistu....
Check Stock

CPS Solenoid Valve Magnet Tool #TLMKC18, Original Version (CPS - TLMKC18)

  • Solenoid Valve Troubleshooting Magnet, 18Mm.
  • Direct Connect Or Pilot Operated 2-Way Solenoids.
Check Stock

2Pcs 12 ft Dryer Vent Hose, 4 Inch Flexible Ducting Hose Aluminum Dryer Vent Hose with 4 Stainless Steel Clamps for Universal Tumble Dryer, Cothes Dryer

  • 4 INCH 12FT VENT DUCT HOSE - 2 pcs 12 ft double aluminum foil inside + thick PVC film dyer vent hose, good for lightproof, the steel wire helix to preserve the shape, keep your ventilation system free of rips and pin holes..
  • FLEXIBLE VENT DCUT HOSE - Air ducting flexible enough for your HVAC systems, it can be contorted and manipulated into various shapes and tight spaces, reducing the ventilation resistance and the leak of wind..
  • WIDELY APPLICATION - Our Ducting is suitable for any Heating Ventilation & Air Conditioning (HVAC), Kitchens, Dryer Rooms, Bathrooms (Smell and Moisture Exhaust), Greenhouses, Grow Rooms and Tents, etc..
  • PACKAGE INCLUDE - 2 x Ducting Hose (4 inch x 12 FT/100 mm x 3.66 m), 4x Stainless Steel Clamps, it is recommended to install together with hose clamp for reducing the gap between hose and equipment..
  • 100% PROMISE - BUY IT NOW! If there is any problems to make you unsatisfied with our products, WENCHENG provides full money refund or replacement..
Check Stock

iPower 6 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 6\

  • Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
  • Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 6 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock

CPR Savers and First Aid Supply One-Way Disposable Training Valves for Micromask CPR Training (1)

  • BLOCKS CONTAMINANTS: CPR Savers and First Aid Supply’s 50-Pack One-Way Micromask Training Valves are an important, and inexpensive piece to the CPR training experience. It contains a one-way filter that blocks the flow of contaminants, helping the user keep proper hygiene during CPR training..
  • REALISTIC EXPERIENCE: Our training valves fit all standard CPR Masks (Adult, Infant, and Child) and simulates the function of a real CPR valve, leading to a realistic CPR training experience when paired with a CPR mask, and other standard CPR training equipment..
  • COST-EFFECTIVE: CPR Savers and First Aid Supply’s 50-Pack One-Way Micromask Training Valves are built to save you money in comparison to buying in smaller quantities, with each valve costing less than a dollar you can use those savings toward other necessary CPR training equipment that you might need..
  • EASY TO SET UP: Just insert our training valves into any CPR Mask with the filter side up. Once you’ve ensured proper air flow, you can then put the mask on any cpr training manikin. Exhale into the valve, and make sure the manikin’s chest rises for feedback on whether or not you’ve used the mask and valve correctly. Once done, throw these disposable valves away and use a new one..
Check Stock

Prox Racing Parts 28.2423-1 Titanium Replacement Exhaust Valve

  • Fits: Yamaha YZ 450 F 2003-2009, WR 450 F 2003-2013, YFZ 450 2004-2009, YFZ 450 R 2009-2013.
  • ProX titanium valves are forged in one piece for extra strength and greater durability than OEM Titanium Valves.
  • Uses a special Ti3Al alloy for better performance under high temperatures.
  • CrN coating for extra hardness and less friction between valves and guides.
Check Stock

8MILELAKE Automotive Fuel System Fuel Injector Cleaner Tool Set Fuel System Cleaning Assistant Non-dismantle

  • Non-dismantle cleaner has special handling one-way valves to seal up gas and durable pressure regulating valves.
  • Has anti-corrosion, anti-friction connectors for fast-connection and anti-friction oil tubes for all cleaning fluid.
  • Working Temperature: -10℃~+50℃ (14℉~122℉).
  • Special handling one-way valves, able to seal up gas.
  • Includes many different adapters, covering almost all the EU, Asia, USA cars and light trucks(petrol 12V).
Check Stock

Mudder 4 Way Sillcock Key Plated Steel Water Keys with 4 Way Utility Gas Meter Keys Faucet Wrench Tool for Opening and Closing Sillcock or Spigots (Silver)

  • Size of silcock water key: 4 way sillcock key can fit most sillcock, stopcock and valves, such as 1/4 inches (6.4 mm), 9/32 inches (7.1 mm), 5/16 inches (7.9 mm) and 11/32 inches (9.0 mm), easy to use to open and close sillcocks or spigots, which can be applied in place of sillcock handles.
  • Control Use of Water: four way water key allows you to control water usage, an ideal helper to keep in your emergency preparedness kit, convenient and easy to use.
  • Multi Functional Water Key Tool: 4 way faucet key is made of quality zinc alloy, sturdy and reliable, solid construction allows you to apply it for a long time.
  • The multi functional keys can serve as practical wrench to turn the screws, also ideal for many valves of electric, water, gas, train, cabinet, elevator, etc.
  • 4 Way sillcock key wrench: utility gas meter key has 4 ends with different shapes, including 2 square shapes, 1 triangle and 1 key shape (please refer to the picture), which is functional and can be applied so long as according to the size and shape.
  • What you get: you will receive 1 piece of 4 way sillcock water key, 1 p....
Check Stock

iPower 4 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 4", HVAC Extractor Fan Vent, Range Hoods

  • ... Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 4 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock