Reviews 10 32 Screws

Fixed Torque Drive 5NM Orange

  • ACCURACY: +/- 2 inch/pounds up to 40 inch/pounds.
  • 40 – 65 is +/- 5%. The FAT wrench measures 2 L x 2 W x 6.25 H inches and the storage case measures 7.5 L x 5.5 W x 1.75 H inches.
  • EASE OF USE: Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field.
  • RELIABLE: Torque adjustment range from 10 inch/pounds to 65 inch/pounds.
  • DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”.
  • INCLUDES: 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx and Leupold specialty flat blade), ¼” socket and a convenient plastic storage case.
  • LONGTERM USE: Always return to the lowest inch/pound setting after use.
  • GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler. Please contact Wheeler customer service for assistance.
Check Stock

2\ Dia., 3/8-16, Blind Tapped Hole, Steel, Knurled Knob, Reid Select (1 Each)

  • 10 pack/pieces knurled head solid brass thumb screws with straight shoulders and flat tips.
  • The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening..
  • Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16.
  • Made from solid brass which is a corrosion-resistant alloy..
  • Specifications: 1/4-20 threads, Head diameter: .750 inches, Head height: .3125 inches, Shoulder diameter: .500 inches, Shoulder height: .1875 inches, Thread length: 2.50 inches..
Check Stock

MCMASKE #2-56#4-40#6-32#8-32#10-24 1/4 -20 5/16 -18 UNC 304 Stainless Steel Socket Head Cap Screws Assortment Kit

  • They are coarse thread.Screws Thread Diameter: #2,Thread Pitch: 56 Per Inch.
  • #6,Thread Pitch: 32 Per Inch.#8,Thread Pitch: 32 Per InchThread.
  • 304 stainless steel have good chemical resistance and may be mildly magnetic.
  • The assortments contain the following sizes:#2-56x3/16"(20PCS).
  • The #2-56 to 5/16"-18 UNC 304 Stainless Steel Socket Head Cap Screws Kit are includes most common SAE standard sizes so you can easily replace a lost screw.
  • Packed in a plastic box,Easy to install and durable to use.
Check Stock

10 Pack 10-32 x 1 Inch Threads 303 Stainless Steel Diamond Knurled Thumb Screws Knobs with Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated

  • 10 pack/pieces knurled head 303 stainless steel thumb screws with shoulders and flat tips.
  • The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening..
  • Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16.
  • Made from 303 stainless steel (SS) which is a strong, corrosion-resistant alloy with excellent resistance to heat. 303 SS is designed to be used in high-stress, outdoor and corrosive applications..
  • Specifications: 10-32 threads, Head diameter: .500 inches, Head height: .250 inches, Shoulder diameter: .375 inches, Shoulder height: .1875 inches, Thread length: 1.00 inches..
Check Stock

HanTof 440Pcs 22 Sizes,4#-40 to 1/4\-20 Standard SAE Allen Head Socket Hex Grub Screw Assortment Kit,Internal Hex Drive Cup-Point Set Screws Set with 5pcs Hex Wrenches,12.9 Class Alloy Steel-Black

  • 003cb003e22 Sizes:003c/b003e Each Sizes 20pcs,total 440pcs Standard SAE Allen Socket Head Hex Grub Screw Assortment Kit ,Internal Hex Drive Cup-Point Set Screws with 5pcs Hex Drive.
  • 003cb003eDurable material:003c/b003e12.9 Class Ultra Hard and Durable Alloy Steel, providing the good resisitance to corrosion and high temperature good tensile strength, durable..
  • 003cb003eSet Includes:003c/b003e #4-40x1/8".
  • 003cb003eWIDE APPLICATIONS:003c/b003eSuitable for door handles, faucet, light fixture, knobs, armament repair, plumber and other small repairs around the shop, garage or home..
  • 003cb003eCharacter:003c/b003e Set includes most common SAE standard sizes so you can easily replace a lost screw.
  • All kinds of headless cup points grub screws are in plastic bags and organized in a plastic box to keep them neat,Easy to install and durable to use.
Check Stock

Klein Tools 63118 Bolt Cutter, Fiberglass Handle, 18-Inch

  • Individually tested to meet or exceed ASTM F1505-16 and IEC 60900:2018 standards for insulated tools.
  • Cuts, strips and loops both 10-18 solid and 12-20 stranded AWG wire and cleanly shears 6-32 and 8-32 screws.
  • Hardened steel with precision ground stripping holes for easy removal of insulation.
  • Cuts, strips, loops and gauges both 10-18 solid and 12-20 stranded AWG wire.
  • Cleanly shears 6-32 and 8-32 screws strong gripping serrated nose for bending, shaping and pulling of wire.
Check Stock

Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement Bits and Storage Case for Scope Mounting Gunsmithing and Maintenance

  • ACCURACY: +/- 2 inch/pounds up to 40 inch/pounds.
  • 40 – 65 is +/- 5%. The FAT wrench measures 2 L x 2 W x 6.25 H inches and the storage case measures 7.5 L x 5.5 W x 1.75 H inches.
  • EASE OF USE: Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field.
  • RELIABLE: Torque adjustment range from 10 inch/pounds to 65 inch/pounds.
  • DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”.
  • INCLUDES: 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx and Leupold specialty flat blade), ¼” socket and a convenient plastic storage case.
Check Stock

10 Pack 8-32 x 1/2 Inch Threads 303 Stainless Steel Diamond Knurled Thumb Screws Knobs with Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated

  • 10 pack/pieces knurled head 303 stainless steel thumb screws with shoulders and flat tips.
  • The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening..
  • Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16.
  • Made from 303 stainless steel (SS) which is a strong, corrosion-resistant alloy with excellent resistance to heat. 303 SS is designed to be used in high-stress, outdoor and corrosive applications..
  • Specifications: 8-32 threads, Head diameter.
  • .4375 inches, Head height: .250 inches, Shoulder diameter: .3125 inches, Shoulder height: .125 inches, Thread length: .500 inches..
Check Stock

10 Pack 8-32 x 3/4 Inch Threads 303 Stainless Steel Diamond Knurled Thumb Screws Knobs with Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated

  • 10 pack/pieces knurled head 303 stainless steel thumb screws with shoulders and flat tips.
  • The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening..
  • Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16.
  • Made from 303 stainless steel (SS) which is a strong, corrosion-resistant alloy with excellent resistance to heat. 303 SS is designed to be used in high-stress, outdoor and corrosive applications..
  • Specifications: 8-32 threads, Head diameter: .4375 inches, Head height: .250 inches, Shoulder diameter: .3125 inches, Shoulder height: .125 inches, Thread length: .750 inches..
Check Stock

10 Pack Solid Brass Diamond Knurled Thumb Screws Knobs with Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated (10-32 x 3/8 inch Long Threads)

  • 10 pack/pieces knurled head solid brass thumb screws with straight shoulders and flat tips.
  • The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening..
  • Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16.
  • Made from solid brass which is a corrosion-resistant alloy..
Check Stock

Monoprice 4U 7(H) x 19(W) x 12(D) Inches Wall Mount Bracket (108627), Black

  • Mounts to walls with standard 16" On-center studs or to brick/cement walls.
Check Stock

RackPath 1U 4-Post Server Rack Rail, 20.2-32 Inch Adjustable Depth - 110lbs Capacity

  • Contents: 4-Post server rack rail set x1, 12-24 screws x10, M6 screws x10, M6 plastic washers x10, M6 cage nuts x10.
  • Dimensions: 1.75 in H x 3.46 in W x (20.2 – 32) in D.
  • Adjustable mounting depth allows you accommodate various rack sizes up to 32 inches.
  • constructed from heavy duty cold rolled steel with a durable black electro-static powder coated finish.
  • Fits standard 19’’ 4-post rack and cabinet.
Check Stock

JR Products GSNI-2300-150 Gas Spring

  • 150A Common BusBar with 10 screws and a cover (part number 2300).
  • Max voltage: 300V AC/ 48V DC, Continuous Rating: 130A AC/ 150A DC.
  • Terminal Screws: 10 x #8-32, Terminal Studs: 2 x 1/4"-20.
  • Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity and corrision resistance.
Check Stock