Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow
- Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
- Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
- Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
- Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
- Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check StockEZ-Fluid Plumbing 3/8-Inch O.D Female Compression x 3/8-Inch O.D Male Comp A Lead-Free Brass Quarter Turn Water Shut Off Straight Repair Add On Stop Ball Valve,Chrome For Kitchen,Bathroom Faucet 1Pc
- EZ-FLUID Plumbing Chrome Brass Water Shut Off Valve, Straight Angle Stop Valve Use for Kitchen, Bathroom Faucet Water Valves and Toilet Water Valve.
- Lead-Free Quarter Turn Ball Valve Straight Angle Stops 3/8-Inch Female O.D. Compression Captured Nut x Outlet: 3/8-Inch O.D. Male Comp w/ Brass nuts....
- Fits on top of faulty valves to provide a shut off quick fix.
- Lead free Chrome Finished brass approved product in all states.
- Pack of 1 pc 1/4 turn straight add on angle stop repair water shutoff ball valve Approved By UPC, NSF.
Check Stock
Aupoko R134A Valve Core Quick Remover Installer, High Low Pressure Valve Core Remover Tools Kit for R13A Refrigerant Air Conditioner System
- ★ USEFUL TOOL KIT ---- This valve core remover tools Kit includes high pressure (Red) and low pressure valve core quick remover installer, 1 pc valve core remover, 5pc R134a valve cores and 5pc 5V1 valve cores..
- ★ HIGH & LOW PRESSURE QUICK COUPLER ---- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
- ★ ADJUSTABLE ---- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
- ★ WELL-DESIGN ---- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
- ★ 1 YEAR WARRANTY ---- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
- easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, should be there any question, please feel free to contact us..
Check StockENGWE Bike Pump with Presta & Schrader Valves 100 PSI Bicycle Pump for Electric Bike Tire Pump Mini Bike Air Pump Handheld Portable Bike Pump Universal Small High Pressure Ball Needle Accessories
- 【Fits All Bike’s Tires】This mini bike pump comes with dual valves of Presta & Schrader, all kinds of the bike tire was proper for this bike pump....
- 【100 PSI & Hose For Inflate Effortlessly】This tire pump for bike has designed with a mini size, but works with the high air pressure up to 100....
- 【Including Sports Ball Needle】Not only with the dual tire valves, this air pump for bike has including the regular ball needle, for various sports....
- 【Hanging on Frame】You can hanging the bicycle tire pump on the bike frame steady with the free holder and screws, so never worry about the....
- 【Package Included】1 x Small Bike Pump, 1 x Bike Frame Holder, 1 x Schrader Valves, 1 x Presta Valves, 1 x Needle for Ball Inflate, 2 x Screws..
Check Stock
YOUYOUTE Bike Repair Kits with Pressure Gauge Pump, Mini Bicycle Pump 120 PSI with Smart Valve, Fits Schrader Presta, Bike Flat Tire Repair Tools with Bag (Upgrade Smart Valve + Pressure Gauge)
- ...n and easy to carry. With a 120 PSI capacity, Quick Pumping Power with Pressure Gauge! It can be used to inflate bike tires during emergency repairs or simply to maintain tire pressure over the course of a season..
- Super Smart Valve:Compatible with both Presta and Schrader valves, no need to switch, one valve fit all. no leaks, firmly grips both Schrader and Presta valves automatically..
- Ultra Lightweight : Portable tire pump is almost weightless(only 160g) and extremely compact that can be attached to the bike frame under the water bottle cage easy..
- Full Range Of Accessories: Comes with a bicycle tire repair kit,16 in 1 Multi-Function Bike Tools/ 2pc tire levers/ 6pc Tire glueless repair tool/ 1pc metal tire rasp and along with a pair of handy tire levers and a ball needle/inflation valve for Inflatable toys,basketballs, footballs, soccer balls & more..
- WITH PORTABLE BIKE BAG, LIGHTWEIGHT: Packed all the tools in the portable bike bag, hang on your bike tube or frame. If you are planning short or long bike trips, this bike repair kit will be a good choice, it can accompany yo....
Check Stock2 PCS Stainless Steel Ball Valves TWOZOZO Ball Valve Standard 60 Degree Female NPT Ball Valve with Raw Material Belts 1 Ball Valves
- High Quality: TWOZOZO Stainless Steel Ball Valves Are Made Of High Quality Materials And Have Good Ductility To Effectively Avoid Cracking..
- US Standard Threads: This Ball Valve Uses NPT 60 Degree Us Standard Threads, Please Fit Your Thread Diameter When Purchasing..
- Wide Applications - Ball valves are widely used in mechanical equipment, industrial equipment, water supply and drainage equipment, for example in....
- Easy To Use: Our Ball Valves Come With A Roll Of Raw Material, So You Don't Have To Re-purchase Them And You Can Install Our Ball Valves As Soon As....
- High Performance - The internal passage of the drain tap is straight for optimum and complete passage and therefore has a low flow resistance. The....
Check Stock
PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention
- 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
- 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
- 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
- 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
- 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check StockMini Ball Valve 1inch NPT Female Male Thread 316 Stainless Steel Air Liquid Steam Shut-Off Valve
- MATERIAL: this ball valve is made of 316 stainless stell material for higher corrosion resistance.
- TWO DIRECTIONS: Inline valve for connecting two pipes going in the same direction.
- Double-seal system allows flow to go in either direction.
- WIDE APPLICATION: our steel Ball valves can be widely used in various air, liquid, and steam applications.
- EASY TO OPERATE: Ball valves is designed with On/ Off switch and quarter-turn easy operation for manual control.
- CONNECTION: 1 inch standard connections, which makes mini ball valve suitable for most pipes.
Check Stock
Water Filter Float Ball Valve 1/4 Inch Adjustable Float Valve Plastic Water Tank Float Valves for Ponds, Water Pump, Water Trough, Aquariums, Aquaculture, Water Tank, Reservoir (4)
- Size and material: you can connect float valves to the 1/ 4 inch supply tube, you can install an appropriate number of water float valves according to the size of the water tank to meet your needs in different situations.
- The ball of the water float valve is made of PE material, the other parts are made of POM material, low temperature resistance and corrosion resistance, durable and non-toxic, can serve you for a long time.
- Adjustable design: the plastic water tank float valves come with adjustable arms, when the water level of the water tank is low, the gate of the float valve opens to ensure that water can enter, when the water level rises, the ball of the water float valve and the adjustable arm will form a flat angle and close in this state, realizing the automatic adjustment of high water level and low water level.
- Wide applications: the adjustable sink float valve can be applied for ponds, small water tanks, toilet storage tanks, household water purifiers, pools, aquariums, aquaculture, reservoirs, industrial and large water tanks, etc., if needed, you can choose to use multiple float valves at the same time, so that water can be input faster.
- Easy to operate: the angle of the valve ball is adjustable, you can flexibly set according to the requir....
Check StockEastman 60245 Crimp PEX Dual Washing Machine Outlet Box 1/2" Connection White
- CONNECTION: 1/2-inch Crimp PEX (F10807) inlet connection and 3/4-inch Male Hose Thread (MHT) outlet.
- BUILD: Sturdy construction made of heavy-duty plastic with 1/4- turn ball valves installed.
- DESIGN: It has a right or left side drain connection. It can also be installed inverted for top-mount valves.
- CONTENTS: Includes installed hot and cold water valves, support bracket, faceplate Snap-on frame accommodates up to 1″ drywall.
- EASY INSTALLATION: This outlet box is designed for recessed residential applications.
Check Stock
6 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R12 R22 to R134A Adapters 6015 R134A Refrigerant Tank Adapter 6014 Vacuum Pump Adapter
- Package includes: you will receive 3 pieces R12 R22 to R134A vacuum pump adapters refrigerant tank adapters, and 3 pieces air conditioning refrigerant angled compact ball valves, easy to match and convenient for your replacement.
- Angled ball valves: in the package are 45 degree angle manual shut-off valves with 1/4 inch SAE male and female fitting.
- For quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar).
- Vacuum pump adapters: these adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools.
- Easy to install: you can just tighten the adapter and get a good seal easily with hand, the adapters feature quick and easy connection and disconnection with high flow.
- The ball valve can applied to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or manifold, useful tools for HVAC, AC, car air condition maintenance.
- Confident to use: made of copper, all angled ball valves and adapters in the package are durable for long-term service, provide simple and easy operation and installation, strong sealing for du....
Check StockHydro Master Washing Machine Outlet Box, Washing Stop Valves with Water Hammer Arrestor
- 1/2-inch NPSM inlet connection and 3/4-inch Male Hose Thread (MHT) outlet.
- Includes 1/4-Turn hot and cold ball valves with water hammer arresters installed, support bracket, and a Snap-On faceplate cover.
Check Stock
4Pcs 1/8' NPT Tank Valve, A.I.FORCE Air Compressor Tank Fill Valve with Anti-Corrosion Brass Schrader Valve and Caps, 4Pcs Extra Replacement Valve Stems Cores and Schrader Valve Tool
- [WHAT YOU GET] – You will get 4Pcs 1/8" NPT Tank Valve with built-in Schrader valves and valve caps, 4Pcs Extra Replacement Valve Stems Cores and 1Pc Schrader Valve Tool..
- [MAIN FUNCTION] – The air compressor box filling valves can prevent air from leaking out while allowing for air to pass through for inflation. The 4 extra Schrader Valves work for replacement valve core. With Schrader Valve Tool, we can tighten the valve core or replace Schrader Valve if there is a leakage..
- [WIDE APPLICATION] - The 1/8" Male NPT Tank Valves are used for air compressor tanks to fill vessels with air. Through the Tank valve, we can fill up the vessels with our air compressors in a rapidly speed..
- [SPECIFICATIONS] – The air tank valves with 1/8'' NPT Male Threads and Schrader Valve. Max working pressure 200psig and Do not Exceed Maximum pressure. Teflon or similar tape can be used during install on the threaded area that screws into the tank etc..
- [HEAVY DUTY DESIGN] – The 1/8 schrader valves are made of solid brass, which is durable, rustproof and durable. Nickel plating valve stem core can effectively prevent rust and corrosion..
Check Stock
