Reviews 1 Cimc Trailer

CURT 80176 44-Inch Vinyl-Coated Trailer Safety Cables, 17/32-In Snap Hooks, 7,500 lbs Break Strength, 2-Pack , Black

  • DEPENDABLE SAFETY. These trailer safety cables are designed to connect from your trailer to your vehicle to help resist complete vehicle-trailer separation in the event of a disconnection while towing.
  • HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack.
  • SUPERIOR DURABILITY. These trailer safety cables are constructed from 3/8-inch diameter, high-strength steel cable and are protected with a vinyl coating to resist rust and corrosion in spite of the outdoor elements.
  • HIGH-STRENGTH. These trailer cables have a minimum break force of 7,500 lbs. (two trailer safety chains or cables advised.
  • each safety cable must meet or exceed the gross trailer weight).
  • READY TO COUPLE. For safe, secure coupling to the vehicle, these 44-inch long trailer cables come with two pre-attached safety chain hooks. The 17/32-inch snap hooks feature a spring-loaded lever for enhanced security.
Check Stock

CURT 45405 Trailer Hitch Receiver Adapter Reducer Sleeve, 2-1/2 to 2-Inch

  • VERSATILE ADAPTER. This trailer hitch adapter sleeve easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-1/2-inch receiver and accepts a 2-inch shank.
  • STANDARD FIT. This trailer hitch receiver adapter measures 2-1/2-inch x 2-1/2-inch to fit any industry-standard 2-1/2-inch trailer hitch receiver. It also accepts any industry-standard 2-inch x 2-inch shank.
  • SOLID STRENGTH. This hitch receiver reducer adapter is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch.
  • CORROSION-RESISTANT. This trailer hitch reducer sleeve is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch reducer sleeve is fast and easy. You can use it as needed by simply inserting it into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check Stock

CURT 80151 44-1/2-Inch Vinyl-Coated Trailer Safety Cables, 7/16-In Snap Hooks, 5,000 lbs Break Strength, 2-Pack

  • DEPENDABLE SAFETY. These trailer safety cables are designed to connect from your trailer to your vehicle to help resist complete vehicle-trailer separation in the event of a disconnection while towing.
  • HIGHLY VERSATILE. Add versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard, square 1-1/4-inch receiver hitch and comes with a ball mount with a 3/4-inch ball hole to connect a small trailer.
  • SUPERIOR DURABILITY. These trailer safety cables are constructed from 5/16-inch diameter, high-strength steel cable and are protected with a vinyl coating to resist rust and corrosion in spite of the outdoor elements.
  • HIGH-STRENGTH. These trailer cables have a minimum break force of 5,000 lbs. (two trailer safety chains or cables advised.
  • each safety cable must meet or exceed the gross trailer weight).
  • READY TO COUPLE. For safe, secure coupling to the vehicle, these 44-1/2-inch long trailer cables come with two pre-attached safety chain hooks. The 7/16-inch snap hooks feature a spring-loaded lever for enhanced security.
Check Stock

CURT 45148 Trailer Hitch Mount, 2-Inch Ball, Pin, Fits 1-1/4-In Receiver, 3,500 lbs, 3-1/4\ Drop, GLOSS BLACK POWDER COAT

  • DEPENDABLE STRENGTH. Rated to tow 3,500 pounds gross trailer weight and 350 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed).
  • VERSATILE USE. This trailer hitch ball mount comes with a 1-1/4-inch shank to fit virtually any industry-standard 1-1/4-inch receiver. The ball mount has a 3-1/4-inch drop, 2-inch diameter ball, 1/2-inch hitch pin hole and 7-1/4-inch overall length.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 1-1/4-inch hitch receiver. The rounded shank makes installation easy.
Check Stock

Titan Attachments 3 Point, Category 1 Tractor Drawbar Trailer Hitch Receiver Att

  • HEAVYDUTY DESIGN: The Titan Attachments HeavyDuty Cat 1 3Pt Trailer Hitch Receiver is constructed with 2 x 2inch tubular steel..
  • CAT 1 LIFT PINS AND TOP LINK PIN INCLUDED: The trailer hitch frame will come equipped with 2 lower Category 1 lift pins. It will also come equipped with the Cat 1 top link pin. The lower lift pins and top link pin are 2inch wide..
  • SAVE TIME AND MONEY: The black 3 point trailer hitch for Category 1 tractor hitches is perfect for moving trailers around your land. Load your trailer with the various attachments you need, connect it to the 3 point trailer hitch and tow it behind your tractor. No need to waste time and money making multiple trips to get your tiller, landscape rake, chipper, and mower. Bring them all together at one time..
  • POWDERCOATED STEEL: The Cat 1 Tractor Trailer Hitch is powdercoated black. The powder coating helps protect the attachment from rust and corrosion, keeping it looking and performing like new!.
Check Stock

CURT 25128 Straight Tongue Trailer Coupler for 2-Inch Channel 1-7/8-In Hitch Ball 2,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto a 2-inch wide trailer tongue beam and couple to any standard 1-7/8-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 1 trailer coupler and has a capacity of 2,000 lbs. gross trailer weight and 200 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

Partsam Red Clearance ID BAR Marker Light 3 Light 9 LED Trailer Sealed Stainless Steel, Sealed 3-Light Truck and Trailer Identification LED Light Bar Red Led Strip w/Black Base

  • Partsam (1 x Red ) Waterproof truck trailer Identification Light Bar, long-lasting stainless steel black bracket base, stainless hardware included. three-light, 3-LEDs each marker light, totally 9LEDs, Red Lens Red LED Light.
  • This Truck Trailer ID Light bar is great for trailer applications more than 80" wide.
  • This red clearance light bar is sealed and waterproof. Size: 350mm x 30mm x 26mm (14.17" x 1.18" x 1.1").
  • Installation scews are included. This IP67 Waterproof trailer light bar is always ready for different kinds of weather attack, and also withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weathe.
  • EAST TO INSTALL: The red strip light bar contains a single lead wire for power and is grounded through the mounting hardware. Anyone of the three screws is the Negative and Red wire is the Positive end.
  • Three replaceable 3-LED trailer light bar is universal for 12V Vehicles: Trucks, trailers, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, motorhome, pickups etc..
  • You can mount this 3 led light bar on the top of your truck trailer or between the tailgate taillights to draw extra visibility to your wide trailer for added on-road safety.
Check Stock

MYCAN Trailer Hitch Ball Mount Forged Solid Steel Fits 2 1/2' Receiver Hitch Class 5 Hitch Ball Mount Towing 2' Drop, 1/2' Rise 20,000 lbs 1-1/4' Hole Commercial Duty MCFT252

  • Heavy Duty Forged Steel: MYCAN trailer hitch ball mount is constructed from high-strength solid forged steel and this hitch ball mount is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • 2 Inch Drop and 1/2 Inch Rise: MYCAN Towing ball mounts comes with a 2-1/2-inch x 2-1/2-inch shank to fit virtually any industry-standard 2-1/2-inch trailer hitch receiver. The tow ball mount also has a 4-inch drop and 2-1/2-inch rise to promote level towing.
  • 2 1/2 Receiver Hitch: Hitching up your trailer is easy with this 2 1/2 inch ball mount. MYCAN forged trailer hitch ball mount features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank.
  • Corrosion-Resistant: For long-lasting use, this trailer hitch ball mount 2 1/2 inch is with highly durable carbide black powder coat finish, solid trailer hitch ball mount easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • Easy to Install: To install this class 5 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2 1/2 inch trialer hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin.
Check Stock

CURT 45372 Forged Trailer Hitch Mount with 2-5/16-Inch Ball & Pin, Fits 2-1/2-Inch Receiver, 20,000 lbs, 4-in Drop , Black

  • DEPENDABLE STRENGTH. Rated to tow 20,000 pounds gross trailer weight and 2,000 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-1/2-inch x 2-1/2-inch shank to fit virtually any industry-standard 2-1/2-inch receiver. The ball mount has a 4-inch drop, 2-5/16-inch diameter ball and 5/8-inch pin hole.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-1/2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.
Check Stock

CURT 28570 Direct Weld On Heavy-Duty Trailer Jack, 8,000 lbs. 15-1/4 Inches Vertical Travel, Black

  • HEAVY-DUTY STRENGTH. This heavy-duty trailer jack is rated to support up to 8,000 pounds trailer tongue weight (7,000 pounds lift capacity).
  • VERTICAL RANGE. This trailer tongue jack allows for 15-1/4 inches of vertical movement and can be fully retracted for towing (24-1/4-inch retracted height, 39-1/2-inch extended height).
  • EASY OPERATION. This heavy-duty trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat finish.
  • SECURE INSTALL. This heavy-duty trailer jack is designed to be welded directly onto the trailer tongue (hardware not included).
Check Stock

LIBRA 7000# 7k Tandem Trailer Axle Suspension Kit Leaf Spring/U-Bolt/Hanger Kit

  • 3,500lbs capacity per each spring, for standard 7,000lbs trailer axle , Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
  • It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
  • Include 5,200-7,000lbs axle U-bolt kit for 3" dia round trailer axle, Kit include: 4 x 7" long U bolts, U bolts dia. 1/2".
  • 2 x tie plates for 1-3/4" or 2" leaf springs.
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock

CURT 45572 Euro Trailer Hitch Mount with 2-Inch Ball Fits 1-1/4-Inch Receiver 3,500 lbs 4-5/8-Inch Height

  • DEPENDABLE STRENGTH. Rated to tow 3,500 pounds gross trailer weight and 350 pounds tongue weight, this one-piece, European-style ball hitch offers....
  • VERSATILE USE. This trailer hitch ball mount comes with a 1-1/4-inch x 1-1/4-inch shank to fit virtually any industry-standard 1-1/4-inch receiver.....
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a permanently attached 2-inch diameter....
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a highly durable carbide black powder coat finish, and the trailer ball....
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 1-1/4-inch hitch receiver. The....
Check Stock

LIBRA 3500lb Tandem Trailer Axle Suspension Kit Leaf Springs U-Bolt & Hanger Kit

  • 1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
  • It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
  • Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock