Reviews 1 4 Inch Boring Bar

NEW 9 pcs 1/2

  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
  • Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
  • Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
Check Stock

4\ BORING HEAD SET 6 PCs CARBIDE BORING BAR WITH R8 SHANK 4 INCH BORING 1'' MILL

Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

YOYO TOOLS Lathe Turning Tools S08K-SCLCR06 Boring Bar and 5pcs CCMT060204 CCMT2 1.5 Carbide Inserts CNC Lathe Turning Tool S08K-SCLCR06 + 5pcs CCMT060204

  • CCMT060204 CCMT2(1.5) Carbide Inserts : carbide material with CVD coating ,used for machining stainless steel and steel parts.
  • Internal boring bar holder : High quality Steel Durable for Long , strong and durable ,95 degree right hand internal boring bar turning holder, the....
  • Shank Diameter : S08K-SCLCR06: 8mm/0.315'' , Overall Length: 125mm/4.92'' , T8 wrench , M2.5*6 screw , 95 degree right hand internal boring bar....
  • Widely Use: used for Cutting Steel parts and Stainless Steel, simple structure, often used for small hole machining..
  • Package Include : 1Pc S08K-SCLCR06 lathe boring bar with 5pcs CCMT060204 CCMT2(1.5)Carbide Inserts, T8 wrench, M2.5*6 screw.
Check Stock

Auliuakz Boring Bar Set,9pcs HSS Material 1/2 inches Round Shank Boring Bar Set Machine Tool Accessories

  • Boring Bar Set:Made of high quality HSS material, high hardness, wear resistance and heat resistance..
  • Boring Bar Set:9 kinds of boring bar of different lengths to meet your different needs..
  • Boring Bar Set:Boring bar can be used on boring machine, lathe or milling machine..
  • Boring Bar Set:Excellent workmanship to ensure high accuracy..
  • Boring Bar Set:The handle of boring bar is thicker, more durable..
Check Stock

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

  • For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
  • Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
  • Equipped with a split bushing to accommodate a boring bar of smaller diameter.
  • Precision ground and hardened. Completely sealed for maintenance free operation.
Check Stock

9pcs 2 Boring Head R8 Shank 1/2 Carbide Boring Bar Set Milling

  • 2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
  • Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
  • Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

2\ BORING HEAD STRAIGHT SHANK AND 9 PC 1/2\ BORING BAR SET

  • Case overall dim: 8''L x 9''W x 2-1/2''H.
Check Stock

ASZLBYM SNR0013M16 CNC Lathe Internal Threading Boring Bar Turning Tool Holder With 10pcs 16IR AG60 Carbide turning insert

  • ♥Package includes :1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench.
  • ♥SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
  • ♥ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥16IR AG60 carbide inserts : 16IR AG60 inserts are made of carbide and the coating material is TiN , processing pitch range : 0.5~3.0mm.
  • ♥16IR AG60 carbide inserts Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

MT2 Boring Shank, Mt2-1-1/2-18- (m10) Manganese Steel Boring Bar CNC Lathe Tool Inch Boring Head Shank Connecting Rod

  • HIGH-QUALITY MATERIALS: The boring bar is made of high-quality manganese steel to improve durability and service life..
  • SCOPE OF APPLICATION: Boring bar for CNC lathes with 1/2 "boring head. It can be used for boring, round, end face, step hole, inner hole end face, cutting inner hole and annular groove on the outer circle, etc..
  • ACCURATE THREAD: The thread of the boring bar is accurate and can be tightly connected with the boring head..
  • EXQUISITE WORKMANSHIP: The connecting rod of the British boring head handle is very smooth, professional and practical appearance design, easy to use..
  • HIGH STABILITY: MT2 bracket is stable, accurate and high stability, very stable during work, and reliable tools..
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock