Reviews 0 3mm Nozzle

ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer (Bonus: 2pcs hex Key Wrenches)

  • 5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer).
  • Nozzle Throat Tube: Material - Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.
Check Stock

Danco 81086 Slip Joint Washer Assortment, Plastic, White

  • [Size] - 19mm(0.75 Inch) OD 13mm(0.5 Inch) ID 3mm(0.12 Inch) Thickness.
  • [Function] - Replacing the washers will create a better seal and help prevent leaks for the future.
  • [Application] - Fit for garden hoses and 3/4 inch faucet to filter sand and gravel to reduce the possibility of nozzle clogging.
  • [Advantage] - The rubber washer with stainless steel filter mesh can serve as a flow restrictor, reduce the water waste effectively.
  • [NOTE] - Please confirm the required size and material before purchase, and put it in the right place.
Check Stock

eSUN 3mm Black PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Black

  • 1KG net (approximately 2.2 lbs) Filament with Black Spool.
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid unnecessary returns..
  • Recommended Extrusion/Nozzle Temperature 210C - 225C, about 20 Celsius higher than regular PLA..
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 3mm Fire Engine Red PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Fire Engine Red, (Pantone 199C)

  • 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid wasting of shipping...
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool, Fire Engine Red, Pantone 199C.
  • Recommended Extrusion/Nozzle Temperature 210C - 225C, about 20 Celsius higher than regular PLA..
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

INCREWAY 3pcs Silicone Heater Block Cover High Temperature Resistance Silicone Socks for V6 E3D Printer Extruder Hotend，Black

  • Size of Heater Block: 20*16*12mm. Inner Hole for Heater Tube: 6mm, for thermocouple/ thermistor: 3mm.
  • High Quality Material: Made of solid aluminum material with sandblasting oxidation treatment, durable in use.
  • Inner Hole: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple).
  • Nozzle: Suitable nozzle: M6 Screw thread and it works perfect with nozzle and nozzle throat.
  • Application: Accept Nozzle with M6 screw thread for Reprap.
Check Stock

Vacuum Sealer Machine for Food Savers Automatic and Manual Mode MS-180,Power Upgrade Constant Stability Nozzle Type Smooth Bag Adaptation Air Inflation & Deflation,Dry & Moist & Crisp High Power Sealing

  • [Upgrade Dual-Pump & Dual-Nozzle] Power upgraded by double pumps and nozzles. providing twice power compared with popular single nozzle sealers. One....
  • [Constant Stability] New designed cooling system ensures long and stable working performance. Perfect for heavy workload that requires long working....
  • [Extra-wide Sealing Line] 8mm (0.315 Inch) sealing line provides performance superior to popular 3mm line of other sealers. Adjustable sealing....
  • [For Moist & Liquid] Special designed canister to contain liquid from deflation, avoiding common circuit fault in liquid vacuum sealing. Separate....
  • [Inflation & Deflation Pump] High power vac pump ensures ideal vac inflation experiences.
  • Air inflation mode makes crisps preserved and complete.
Check Stock

Micro Swiss Plated Wear Resistant Nozzle for LulzBot TAZ 5 TAZ 6 LulzBot Mini Hexagon Hotend .3mm

  • Nozzle for LulzBot TAZ 5, LulzBot TAZ 6, LulzBot Mini, Hexagon Hotend.
  • Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT.
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • Nozzle Cleaning Kit: you will get 32 ​​MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock

YXQ Round Nozzles 1/4PT Thread Plastic Flexible Water Oil Coolant Pipe Hose Adjustable Flexible Body, Light Weight and Easy to Install with Any Direction and Angle, 12-Piece

  • Plastic flexible body, light weight and easy to install with any direction and angle.
  • Thread External Diameter: Approx. 1/4PT (13mm).
  • Round Nozzle Inside Diameter: Approx. 0.1'' (3mm).
  • Widely used for lathe, milling, CNC machine, hydraulic machinery and water cooling system.
Check Stock

5 Pieces Spray Tips Reversible Spray Tip Airless Spray Nozzles for Airless Paint Spray Guns and Airless Sprayer Spraying Machine (211, 313, 415, 517, 623)

  • Nice Compatibility: these paint sprayer tips are compatible with most airless paint sprayers, and 211, 313, 415, 517, 623 correspond to the nozzle diameters of 0.011 inches, 0.013 inches, 0.015 inches, 0.017 inches, 0.023 inches, and the spray range is 4 to 14 inches.
  • Considerate Combination: you will get 5 airless sprayer spraying machine parts of different sizes, namely 211, 313, 415, 517, 623.
  • Each is equipped with an airless nozzle and a nozzle seal.
  • Different model combinations can better meet your different needs.
  • Broad Utilization: spray tips with a variety of models to choose from to meet your different use needs, such as paint, furniture, fences, home decoration, industrial fine paint and decoration and so on.
  • Also they are applicable for various surfaces and materials, such as industrial enamel, varnish, water based paint, internal and external wall latex paint, fireproof coating.
  • Easy Installation: no tools are required to install, and airless spray nozzle can be easily installed on the spray gun in a few simple steps.
  • First, use the nozzle to seal the nozzle into the protective seat, then insert the nozzle into the protective seat and rotate to complete the installation, time saving and labor saving for your project.
Check Stock

Zhengmy 5 Pcs Spray Tips Reversible Airless Paint Sprayer Nozzle and Gun Filter Replace for Machine (209,311,415,515,623)

  • Considerate Combination: you will get 5 pieces of black airless sprayer tips and 5 pieces of airless spray gun filters.
  • Each tip is equipped with an airless spray nozzle and a nozzle seal.
  • The universal design makes them suitable for most airless spraying machine products on the market.
  • Nice Compatibility: these paint sprayer tips are compatible with most airless paint sprayers, and 209, 311, 415, 515, 623 correspond to the nozzle diameters of 0.009 inches, 0.011 inches, 0.015 inches, 0.015 inches, 0.023 inches, and the spray range is 4 to 14 inches.
  • Quality to Use: reversible airless spray tip is composed of quality metal and plastic, and its tip seal is made of stainless steel tip gasket and nylon, the total length of the filter screen is about 3.94 inches/ 10 cm, the mesh is uniform, and it is resistant to compression, simple to clean, and can be cleaned by rotating the nozzle, which are designed for replacing airless spray gun filter elements, spray gun accessories.
  • Easy Installation: no tools are required to install our reversible airless paint sprayer nozzle tip, and airless spray nozzle can be easily installed on the spray gun in a few simple steps.
  • First, use the nozzle to seal the nozzle into the protective seat, then insert the nozzle into the....
Check Stock

Hicello 3/4\ Brass DN20 Fountain Nozzle Column Water Fountain Nozzle Sprinkler Spray Head for Garden Pond Bring Beautiful Visual Effects

  • Connection Size: Female G3/4(DN20, 25mm)Nozzle Size: Female G3/4 Nozzle: Approx. 97mm/3.82inch,G3/4" (DN20) Nozzle: Pressure: 50Kpa, Amount of water: 2.5 cubic meter/H, Spray height: 0.2-0.6, Cover the diameter: 0.4-0.8M,Package list: 1 x Fountain Nozzle.
  • The nozzle is made of quality brass material, corrosion resistant and durable, long service lifespan, beautiful brass golden color, high-grade looking..
  • This is a small to large injector nozzle generates a lively full water pattern and offers oxygen enrichment. With injector effect, water and air are suctioned in, mixed intensively and accelerated into the air by the injector jet as an impressive soft flowing fountain..
  • Applicable in the courtyard, garden, kitchen garden and another small area of agricultural spray irrigation.
  • lawn, green belts, gardens and another small area of gardening sprinkler.
  • sprinkler irrigation and industry, and another small area of cool roofs..
  • The nozzle can be adjusted towards different directions. Fan-shaped fountain nozzle to form a fan-shaped water column, which is pretty attractive when illuminated by underwater colorful lights at night..
Check Stock