Reviews Wood Hole Saws

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

  • Professional high speed steel M42 (not M3) with cobalt 8% cutting teeth hardened to control the efficient and durable and reliable use on workpieces like sheet metal, Aluminium, wood, plastic, plasterboard, etc.. HSS M42 teeth is particularly good for high strength metal such as stainless steel (HSS M3 ones are good for middle strength metal but not high strength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
  • 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
  • 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
  • arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
  • with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill ....
Check Stock

Chainsaw Chain Saw Cut Cutting Sawing Wood Tree Forest Horror Halloween Powertools Woodcutter Motor Rev Revving Sound Effects Sound Effect Sounds EFX Sfx FX Tools Power Tools - Chainsaws [Clean]

  • GET THE COMPLETE HOLE SAW KIT: Upgrade your woodwork, craft and power drill equipment with this complete hole saw bundle that includes 8 high carbon steel hole saws, a mandrel, a hex key and case..
  • THE SIZES OF THE HOLE SAW SET: The diameters of the 8 hole saw cutters are 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/8", 2-1/4", and 2-1/2", and they have a cutting depth of 1 inch..
  • FLAWLESS PRECISION DRILLING: Thanks to their high speed steel teeth and smooth cutting edges, these hole saws can cut through wood, PCV and plastic with high precision and create super clean cuts..
  • BUILT TO LAST A LIFETIME: Made with premium quality carbon steel and a nickel-plated coating, these drill hole saws are impact and wear resistant, durable and robust..
  • KEEP EVERYTHING ORGANIZED: This 10-piece power drill hole saw set comes in a practical, portable case that allows you to keep the drill hole saws organized and within easy reach when needed..
Check Stock

COMOWARE Bi-Metal Hole Saw Kit for Metal Wood PVC Board - 3/4\ to 2-1/2\ Set with 2 Mandrels & Spare Pilot Drill, 19 Pcs

  • Compatible Material: Plastic , Metal , Wood.
  • HIGH-QUALITY MATERIAL: Hole Saw Set is made of high quality Bi-Metal. The main body and the cutting edges of the bi-metal hole saw consist of two different tool steels (bi-metal). The main body consists of a special flexible steel and the teeth that cut the material are made of HSS..
  • SUPERIOR PERFORMANCE: The varied and fine toothing ensure that the hole saw does not get caught in the material and runs smoothly. Bi-metal hole saws have a larger number of cutting edges than carbide hole saws, which allow a clean cut..
  • WIDELY AND PROFESSIONEL USE: It is your ideal choice for DIY projects and household maintenance and repair. Suitable for metal, normal wood, thin PVC board, plastic..
  • SIZE INCLUDES:10 hole saws: 3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/4″, 2-1/2″ for needs in different situations, 1 x Spare Pilot Drill for replacement, 1 x Large Mandrel, 1 x Small Mandrel with Medium Adapter and 1 x Plastic Case for easy storage. The set includes the most popular hole saw sizes on the market to meet your different demands..
  • EASY ORGANIZATION: Set includes the hole saw kit holder with size index for easy storage and organizing. It is designed to keep all ....
Check Stock

BOSCH HBT263 BIMETAL Hole Saw 2-5/8

  • PROFESSIONAL HOLE SAW DESIGN – features improved durability, clean performance and easier plug removal in multiple materials.
  • ENHANCED M42 ALLOY – contains 8% cobalt alloy to withstand high-temperature applications, and it is stronger for cleaner cuts.
  • TRIANGLE CHIP-CLEARANCE SLOT DESIGN – improves efficiency of plug removal and reduces heat due to triangle shark tooth shape.
  • PROGRESSOR TOOTH DESIGN – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • REINFORCED SHOULDERS – provide added strength and longer life to the hole saws.
Check Stock

BOSCH HBT106 BIMETAL Hole Saw 1-1/16

  • PROFESSIONAL HOLE SAW DESIGN – features improved durability, clean performance and easier plug removal in multiple materials.
  • ENHANCED M42 ALLOY – contains 8% cobalt alloy to withstand high-temperature applications, and it is stronger for cleaner cuts.
  • TRIANGLE CHIP-CLEARANCE SLOT DESIGN – improves efficiency of plug removal and reduces heat due to triangle shark tooth shape.
  • PROGRESSOR TOOTH DESIGN – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • REINFORCED SHOULDERS – provide added strength and longer life to the hole saws.
Check Stock

Ryker Hole Saw Kit with Arbors and Replacement Drill Bits, Heavy Duty Steel Construction for Boring Wood, Aluminum, Metal, or PVC, Plumbing and DIY Carpentry (Bi Metal - Metal Hole Saw Kit)

  • General Purpose Bi-Metal Hole Saw Set This professional-grade hole saw kit for construction, woodworking, plumbing, and DIY carpentry includes versatile tools for drilling or boring holes including 7 hole saws, arbors, and replacement drill bits..
  • Ultra-Sharp Steel Teeth Our metal hole saws are designed with strong, precision cobalt steel to withstand heavy-duty use on metal, wood, PVC pipes, drywall, plywood, sheet metal, aluminum, plastic, pipes, and other non-ferrous materials..
  • Optimized Hole Saw Cutting Sizes Not every job needs the same size hole which means you need a quick solution to get the job done right the first time. We included 25/32, 1, 1 , 1 9/16, 1 , 2 3/8, and 2 11/16 saws in every tool kit..
  • Low RPM to High-Torque Reliability We use long-lasting cobalt steel in our hole saws to ensure smoother drilling and boring on almost any surface. That makes them ideal for plumbers working with a variety of different metals and materials..
  • Compact, Protective Storage Case Every Ryker Hardware bi-metal hole saw set comes with a rugged storage case to help keep your tools neatly organized and protect them from weather and dirt on the jobsite. A smart choice for home or construction use..
Check Stock

Hole Saw 6 1/8” (155mm) for Wood, HSS Bi-Metal Hole Cutter with Pilot Drill Bit for Plywood, Cornhole, Ceiling and Drywall

  • ...rbide technology and optimized tooth geometry allow our hole saw to provide faster and accurate cutting than standard hole saws, the diameter errors of the cut hole are less than a millimeter..
  • ⚙️【MORE EFFICIENCY】The slug holes around the saw are able to remove the wood chips while cutting, reduce friction heat, improve the efficiency. And the due to the fact that less of total amount of material is actually cut, much less power is required, longer battery life of power tools is benefited..
  • ⚙️【TRUST to PURCHASE】 Provide 60 days free return and replace service to make sure our customers’ satisfaction with every purchase. If you haven gotten imperfect Hole Saws, just contact us via email directly, we will be responsible for the quality of our products and reply in 16h, just enjoy your purchase..
Check Stock

Amazon Basics Drill and Driver Multi-Bit Set - 100-Piece

  • 100-piece drill and driver multi-bit set.
  • ideal for metal, wood, plastic, masonry, and hole saws.
  • Includes 52 bits, 8 nut sockets, a magnetic bit holder, 4 hole saws, and more (scroll down the page for a full list of included pieces).
  • Made of durable, wear-resistant alloy steel with quenching treatment.
  • Sturdy plastic case provides designated storage space and easy transport.
Check Stock

Bosch HBT400 4 In. Bi-Metal T-Slot Hole Saw

  • PROFESSIONAL HOLE SAW DESIGN – features improved durability, clean performance and easier plug removal in multiple materials.
  • ENHANCED M42 ALLOY – contains 8% cobalt alloy to withstand high-temperature applications, and it is stronger for cleaner cuts.
  • TRIANGLE CHIP-CLEARANCE SLOT DESIGN – improves efficiency of plug removal and reduces heat due to triangle shark tooth shape.
  • PROGRESSOR TOOTH DESIGN – hole saws feature alternating teeth size for performance, cutting faster and lasting longer in wood, metal and plastic materials.
  • REINFORCED SHOULDERS – provide added strength and longer life to the hole saws.
Check Stock

ASTP&FH 2-3/4\ Hole Saw with Arbor Mandrel ,HSS Bi-Metal & Heavy Duty Steel Design, for Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass,Aluminum,Iron and Wood（70 mm）

  • ... performance. with higher hardness , higher toughness, higher cutting strength and stronger wear resistance..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic.Hole saws can cut 2.5 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Upgraded design with ultra sharp serrations,Increased wall thickness of hole saw improves durability and minimizes tooth loss,Drilling with sharper Positive Rake Tooth cuts material faster than other brand.more durable with longer life than other brand hole saws..
  • High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design，With the non-binding clean edge design,ensures smooth and clean cutting of the hole saw blade.The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
  • ASTP&FH is committed to providing consumers with 100% satisfaction. Our goal is always to create perfect products for consumers Please cont....
Check Stock

MILWAUKEE 2-1/4 in. Hole Dozer with C

  • Longest Life in Stainless Steel | Carbide Teeth for 50X Life in Extreme Materials.
  • Milwaukee Carbide Teeth Technology | For the toughest applications where bi-metal hole saws cannot cut.
  • Outperforms Bi-metal hole saws | 4tpi Carbide Teeth Design gives Best Durability and Longest Life in Extreme Applications.
  • Thermoset Coating reduces friction and drag, increasing overall speed and cordless efficiencies | Plug-Jack T-Slot's enhance user productivity by providing best access and leverage to remove material slugs.
  • Cuts Stainless Steel, Fastener Embedded Wood, Cement Board, Fiberglass, Plaster, Asphalt Shingles and More | Made in USA.
Check Stock

ASTP&FH 4-3/4 inch Hole Saw with Arbor Mandrel ,HSS Bi-Metal & Heavy Duty Steel Design, for Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass,Aluminum,Iron and Wood（120mm）

  • ... performance. with higher hardness , higher toughness, higher cutting strength and stronger wear resistance..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic.Hole saws can cut 2.5 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Upgraded design with ultra sharp serrations,Increased wall thickness of hole saw improves durability and minimizes tooth loss,Drilling with sharper Positive Rake Tooth cuts material faster than other brand.more durable with longer life than other brand hole saws..
  • High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design，With the non-binding clean edge design,ensures smooth and clean cutting of the hole saw blade.The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
  • ASTP&FH is committed to providing consumers with 100% satisfaction. Our goal is always to create perfect products for consumers Please cont....
Check Stock

Freud DHS4BITII 1/4'' HSS Pilot Bit - Quantity 5

  • One-size fits all Snap-Lock mandrel fits all Diablo hole saws from 5/8-inch to 6-inches in diameter..
  • Snap-Lock mandrel system for a quick and easy change with no down time..
  • 60mm (2-3/8 in) cutting depth for deeper holes in one pass and increased productivity..
  • These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass, tool-free plug ejection and Variable Tooth Design for faster cuts..
  • Steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal Note: Cannot be used for concrete, tiles and stone..
Check Stock