Reviews Semi structural Rivets

E3-8-ST Steel Tubular Rivet, 3/16\ Diameter X 1/4\ Length, Oval Head (.375 Dia. X .060), ZINC Finish (Pack of 100)

  • Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched..
  • Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole.
  • Rivets can also be used with a rivet cap to improve appearance of clinched end..
  • Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward..
Check Stock

Yinpecly 0.24\x 0.71\(D x H) Aluminum Flat Head Semi Tubular Rivets for Fasten Work Pieces Silver Tone 50pcs

  • Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched..
  • Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole.
  • Rivets can also be used with a rivet cap to improve appearance of clinched end..
  • Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward..
Check Stock

100pcs Aluminum Oval Head Semi-Tubular Rivets - 3/32\X1/4\ OHTR332140

  • Semi-tubular rivets can be employed for multiple applications, such as luggage, brakes, and 3 ring binders.
  • Excellent fasteners to quickly and inexpensively join work-piece materials together.
  • Low cost installation tools available - Part number: HT-171.
  • These rivets are a low-profile professional fastener and are less visible than screws..
Check Stock

Louisville Ladder FS1504 Ladder Step FBRGLS TYPE1A 4FT, 4-Feet, Orange (Renewed)

  • The product is 4 foot fiberglass type 1A stepladder.
  • Molded top with handyman’s tool slots, molded-in slots help keep tools close at hand.
  • 300 pound load capacity, includes weight of user and tools.
  • Each step secured with six, large headed, semi-tubular steel rivets for maximum strength.
  • Nonconductive full channel rails are covered with a polyester veil for years of durable service.
  • Heavy duty bottom back brace provides additional strength to the bottom of the ladder.
  • 300 Lbs, load capacity, includes weight of user and tools. Multifunctional Raptor Top With Multiple Tool Slots And Magnet.
Check Stock

Louisville Ladder FS1510 Fiberglass Step Ladder, 10 Feet, Orange

  • SUPERIOR BUILD: This 10-foot stepladder is made of superior quality, non-conductive fiberglass, helping to keep you safe when around electricity..
  • STURDY AND STRONG: With its 300-Pound capacity, elegant design and smooth finish, you won’t find a more durable, reliable ladder..
  • DESIGNED FOR YOUR NEEDS: Molded top with recessed tray and handyman's tool slots, nonconductive structural molded top improves productivity by keep tools with you at the top of the ladder.
  • PROTECTED: Inside spreader braces keep your ladder protected while in transport as well as provide as safe and stable ladder.
  • MEETS OR EXCEEDS INDUSTRY STANDARDS: Louisville Ladder commitment to your safety requires we meet or exceed all safety standards set by ANSI and OSHA.
  • Louisville exclusive Pro Top design, 300-pound load capacity includes weight of user and tools.
  • Does Not Include magnet tray, hardware tray, curved front, drill and tool slots, paint bucket holder, and pipe holder.
  • Each step secured with six, large-headed, semi-tubular steel rivets for maximum strength.
  • Nonconductive full channel rails are covered with a polyester veil for years of durable service.
  • Meets or exceeds ANSI and OSHA safety standards.
Check Stock

100 Pcs 9/64\X3/16\ Stainless Steel Truss Head Semi-Tubular Rivets Super-Deals-Shop

  • Semi-tubular rivets are often the preferred rivet style for joints where movement is required (pivot points), because the rivet material only swells at the tail. Common applications for tubular rivets include light fixtures, HVAC ducts, electronics, ladders, and brakes, among many others..
Check Stock

Louisville Ladder FS1503 300-Pound Duty Rating Fiberglass Step Ladder, 3-Feet

  • Fiberglass is non-conductive when clean and dry.
  • 300 Lbs, load capacity, includes weight of user and tools.
  • Double rivet step xonstruction, each step secured with six, large headed, semi-tubular steel rivets for maximum strength, 30% greater shear strength than solid aluminum rivets.
  • Inside spreader braces, spreader braces inside fiberglass rails help keep braces from getting hooked or abused during transit.
  • The ladder meets or exceeds the safety standards set by ANSI, American National Standards Institute and OSHA, Occupational Safety and Health Administration.
Check Stock

Louisville FS1502 Fiberglass Heavy Duty Step Ladder, 28 3/8", 2-Step, Orange

  • Fiberglass is non-conductive when clean and dry.
  • 300 Lbs, load capacity, includes weight of user and tools.
  • Double rivet step construction, each step secured with six, large headed, semi-tubular steel rivets for maximum strength, 30 percent greater shear strength than solid aluminum rivets.
  • Inside spreader braces, spreader braces inside fiberglass rails help keep braces from getting hooked or abused during transit.
  • The ladder meets or exceeds the safety standards set by ANSI, American National Standards Institute and OSHA, Occupational Safety and Health Administration.
Check Stock

Mardatt 240 Pcs 5 Sizes All Aluminum Large Flange Blind Rivets Set Round Dome Open Head Blinds Pop Rivets Assortment Kit with Storage Case for Joining Metal Plate Pipe Automotive

  • ...nd rivet head into it, use rivet gun to pull the mandrel through. Then, you can lock the rivet in place and get a strong fastening..
  • 【Provide A Strong Grip】 Sturdy, corrosion resistant and long lasting! They work well on various projects. The tubular body is smooth and neat for firm grip effect.
  • the thick flange structure prevent stripping effectively..
  • 【Multipurpose Fastener】They are commonly used in industrial riveting applications: construction, electronic, automotive, household repair and much more. Ideal for sheet metal works, such as hinges, fastening signs, shelves ect..
Check Stock

5/32\ x 1/4\ (DF11-8-ST) Steel Semi-Tubular Rivet with a 5/16\ Diameter Oval Head - Zinc Finish (Pack of 100)

  • Semi-tubular rivets can be employed for multiple applications, such as luggage, brakes, and 3 ring binders.
  • Excellent fasteners to quickly and inexpensively join work-piece materials together.
  • Low cost installation tools available - Part number: HT-178.
  • These rivets are a low-profile professional fastener and are less visible than screws..
Check Stock

Amerimax Home Products 2526419 Gutter Front Elbow, Two-by-Three, Brown

  • 2 in. X 3 in. Front elbow for use at the top and bottom of downspout to guide runoff towards the front and away from the wall and foundation of your structure.
  • Aluminum construction for Durability with a Brown baked-on factory finish for low maintenance.
  • Fits 2 in. X 3 in. Brown aluminum downspouts.
  • Attach with screws or pop rivets (not included).
  • Brown aluminum complements most house exteriors.
Check Stock

Louisville Ladder FS1508 Ladder, 8-Foot, Orange

  • ...NDUSTRY STANDARDS: Louisville Ladder is committed to meet or exceed all safety standards set by ANSI and OSHA.
  • Molded top with handyman’s tool slots, molded-in slots help keep tools close at hand.
  • 300-pound load capacity, includes weight of user and tools.
  • Each step secured with six large-head semi-tubular steel rivets for maximum strength.
  • Non-conductive full-channel rails are covered with a polyester veil for years of durable service.
  • Heavy-duty bottom back brace provides additional strength to the bottom of the ladder.
Check Stock

HIFESON Hand Rivet Nut Tool,Handy Rivnut Tool - Metric & SAE with 30pcs Steel Rivet Nuts，Rivet Nut Kit with Sturdy Case Packed, Designed for Tight Space

  • Patented structure increases power and leverage when setting POP blind rivets (not for threaded rivet nuts).
  • Shorter handle with double compound hinges that maximize leverage.
  • Shortest long arm riveter which can operate up to 1/4-Inch (6.4mm) stainless steel rivets.
  • One of our most versatile and powerful hand riveters, taking the hard work out of setting large diameter blind rivets.
Check Stock